SolidWorks 2014 Tutorial 2: Ur 1st sketch; planes; start sketch; relations Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

tutorial number two in this tutorial we
will start our first sketch so this is
the first tutorial we're going to start
working with sudo doors we sit to the
left you have the part tree and the most
important things to look at right now
are the plants so you have three
different planes and you have the origin
so if you remember in the mathematics
you have the origin of the coordinates
of zero zero zero front plane you can
imagine it like a zip x coordinate to
play in the XY and so on so these are
the views or the planes where you are
able to start your sketching so
depending on the orientation of your
parts or how you want it you can select
the plane new one so once you choose
your plane and click on it you will see
this sketch so that means you are able
to insert a sketch on that plane so
let's click on it now we are able to
make a sketching so the sketch menu here
is activated you go to it so you have
the sketch tools so it is starting from
line the simplest tool the corner so on
so we're going to have a look on these
sketch tools in the next tutorials so
now let's start with the line and let's
start from the origin so Sir George is
user-friendly so it give you marking to
you I'm helping to choose your points
and if you look at the bottom you will
see the coordinates few points of you
put it on the origin you will get a 0 0
or coordinates so now you can see your
coordinates here so let's start from the
origin and now you can see the length of
your line so that is Latin for tool so
you know the approximate length instead
of making small lines or bigger lines
and then three-dimension them that might
miss your sketch so you can pick it to
be for example 100 millimeter then when
you click use selecting your point you
are still able to use the line tool so
when you are done you can click escape
or right-click select the pin your line
to the other thing to use with the line
let's lick the line take the point where
we want and if you notice this yellow
creation appears to you that means this
line is vertical so when you are drawing
you have some relation as well for
example now if you over over this line
you are able to select the middle point
and you see the relation appeared next
to that till you that is is a middle
point so we can pick it so now we know
there's variations so if you make it
like this you have this relation it is
perpendicular to that line so they are
very helpful tool to to help you
sketching and accurate in an accurate
way so if you want to show the relations
on your sketch you sit on the glasses
here you have the
view sketch relations when you selected
so you will see the relations in your
sketch so you have the midpoints here
how the perpendicular relation and
intersection here so if you want to
delete before deleting a relation if you
want to pick that point try to move it
so you are able to move the whole part
so like this continue to be in the
middle so let's click this point
right-click delete or simply click press
Delete on the keyboard so you deleted
that relation and if you pick that line
so you are able to move it freely from
that line so the relations playing an
important role in your sketching so
sometimes you need to see for the
relation if you are not able to correct
some or move some lines or so on so now
this return that duration put it so we
made it again here
so let's hide the relation again so in
the next tutorial we going to continue
talking about de sketching how to use
the line in another way and adding the
dimensions so see you in the next Orion