Professional Logo Design - Adobe Illustrator cc(Circuit) Video Lecture | How to Design a Logo in Adobe Illustrator: For Beginners and Beyond

hey guys welcome back to the vague
statutory enough creative process and
today we're designing this circuit logo
the logo has got a very interesting
designing technique it has got a circuit
design with a circle that ended one side
where's the other side are converging
toward each other so design is logo
we'll use the ellipse tool and creative
circle then after that with the help of
line segment tool will create out the
grid we modify the shape of the grid and
with the help of shape village we will
clear out this circuit design and
finally we will add up the photo videos
and text so let's begin a tutorial
that's select the ellipse tool and
create a circle of height and weight
around 208 so left click the mouse
button and I'm keeping the width around
to 0-8 by height to 0-8 the reason why
I'm keeping this I will tell you a
little later
so once I've created that I'll change
the color to something are blue and
change the color to stroke color and
I'll keep the stroke thickness Terron
for points and like that now next thing
I'll use the scissor tool and cut it
into half so I'll use the Ceasar tool
and click here and click here and now
it's half I can delete the other half
next thing we need to do is we need to
create a division of 13 the reason why
we have taken too much 0-8 was to 0-8 I
have done is I have divided to 0-8 by 13
and I've got 16 points a height so I'll
create a rectangle and create a height
of 16 points leather with peony and
click ok so we got a rectangle of that
height now next thing I will do is I'll
use the line segment tool and just trace
it out from this with a chip rest of
straight line horizontal and with all
press duplicate this and bring it to
this much now with the help of
duplication option control D we'll
duplicate this for multiple number of
times and after that delete this
rectangle and bring this to this so so
I'll just aligned with this zoom it in
align this with this circle like that
and you can see it now I'll just delete
it out rest and we got a 13 division
each of 18 points and total was to 0-8
I'll just delete this out and next thing
I'll just select everything annexed and
is still this much now grab this ctrl G
ctrl c ctrl f to a duplicate to the
front and I just rotate this to 90
degree angle so with the ship pressed
I'll just rotate it through this much
now next thing is I'll just select both
ctrl G and next what I'll do is I'll
just bring this second line aligned with
the server so I'll just bring it this
much bring it to the center like that
let's check it out
okay that's good so next thing we need
to do is we need to modify the shape so
I'll just go there selecting this go to
object envelope the stoat make with mesh
and here I have given the rows 2 and
column 1 preview it you got c2 by 1 and
click OK and now with the direct
selection tool
I'll just modify the shape from here and
just push it the other side you can see
we have got that nice round effect and
after that a little bit after that we'll
just make sure the handle is made in a
flow while adjusting the handle we need
to make sure that these things should be
perfectly aligned right now I think see
okay it's not aligned so we need to make
sure it's aligned properly first so zoom
it in and make sure it's aligned so I'll
just make sure okay like that let me see
on the down done now next thing
selecting this go to
with the selection to do it selecting
that go to object amble up the store
make it mesh preview it to by one okay
now modify the shape with the direct
selection tool selected shift and just
click it to the side like that just a
little bit like that and then after that
we'll make sure the handle is in perfect
place so I'll just click and make sure
to maintain the flow in that time we
have to make sure that this is not
affected so we have to go there and
adjust that they should be in the flow
like that we can just reduce a little
bit okay like that in the same way
downside also we have to adjust the
handle so just hide this and you can see
it's good there but if you after doing
this you do have to do some adjustment
here you can see so I'll just select and
push it up a little bit and zoom it in a
little bit down and see it out okay
that's fine so once you get that with
the selection tool selected and go to
object expand it click OK and now done
now everything is fine select everything
and now expand it object expand and this
will convert this into fill object next
thing we need to do is we need to make
this circuit design so we have to first
remove all these stuff from here
maintaining that curve so with the shape
builder tool just go there first of all
select the dark color from here and just
walk out we have to maintain this curve
so we have to remove all these outside
ones so just click and drag and do it
select them
make sure they are combined just make
sure to combine them and all these small
small pieces should be combined so that
it doesn't create any stuff later on
working out with the small small pieces
will reduce the amount of error we can
make later on so just make sure to
remove all these corner pieces we are
not working here because we can delete
it by selecting them but here it is
attached to these this main design so we
have to make sure it's detached from
there so that's why we are using the
shape builder tool and removing it so
make sure they are combined and now we
are here at the end I'll just zoom it
out and make sure walk you from here so
selecting this make sure this one is
connected like this now next thing we
need to do is after this is we will walk
out with the interior circuit design so
first thing we need to create all these
stuff so let's see so this is the middle
one you can see this is one and after
that we got the East shape so this one
is we can see middle and after that here
so we have to create that shape from
here going through that like that and
over here leaving this okay here we got
two gap so make sure just click and drag
and you create that shape I'll just zoom
it in around one ad let's check it out
okay with you and it will just okay this
one is good now next thing is I'll just
make this gap so one two here like that
combining them you got a nice gap here
here we have to maintain till this end
Leah we need to extend the one two three
I two three and four you got this long
shape down here we got three
and okay this one we've got a gap here
three this one goes till this much
connecting this remind us then this will
go to this much this one go one two
three this one go here here here and
this ends here the same way we'll go for
this giving that long leaving one row
from completing from here this one goes
till one two three four I think and done
completing here I'll just make sure all
these are blue okay this one all these
blue all these should be removed later
on so I'm just giving them different
color using the tabular - so right it
doesn't create an issue later on next
here we need to work out with here so we
need a gap here so I just expand it and
tell this much and we got that nice gap
here in the same way we zoom it in I'll
just zoom it in here and just make sure
it is nicely are removed so like that
get this we need to small God you can
see if we left it out it will be
creating an issue so just zoom I didn't
remove it out with a shipbuilder to
submit it out like that just want this
piece okay here we go next thing we need
to do is we just go here and here we got
that shape this one we got a gap here we
need to make that free
by this than this and here is opening
here so we'll just go there and make it
open there selecting everything and Zuma
then walk it out make it clean so just
go there and just clean up everything
all the small small pages should be
combined this one and this and this like
that let's check out next stuff here so
this code the got there this one you got
that this one it goes till their opening
okay it here till here and this one all
combined together like that okay so we
got this and it has got an opening here
so I'll just click and drag it out and
here's the opening other one in the same
way we'll just check it out where else
because that this one goes there second
row is this so I'll just bring it out
from here let's check this one okay it
starts from here in the same way it
starts from here and it takes two rows
like that you can see it has gate taken
two rows so I just make sure it's
combined two rows like that
then next is this one third one so it
comes from here going through this and
ends at here so you can see that next we
are about to finish here so we'll just
go there and this and that and it's done
next is we need to give a gap here
connecting to this then although this
and giving that I think two gaps so two
here and finish it here this one should
be finished and let's break it over here
so you got that next here is we need to
maintain this flow we get an angle here
and then going till this much then from
here going till this much so let's check
it out
okay now almost everything is done let's
let's see what else we have left it out
you can see here we got a little space
here so you can remove it I think we
have done so after that click outside
ungroup everything ungroup ungroup now
selecting these pieces you can delete
these only the blue pieces and it will
be empty there selecting this just
delete it out this one this one this one
and this one and the small
controls that this one and we select and
delete all the corner pieces so just
click and drag and delete click and drag
and delete this one we need that opening
here okay we got a shoe here you can see
we have all that issue so I'll just use
the shipbuilder too and just remove this
too and delete it out like this so rest
I can just select and delete so go there
just click drag delete click drag the
later
done so if you see we have got
everything now let's adjust these things
before that what we'll do is we just
check out whether we have left or
anything where is there something which
we need to do at the adjustments okay I
think it's everything is fine so now
select everything and we'll do the
adjustments here like that so they have
a shape your jewel I'll just do is we
need to land here this much so from here
all we need a little bit of length from
here to this much and the rest of all
I'll just make sure to remove it I'll
just change the color to something else
so that we can see it from there till
this much the same way we got a long one
here so I think it's okay next is we
keep giving a little gap here and let's
extend this still this much this one a
little bit till this much and remove the
rest this one till this much remove the
rest for maybe two set from here rest
this one make it long this one around
this much this one okay this one okay
now next thing we need to do is just to
delete this outer I will just delete
this out with the selection tool just
select them delete delete delete delete
and delete and let's do some adjustments
here we need two little adjustments and
this so before that I'll just do is
select everything and go to Pathfinder
and combine it now this is one object
now after that we can do the adjustments
so I'll just remove a point from here
extra points like that and with the
Anchor Point tool I'll just make sure
it's go straight like that okay now this
one I need to make it linear so I'll
just select this and give some
anchor2 this like that and this one also
90-degree angle and after that just
bring it so this much like that now
let's check it out we it's perfect -
this one is perfect this one this one
this one we need to give a little longer
here so I'll just select and push it out
till this much the same way selecting
this I'll just with the arrow keys just
push it out so this much this one we
need to make it longer with a shift and
arrow just push it out longer in the
same way so like these shift with the
arrow key just extend it out this one
extend it a little bit okay this one is
going good so finally we have got the
circuit shape next thing we need to do
is we need to work out with the entire
details
so I'll just first of all what I'll do
is I'll just make sure to give that our
thickness so I'll just increase the
thickness here so give a stroke color
and let's check it out this one we can
just little bit increase it let's check
it out too and that's almost good we can
reduce a little bit one point six then
after that we'll just convert that
stroke into object form so I'll just go
to path and out banks - and after that
just combine it and this will give that
nice thick one next thing we need to do
is I'll just scoop this up Kentucky and
we have to create that semicircle
so I'll use the ellipse tool and left
click my mouse button and I give their
width and height and click OK give the
stroke color so just invert this color
and let's increase the stroke thickness
true then maybe four and check it out or
maybe that's increase it to six and okay
now that's a change to something else
like that great and like that now I'll
just place this according to this shape
like that you can see and a little bit
little bit and I'll just increase this
size
maintaining the shape like that and
after that I'll just give a cut with a
Caesar to guard out here one more card
here and let's delete the rest like that
I got that nice shape we can increase it
with a share press just click and just
increase this gapping like that next
thing is we need to create the circles
so I'll just use our ellipse and create
a circle and voda color and next I'll
just place it across the ends to just go
there please sit there same we just
click and drag and duplicate it and
place it at the ends this one I'll just
make sure it's on the end like that this
one go there just to pick it and place
it there and go there place it there so
if you place it at every end
and done next is we'll need to do some
adjustment here so first of all I'll
select everything and deselect this
circle outside one control G group it
and we need to convert this end so to do
that I'll go to object envelope distort
make it mesh let's preview it here we
need to give to here around like that
and click OK and now with the direct
selection tool just control it is so
just click let you press one to just one
one and maintain it flow like that from
here like that to select it
make sure follow the Oh and you see that
it has got a nice that curve here we can
do some adjustments here to give that
for you that
and done and after that selecting that
go to object expand it and it's done now
selecting everything I'll just scale it
down a little bit and place it here so
finally we have done with our socket
design last thing we left with there's
text so let's tie by the Dex CI RC UID
circuit and I'll just change the color
to white and if fun which are using here
is robert x GP so with optical just
select that and place it here we do some
adjustments here go to character that's
increase the spacing so let's increase
it around 1000 or maybe 1000 hundred
okay and place it there and let's do
some highlight i'll just choose the sea
and change the color to white
and done so finally we have completed
our logo I hope you enjoy tutorial going
to check out an extra come enough and if
you want more objects on designing you
can press the subscribe button thank you