Cybersecurity: Crash Course Computer Science #31 Video Lecture | Introduction to Computer Science: An Overview - Software Development

Hi, I’m Carrie Anne, and welcome to CrashCourse
Computer Science!
Over the last three episodes, we’ve talked
about how computers have become interconnected,
allowing us to communicate near-instantly
across the globe.
But, not everyone who uses these networks
is going to play by the rules, or have our
best interests at heart.
Just as how we have physical security like
locks, fences and police officers to minimize
crime in the real world, we need cybersecurity
to minimize crime and harm in the virtual
world.
Computers don’t have ethics.
Give them a formally specified problem and
they’ll happily pump out an answer at lightning
speed.
Running code that takes down a hospital’s
computer systems until a ransom is paid is
no different to a computer than code that
keeps a patient's heart beating.
Like the Force, computers can be pulled to
the light side or the dark side.
Cybersecurity is like the Jedi Order, trying
to bring peace and justice to the cyber-verse.
INTRO
The scope of cybersecurity evolves as fast
as the capabilities of computing, but we can
think of it as a set of techniques to protect
the secrecy, integrity and availability of
computer systems and data against threats.
Let’s unpack those three goals:
Secrecy, or confidentiality, means that only
authorized people should be able to access
or read specific computer systems and data.
Data breaches, where hackers reveal people’s
credit card information, is an attack on secrecy.
Integrity means that only authorized people
should have the ability to use or modify systems
and data.
Hackers who learn your password and send e-mails
masquerading as you, is an integrity attack.
And availability means that authorized people
should always have access to their systems
and data.
Think of Denial of Service Attacks, where
hackers overload a website with fake requests
to make it slow or unreachable for others.
That’s attacking the service’s availability.
To achieve these three general goals, security
experts start with a specification of who
your “enemy” is, at an abstract level,
called a threat model.
This profiles attackers: their capabilities,
goals, and probable means of attack – what’s
called, awesomely enough, an attack vector.
Threat models let you prepare against specific
threats, rather than being overwhelmed by
all the ways hackers could get to your systems
and data.
And there are many, many ways.
Let’s say you want to “secure” physical
access to your laptop.
Your threat model is a nosy roommate.
To preserve the secrecy, integrity and availability
of your laptop, you could keep it hidden in
your dirty laundry hamper.
But, if your threat model is a mischievous
younger sibling who knows your hiding spots,
then you’ll need to do more: maybe lock
it in a safe.
In other words, how a system is secured depends
heavily on who it’s being secured against.
Of course, threat models are typically a bit
more formally defined than just “nosy roommate”.
Often you’ll see threat models specified
in terms of technical capabilities.
For example, “someone who has physical access
to your laptop along with unlimited time”.
With a given threat model, security architects
need to come up with a solution that keeps
a system secure – as long as certain assumptions
are met, like no one reveals their password
to the attacker.
There are many methods for protecting computer
systems, networks and data.
A lot of security boils down to two questions: who are you, and what should you have access to?
Clearly, access should be given to the right
people, but refused to the wrong people.
Like, bank employees should be able to open
ATMs to restock them, but not me… because
I’d take it all... all of it!
That ceramic cat collection doesn’t buy
itself!
So, to differentiate between right and wrong
people, we use authentication - the process
by which a computer understands who it’s
interacting with.
Generally, there are three types, each with
their own pros and cons:
What you know.
What you have.
And what you are.
What you know authentication is based on knowledge
of a secret that should be known only by the
real user and the computer, for example, a
username and password.
This is the most widely used today because
it’s the easiest to implement.
But, it can be compromised if hackers guess
or otherwise come to know your secret.
Some passwords are easy for humans to figure
out, like 12356 or q-w-e-r-t-y.
But, there are also ones that are easy for
computers.
Consider the PIN: 2580.
This seems pretty difficult to guess – and
it is – for a human.
But there are only ten thousand possible combinations
of 4-digit PINs.
A computer can try entering 0000, then try
0001, and then 0002, all the way up to 9999...
in a fraction of a second.
This is called a brute force attack, because
it just tries everything.
There’s nothing clever to the algorithm.
Some computer systems lock you out, or have
you wait a little, after say three wrong attempts.
That’s a common and reasonable strategy,
and it does make it harder for less sophisticated
attackers.
But think about what happens if hackers have
already taken over tens of thousands of computers,
forming a botnet.
Using all these computers, the same pin – 2580
– can be tried on many tens of thousands
of bank accounts simultaneously.
Even with just a single attempt per account,
they’ll very likely get into one or more
that just happen to use that PIN.
In fact, we’ve probably guessed the pin
of someone watching this video!
Increasing the length of PINs and passwords
can help, but even 8 digit PINs are pretty
easily cracked.
This is why so many websites now require you
to use a mix of upper and lowercase letters,
special symbols, and so on – it explodes
the number of possible password combinations.
An 8-digit numerical PIN only has a hundred
million combinations – computers eat that
for breakfast!
But an 8-character password with all those
funky things mixed in has more than 600 trillion
combinations.
Of course, these passwords are hard for us
mere humans to remember, so a better approach
is for websites to let us pick something more
memorable, like three words joined together:
“green brothers rock” or “pizza tasty
yum”.
English has around 100,000 words in use, so
putting three together would give you roughly
1 quadrillion possible passwords. Good luck trying to guess that!
I should also note here that using non-dictionary
words is even better against more sophisticated
kinds of attacks, but we don’t have time
to get into that here.
Computerphile has a great video on choosing
a password - link in the dooblydoo.
What you have authentication, on the other
hand, is based on possession of a secret token
that only the real user has.
An example is a physical key and lock.
You can only unlock the door if you have the
key.
This escapes this problem of being “guessable”.
And they typically require physical presence,
so it’s much harder for remote attackers
to gain access.
Someone in another country can’t gain access
to your front door in Florida without getting
to Florida first.
But, what you have authentication can be compromised
if an attacker is physically close.
Keys can be copied, smartphones stolen, and
locks picked.
Finally, what you are authentication is based
on... you!
You authenticate by presenting yourself to
the computer.
Biometric authenticators, like fingerprint
readers and iris scanners are classic examples.
These can be very secure, but the best technologies
are still quite expensive.
Furthermore, data from sensors varies over
time.
What you know and what you have authentication
have the nice property of being deterministic
– either correct or incorrect.
If you know the secret, or have the key, you’re
granted access 100% of the time.
If you don’t, you get access zero percent
of the time.
Biometric authentication, however, is probabilistic.There’s some chance the system won’t recognize you…
maybe you’re wearing a hat or the lighting
is bad.
Worse, there’s some chance the system will
recognize the wrong person as you – like
your evil twin!
Of course, in production systems, these chances
are low, but not zero.
Another issue with biometric authentication
is it can’t be reset.
You only have so many fingers, so what happens if an attacker compromises your fingerprint data?
This could be a big problem for life.
And, recently, researchers showed it’s possible
to forge your iris just by capturing a photo
of you, so that’s not promising either.
Basically, all forms of authentication have
strengths and weaknesses, and all can be compromised
in one way or another.
So, security experts suggest using two or
more forms of authentication for important
accounts.
This is known as two-factor or multi-factor
authentication.
An attacker may be able to guess your password
or steal your phone: but it’s much harder
to do both.
After authentication comes Access Control.
Once a system knows who you are, it needs
to know what you should be able to access,
and for that there’s a specification of
who should be able to see, modify and use what.
This is done through Permissions or Access
Control Lists (ACL), which describe what access
each user has for every file, folder and program
on a computer.
“Read” permission allows a user to see
the contents of a file, “write” permission
allows a user to modify the contents, and
“execute” permission allows a user to
run a file, like a program.
For organizations with users at different
levels of access privilege – like a spy
agency – it’s especially important for
Access Control Lists to be configured correctly
to ensure secrecy, integrity and availability.
Let’s say we have three levels of access:
public, secret and top secret.
The first general rule of thumb is that people
shouldn’t be able to “read up”.
If a user is only cleared to read secret files,
they shouldn’t be able to read top secret
files, but should be able to access secret
and public ones.
The second general rule of thumb is that people
shouldn’t be able to “write down”.
If a member has top secret clearance, then
they should be able to write or modify top
secret files, but not secret or public files.
It may seem weird that even with the highest clearance, you can’t modify less secret files.
But, it guarantees that there’s no accidental
leakage of top secret information into secret
or public files.
This “no read up, no write down” approach
is called the Bell-LaPadula model.
It was formulated for the U.S. Department
of Defense’s Multi-Level Security policy.
There are many other models for access control
– like the Chinese Wall model and Biba model.
Which model is best depends on your use-case.
Authentication and access control help a computer
determine who you are and what you should
access, but depend on being able to trust
the hardware and software that run the authentication
and access control programs.
That’s a big dependence.
If an attacker installs malicious software
– called malware – compromising the host
computer’s operating system, how can we
be sure security programs don’t have a backdoor
that let attackers in?
The short answer is… we can’t.
We still have no way to guarantee the security
of a program or computing system.
That’s because even while security software
might be “secure” in theory, implementation
bugs can still result in vulnerabilities.
But, we do have techniques to reduce the likelihood
of bugs, quickly find and patch bugs when
they do occur, and mitigate damage when a
program is compromised.
Most security errors come from implementation
error.
To reduce implementation error, reduce implementation.
One of the holy grails of system level security
is a “security kernel” or a “trusted
computing base”: a minimal set of operating system software that’s close to provably secure.
A challenge in constructing these security
kernels is deciding what should go into it.
Remember, the less code, the better!
Even after minimizing code bloat, it would
be great to “guarantee” that code as written
is secure.
Formally verifying the security of code is
an active area of research.
The best we have right now is a process called
Independent Verification and Validation.
This works by having code audited by a crowd
of security-minded developers.
This is why security code is almost always
open-sourced.
It’s often difficult for people who wrote
the original code to find bugs, but external
developers, with fresh eyes and different
expertise, can spot problems.
There are also conferences where like-minded
hackers and security experts can mingle and
share ideas, the biggest of which is DEF CON,
held annually in Las Vegas.
Finally, even after reducing code and auditing
it, clever attackers are bound to find tricks
that let them in.
With this in mind, good developers should
take the approach that, not if, but when their
programs are compromised, the damage should
be limited and contained, and not let it compromise
other things running on the computer.
This principle is called isolation.
To achieve isolation, we can “sandbox”
applications.
This is like placing an angry kid in a sandbox;
when the kid goes ballistic, they only destroy
the sandcastle in their own box, but other
kids in the playground continue having fun.
Operating Systems attempt to sandbox applications
by giving each their own block of memory that
others programs can’t touch.
It’s also possible for a single computer
to run multiple Virtual Machines, essentially
simulated computers, that each live in their
own sandbox.
If a program goes awry, worst case is that
it crashes or compromises only the virtual
machine on which it’s running.
All other Virtual Machines running on the
computer are isolated and unaffected.
Ok, that’s a broad overview of some key
computer security topics.
And I didn’t even get to network security,
like firewalls.
Next episode, we’ll discuss some specific
example methods hackers use to get into computer
systems.
After that, we’ll touch on encryption.
Until then, make your passwords stronger,
turn on 2-factor authentication, and NEVER
click links in unsolicited emails!
I’ll see you next week.