Electrical Engineering (EE) Exam  >  Electrical Engineering (EE) Tests  >  Technical Test SSC JE: Electrical Engineering (EE)- 14 - Electrical Engineering (EE) MCQ

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Electrical Engineering (EE) MCQ


Test Description

30 Questions MCQ Test - Technical Test SSC JE: Electrical Engineering (EE)- 14

Technical Test SSC JE: Electrical Engineering (EE)- 14 for Electrical Engineering (EE) 2024 is part of Electrical Engineering (EE) preparation. The Technical Test SSC JE: Electrical Engineering (EE)- 14 questions and answers have been prepared according to the Electrical Engineering (EE) exam syllabus.The Technical Test SSC JE: Electrical Engineering (EE)- 14 MCQs are made for Electrical Engineering (EE) 2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests for Technical Test SSC JE: Electrical Engineering (EE)- 14 below.
Solutions of Technical Test SSC JE: Electrical Engineering (EE)- 14 questions in English are available as part of our course for Electrical Engineering (EE) & Technical Test SSC JE: Electrical Engineering (EE)- 14 solutions in Hindi for Electrical Engineering (EE) course. Download more important topics, notes, lectures and mock test series for Electrical Engineering (EE) Exam by signing up for free. Attempt Technical Test SSC JE: Electrical Engineering (EE)- 14 | 100 questions in 100 minutes | Mock test for Electrical Engineering (EE) preparation | Free important questions MCQ to study for Electrical Engineering (EE) Exam | Download free PDF with solutions
Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 1

Resolution of an instrument is

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 2

The volt ampere equation for a long shunt compound motor is given by

1 Crore+ students have signed up on EduRev. Have you? Download the App
Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 3

The current through a series RLC circuit under resonance condition will be

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 4

Zero-sequence currents can flow from a line to transformer bank if the windings are in

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 5

Resistivity of wire depends on

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 6

In a transistor largest dimension is that of –

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 7

Which one of the following describes correctly the effect of adding a zero to the system ?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 8

For both lap and wave windings, there are as many commutator bars as the number of

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 9

A Lissajous pattern on an oscilloscope has 5 horizontal tangencies and 2 vertical tangencies.The frequency of the horizontal input is 1,000 Hz. What is the frequency of the vertical input ?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 10

Negative-sequence reactance of a transformer is
 

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 11

Current flow through a bipolar transistor is by means of –

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 12

Five resistances are connected as shown in fig.6.

The equivalent resistance between the point A and B will be

 

 

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 13

The smallest change in a measured variable to which an instrument will respond is

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 14

114.Which of the following bridges can be used for inductance measurement ?
1. Maxwell bridge     2. Hay's bridge
3. Wein bridge          4. Wheatstone bridge
Select the correct answer using the code given below:
 

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 15

What is the approximate input impedance of a CRO?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 16

Which of the following relation is incorrect ?

power factor =

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 17

Dead time of the instrument is

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 18

A FET can be used as a variable –

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 19

The power of a three-wire balanced system was measured by two wattmeter method. The reading of one of the wattmeter was found to be double that of the other. What is the pf of the system ?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 20

The field coils of a dc generator are usually made of

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 21

Torque/weight ratio of an instrument indicates

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 22

 ......... is the best electronic device for fast switching.

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 23

123. The characteristic equation of a feedback control system is given by :s3 + 6s2 + 9s + 4 = 0 is What is the number of roots in the left -half of the s-plane ?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 24

An alternating e.m.f. is applied to a pure inductance such that inductive reactance is 10 W.If the frequency of a.c. is doubled, the reactance will become

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 25

A series R-L-C circuit will have unity power factor if operated at a frequency of

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 26

The errors introduced by an instrument fall in which category ?

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 27

The current drawn by a 120 V dc motor with back emf of 110 V and armature resistance of 0.4W is

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 28

If the power factor is below 0.5 in two wattmeter method of power measurement

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 29

The positive-negative and zero sequence impedances of a solidly grounded system under steady-state condition always follow the relations

Technical Test SSC JE: Electrical Engineering (EE)- 14 - Question 30

The resistance temperature coefficient is defined as

View more questions
Information about Technical Test SSC JE: Electrical Engineering (EE)- 14 Page
In this test you can find the Exam questions for Technical Test SSC JE: Electrical Engineering (EE)- 14 solved & explained in the simplest way possible. Besides giving Questions and answers for Technical Test SSC JE: Electrical Engineering (EE)- 14, EduRev gives you an ample number of Online tests for practice

Top Courses for Electrical Engineering (EE)

Download as PDF

Top Courses for Electrical Engineering (EE)