Test: ICMP (Internet Control Message Protocol) - Computer Science Engineering (CSE) MCQ

IP by itself does not provide the features of error reporting or error correction. So, to address these issues a network layer protocol called Internet Control Message Protocol is used. ICMP operates over the IP packet to provide error reporting functionality.

ICMP notifies the source about the error when an error is detected because the datagram knows information about source and destination IP address. The source can then retransmit the data again or try to correct those errors.

127.0.0.0 is a special address known as the loopback address which is used for testing purpose of a machine without actually communicating with a network. Thus no error reporting message will be generated for such special addresses.

Firstly, it informs the source that the datagram has been discarded. Secondly, it warns the source that there is congestion in the network. It’s type 4 error reporting message after which the source is expected to reduce the flow of packets.

The round-trip time refers to the total time taken combining the time taken for a packet sent from a source to reach a destination and the time taken the acknowledgement sent by the destination to reach the source. The Router sends destination unreachable message if the destination is not found.

Tracert is used in case of windows, whereas Traceroute in UNIX. Tracert is a program used to find the shortest route to the destination IP. The Router sends destination unreachable message if a path to the destination IP is not found.

An ICMP message has an 8-byte header and a variable size data section. Out of the 8 bytes, the first 4 bytes are of a fixed format having the type, code and checksum fields and the next 4 bytes depend upon the type of the message.

Router error is not a type of error-reporting message in ICMP. The type of error reporting message is specified in the ICMP header. Destination unreachable is type 3 error message, source quench is type 4, and time exceeded is type 11 error message.

Router sends destination unreachable message if the destination is not found. Destination unreachable is type 3 error reporting message. It is invoked when the router can’t find a path to the intended destination to forward the packet through.

This field will be decremented by 1 at every router, and will be zero by the time it reaches source. This error reporting message is type 11 and is used to prevent the router from travelling forever in case some unknown path anomaly occurs.