Civil Engineering (CE) Technical Mock Test CE (SSC JE)- 13 Free Online

The plan of a building is in the form of rectangle with centre line dimensions of the outer walls as 10.3 ×15.3 m. The thicknel of the walls is superstructure is 0.3 m. The carpet arean is

Pick up the item of work not included in the plinth area estimate.

The density of cement is taken to be

The size of a rivet is identified by

The maximum permissible stress for power drivenfield rivet in bearing on rivet is

The minimum clear cover (in mm) for the main reinforcement in column, according to IS : 456 -2000 is

the diamete of longitudinal bars of a RCC column should never be less than

In an RCC section of effective depth 'd' if vertical stirrups are provided to resist shear theirmaximum spacing measured along the axis of the member as per IS : 456 - 2000 should not exceed

Which of the beams given in the following is a determinate beam ?

The effective slenderness ratio of a cantileve coumn is

Moment of inertia of rectangular section shown if Fig. about its horizontal centroidal axis is

As the cement sets and hardens , it generated heat. This is called

For constructing road pavements, the type of cement generally used is

Aluminium is anodized to protect it from eathering effect by forming a surface coat of

Mild steel used in RCC structure conforms to

If whole circle bearing of a line is 2100º 0' 0", its value in quadranal bearing system is

The magnetic declination is the difference between

The maximum shear force in a simply supported  beam of span L, subjected to a central point load, W is given by the following expression :

If 'A' is the area of cross-section and 'I' is the moment of inertia of a given plane section, then
radius of gyration (r) is gien by the formula

Strain energy due to axial deformation is given by

s : resultant stress 
P : axial load
?: deformation 
e : strain
E : modulus of elasticity)

The ratio of the quantity of water stored in the root zone of the crops to the quantity of wateractually delivered in the field is known as

The global warming is caused mainly by

An aggregate is said to be flaky, if its leastdimension is less than

Separation of coarse aggregates from concret during transportation, is known as

If fineness modulus of a sand is 2.5, it is graded as

The dimension for Angular velocity is

Typically a hydroelectric plant will have following bydraulic machine:

Darcy Weisbach equation to calculate the head loss due to friction for flow through pipes isapplicable when the flow through the pipe can be

Capillarity is due to

I. surface tension

II. cohesion

III. viscosity

IV. vapour pressure

V. weight density of liquid

Manometer is a device used for measuring