Test: Control System- 1 - Electrical Engineering (EE) MCQ

The transfer function of a linear system is the

If the open-loop transfer function is a ratio of a numerator polynomial of degree 'm' and a denominator polynomial of degree 'n' then the integer (n-m) represents the number of

Despite the presence of negative feedback, control system still have problems of instability  because the

Consider the following statements in connection with the feedback of control systems:

1. Feedback can improve stability or be harmful to stability if it is not properly applied.

2. Feedback can always improve stability

.3. In many situations the feedback can reduce the effect of noise and disturbance on system performance.

4. In general the sensitivity of the system gain of a feedback system to a parameter variatio depends on, where the parameter is located.

Which of the above statements are correct ?

Consider the following statements:

1. The effect of feedback is to reduce the system error.

2. Feedback increases the gain of the system in one frequency range but decreases in another.

3. Feedback can cause a system that is originally stable to become unstable.

Which of these statements are correct ?

Consider the following statements:

Feedback in control system can be used

1. to reduce the sensitivity of the system to parameter variations and disturbances.

2. to change time constant of the system.

3. to increase loop gain of the system

Which of the statement given above are correct?

With negative feedback in a closed loop control system, the system sensitivity to parameter variations

In a control system, the use of negative feedback

The transfer function of a system is

The characteristic equation of the system is

Which one of the following identity is correct one?

The transfer function from d(s) to y(s) is

For what value of K, are the two block diagrams as shown below equivalent ?

In the signal flow graph of the figure is y/x equals

For the signal flow diagram shown in the given figure, the transmittance between x₂ and x₁ is

When a human being tries to approach an object, his brain acts as

Consider the loop transfer function

G(s)H(s) =

In the roots locus diagram the controid will be located at

Consider the following statements:

In root-locus plot, the breakaway points

1. Ned not always be on real axis alone

2. Must lie on the root loci

3. Must lie between 0 and – 1

Which of these statements are correct ?

For a unity negative feedback control system, the open loop transfer function is

The root-locus plot of the system is

First column elements of the Routh's tabulation are 3, 5 -3/4, 1/2, 2. It means that there

The response c(t) of a system is described by te differential equation

The system response is

The polar plot of a transfer function passes through the critical point (–1.0). The gain margin is

If the transfer function of a phase lead compensator is (s+ a)/ (s+b) and that of a lag compensator is (s + p)/(s+q), then Which one of the following sets of condition must be satisfied ?