A solid circular shaft is subjected to bending moment M and twisting moment T. What is the equivalent twisting moment Te which will produce the same maximum shear stress as the above combination?
1 Crore+ students have signed up on EduRev. Have you? Download the App |
The principal stresses at a point in an elastic material are 60 N/mm2 tensile, 20 N/mm2 tensile and 50 N/mm2 compressive. If the material properties are: μ = 0.35 and E = 105 N/mm2 then the volumetric strain of the material is
The state of stress at a point in a body under plane state of stress condition is given by MPa . The maximum shear stress (in MPa) is
If at a point in a body σx = 70 MPa, σy = 60 MPa and τxy = - 5 MPa, then the radius of Mohr’s circle is equal to
The state of stress at a point in a loaded member is shown in figure below. The magnitude of maximum shear stress is
The cross-section of a bar is subjected to a uniaxial tensile stress 'p' The tangential stress on a plane inclined at θ to the cross-section of the bar would be
The figure shows the state of stress at a certain point in a stressed body. The magnitudes of normal stresses in the x and y directions are 100 MPa and 20 MPa respectively. The radius of Mohr’s stress circle representing this state of stress is
Match List-I (State of stress) with List-II (Kind of loading) and select the correct answer using the codes given below the lists:
List-I
List-II
1. Combined bending and torsion of circular shaft
2. Torsion of circular shaft
3. Thin cylinder subjected to internal pressure
4. The bar subjected to tensile force
Codes:
A B C D
(a) 2 1 3 4
(b) 3 4 2 1
(c) 2 4 3 1
(d) 3 1 2 4
Consider the Mohr’s circle shown below. What is the state of stress represented by this circle?