Mechanical Engineering Exam  >  Mechanical Engineering Tests  >  Test: Governors - 3 - Mechanical Engineering MCQ

Test: Governors - 3 - Mechanical Engineering MCQ


Test Description

10 Questions MCQ Test - Test: Governors - 3

Test: Governors - 3 for Mechanical Engineering 2024 is part of Mechanical Engineering preparation. The Test: Governors - 3 questions and answers have been prepared according to the Mechanical Engineering exam syllabus.The Test: Governors - 3 MCQs are made for Mechanical Engineering 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Test: Governors - 3 below.
Solutions of Test: Governors - 3 questions in English are available as part of our course for Mechanical Engineering & Test: Governors - 3 solutions in Hindi for Mechanical Engineering course. Download more important topics, notes, lectures and mock test series for Mechanical Engineering Exam by signing up for free. Attempt Test: Governors - 3 | 10 questions in 30 minutes | Mock test for Mechanical Engineering preparation | Free important questions MCQ to study for Mechanical Engineering Exam | Download free PDF with solutions
Test: Governors - 3 - Question 1

For a given fractional change of speed. If the displacement of the sleeve is high, then the governor is said to be

Detailed Solution for Test: Governors - 3 - Question 1

A Governor is said to be sensitive when it readily responds to a small change of speed. The movement of the sleeve for a fractional change of speed is measure of sensitivity.

Test: Governors - 3 - Question 2

Effect of friction, at the sleeve of a centrifugal governor is to make it

Detailed Solution for Test: Governors - 3 - Question 2

Friction at the sleeve makes the governor less sensitive.

1 Crore+ students have signed up on EduRev. Have you? Download the App
Test: Governors - 3 - Question 3

The term “effort of governor” refers to

Detailed Solution for Test: Governors - 3 - Question 3

The effort of a governor is the mean force exerted at the sleeve for a given percentage change of speed.

Test: Governors - 3 - Question 4

Which one of the following statements is correct? A governor will be stable if the radius of rotation of the balls

Detailed Solution for Test: Governors - 3 - Question 4

For stable governor
F = Ar - B
and F = mrω2
∴ 

Test: Governors - 3 - Question 5

For a governor running at constant speed, what is the value of the force acting on the sleeve

Detailed Solution for Test: Governors - 3 - Question 5

When governor is running at constant speed, then the net force acting of sleeve is zero.

Test: Governors - 3 - Question 6

The problem of hunting of a centrifugal governor becomes very acute when the governor becomes

Detailed Solution for Test: Governors - 3 - Question 6

Sensitiveness of a governor is a desirable quality. However, if a governor is too sensitive, it may fluctuate continuously above and below the mean position, it is called hunting of governor.

Test: Governors - 3 - Question 7

The nature of the governors is shown by the graph between radius (r) of rotation and controlling force (f). Which of the following is an isochronous governor?.

Detailed Solution for Test: Governors - 3 - Question 7

For isochronous governor
f = ar
Hence plot will be

Test: Governors - 3 - Question 8

In a governor, the controlling force curve shows a relationship between

Detailed Solution for Test: Governors - 3 - Question 8

Controlling force curve is plotted between controlling force at y-axis and radius of rotation at x-axis.

Test: Governors - 3 - Question 9

The angular speed of a watt’s governor when its height is 20 cm, will be equal to

Detailed Solution for Test: Governors - 3 - Question 9


where, h = height of governor
N = RPM

Test: Governors - 3 - Question 10

In a spring-controlled governor the controlling force curve is straight line. The balls are 400 mm apart when the controlling force is 1600 N and they are 240 mm apart when the force is 800 N. To make the governor isochronous the initial tension must be increased by

Detailed Solution for Test: Governors - 3 - Question 10

The controlling force curve of a spring controlled governor is straight line and thus can be expressed as
f = ar+ b
when f = 1600 N, r = 400 mm
when f = 800 N, r = 240 mm
1600 = a(0.4) + b ...(i)
800 = a(0.24) + b ...(ii)
By solving (i) and (ii) we get
a = 5000 N/m
b = -400 N

To make the governor isochronous, the controlling force line must pass through the origin. This is possible only if the initial tension is increased by 400 N.

Information about Test: Governors - 3 Page
In this test you can find the Exam questions for Test: Governors - 3 solved & explained in the simplest way possible. Besides giving Questions and answers for Test: Governors - 3, EduRev gives you an ample number of Online tests for practice

Top Courses for Mechanical Engineering

Download as PDF

Top Courses for Mechanical Engineering