Pipes And Cistern - MCQ 2 - Railways MCQ

If a pipe A can fill a tank 3 times faster than pipe B. If both the pipes can fill the tank in 42 minutes, then the slower pipe alone will be able to fill the tank in?

A large cistern can be filled by two pipes P and Q in 15 minutes and 10 minutes respectively. How many minutes will it take to fill the Cistern from an empty state if Q is used for half the time and P and Q fill it together for the other half?

A pipe can fill a cistern in 8 hours. After half the tank is filled, three more similar taps are opened. What is the total time taken to fill the cistern completely?

Two pipes P and Q are opened together to fill a tank. Both the pipes fill the tank in time “x” If Q separately took 16 minutes more time than “x” to fill the tank and Q took 36 minutes more time than “x” to fill the tank, then find out the value of x?

A Cistern has an inlet pipe and outlet pipe. The inlet pipe fills the cistern completely in 1 hour 20 minutes when the outlet pipe is plugged. The outlet pipe empties the tank completely in 6 hours when the inlet pipe is plugged. If there is a leakage also which is capable of draining out the water from the tank at half of the rate of the outlet pipe, then what is the time taken to fill the empty tank when both the pipes are opened?

A Cistern has an inlet pipe and outlet pipe. The inlet pipe fills the cistern completely in 1 hour 20 minutes when the outlet pipe is plugged. The outlet pipe empties the tank completely in 4 hours when the inlet pipe is plugged. If both pipes are opened simultaneously at a time when the tank was one-third filled, when will the tank fill thereafter?

Two pipes P and Q can fill a cistern in 10 hours and 20 hours respectively. If they are opened simultaneously. Sometimes later, tap Q was closed, then it takes total 8 hours to fill up the whole tank. After how many hours Q was closed?

Three pipes A, B, and C can fill the tank in 10 hours, 20 hours and 40 hours respectively. In the beginning all of them are opened simultaneously. After 2 hours, tap C is closed and A and B are kept running. After the 4th hour, tap B is also closed. The remaining work is done by tap A alone. What is the percentage of the work done by tap A alone?

A pipe can fill a tank in 12 minutes and another pipe can fill it in 15 minutes, but a third pipe can empty it in 6 minutes. The first two pipes are kept open for 5 min in the beginning and then third pipe is also opened. Time taken to empty the water tank is?

Two pipes A and B can fill a tank in 12 hours and 18 hours respectively. The pipes are opened simultaneously and it is found that due to leakage in the bottom of the tank it took 48 minutes excess time to fill the cistern. When the cistern is full, in what time will the leak empty it?

A tank is normally filled in 6 hours but takes two hours longer to fill because of a leak in the bottom of the tank. If the tank is full the leak will empty it in how many hours?

Twelve pipes are connected to a Cistern. Some of them are inlet pipes and the others are outlet pipes. Each of the inlet pipes can fill the tank in 8 hours and each of the outlet pipes can empty the cistern completely in 6 hours. If all the pipes are kept open, the empty tank gets filled in 24 hours. How many inlet pipes are there?

A dam has four inlets – A, B, C and D. The dam can be filled in 12 minutes through the first three inlets and it can be filled in 15 minutes through the second, the third and fourth inlet also it can be filled through the first and the fourth inlet in 20 minutes. How much time required to fill up the dam by all the four inlets?

Three pipes P, Q and R connected to a Cistern. The first pipe (i.e) P can fill 1/2 part of the tank in one hour, second pipe, Q can fill 1/3 part of the cistern in one hour. R is connected to empty the cistern. After opening all the three pipes 7/12 part of the cistern. Then how much time required to empty the cistern completely?

A Cistern can be filled by an inlet pipe at the rate of 4 litres per minute. A leak in the bottom of a cistern can empty the full tank in 8 hours. When the cistern is full, the inlet is opened and due to the leak, the cistern is empty in 40 hours. How many litres does the cistern hold?

In a tank there is a pipe which can be used for filling the tank as well as for emptying it. The capacity of the tank is 1200 m³. The emptying of the tank is 10 m³ per minute higher than its filling capacity and the pump needs 6 minutes lesser to empty the tank than it needs to fill it. What is the filling capacity of the pipe?

Two pipes P and Q can fill a cistern in 12 hours and 4 hours respectively. If they are opened on alternate hours and if pipe A is opened first, in how many hours will the tank be full?