IT & Software Exam > IT & Software Videos > SolidWorks: Essential Training (All Commands included) > SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body
SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
FAQs on SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture - SolidWorks: Essential Training (All Commands included) - IT & Software
| 1. What is the purpose of the Extrude Cut feature in SolidWorks 2014? |  |
Ans. The Extrude Cut feature in SolidWorks 2014 allows users to remove material from a part by extruding a sketch in a specified direction. It is often used to create holes, slots, or other cutouts in a solid model.
| 2. How do I insert a sketch in SolidWorks 2014? | |
Ans. To insert a sketch in SolidWorks 2014, follow these steps:
1. Open the part or assembly file.
2. Click on the "Sketch" tab in the Command Manager.
3. Choose a plane or face where you want to insert the sketch.
4. Click on the "Sketch" button to start a new sketch.
5. Use the sketch tools to draw the desired geometry.
6. Click on the "Exit Sketch" button to finish the sketch.
| 3. What does the Convert tool do in SolidWorks 2014? | |
Ans. The Convert tool in SolidWorks 2014 allows users to convert existing entities in a sketch into different types of sketch geometry. It is commonly used to convert edges or curves into construction lines, or to convert sketch entities into blocks for reuse in other sketches.
| 4. How can I select a specific body in SolidWorks 2014? | |
Ans. To select a specific body in SolidWorks 2014, follow these steps:
1. Click on the "Select" tool in the Command Manager.
2. Choose the "Select Bodies" option from the drop-down menu.
3. Click on the body you want to select in the graphics area.
4. If there are multiple bodies overlapping, you can use the "Tab" key to cycle through the selection options until the desired body is selected.
| 5. Can I perform an Extrude Cut on multiple bodies simultaneously in SolidWorks 2014? | |
Ans. No, in SolidWorks 2014, the Extrude Cut feature can only be applied to one body at a time. If you want to perform an Extrude Cut on multiple bodies, you will need to repeat the process for each individual body separately.
Text Transcript from Video
2:27 extrude cut we have these sports
created in the previous tutorials and we
read also tutorial how to change the
colors inserting new sketches as you see
also I've been done in the previous
tutorial so if you didn't catch these
ideas can review the previous tutorial
and now in this tutorial we're going to
talk about the extrude cut we will keep
the revolve post in the next tutorial so
we use the extrude cut because it have
the same more like extrude and if you
are familiar with the inventor the
inventor making only one option for
extrusion and cutting so they are all
not the same walk but in this extrude
cut it is removing material so let's
activate the extrude cut because that
sketch was selected before so now it's
created a cut in that part so the same
we have the midplane cut the same
extruding feature so let's try to make
through or so it's going to cut through
all your body and if you make a blend
you are able to make a distance if you
make it distance inside click ok so you
have that cut let's see it again
select it a depth feature let's select
this time pop the next it will be the
same work as through all so if you make
up the next the next will be that edge
you have a preview here and let's make
up the vertex you can select the vertex
so you will see
this click okay so you'll notice how
that cut looks like we did it and let's
try to make up to surface so we have
this surface now you are shooting to
that surface for cutting up the body if
you have another body in the front of it
you can select that body to make that
cut so in this case I'm going to make it
up to next okay we have this extruded
cut so now let's select that sketch from
here then go to extrude cut and let's
try to make same we did in the rule here
can make an angle for drafting you see
how is your cut looks like and here the
one is in the direction tool if you want
to cut in second direction but in this
case will not work because we don't have
another side so it's just uncheck
direction too and the thin feature you
are making a cut like only and offset
surface so here is the distance you can
make it a thickness of 5 millimeter and
I think two direction or mid plane to
direction but in this case we will use
one direction because we have only one
bearish for nothing now let's activate
the crop to be able to see pick up here
please okay now notice how you cut it in
the part this edit the feature is the
activate the clean feature not let's
make it 10 put through of you couldn't
be able to edit the cut because of some
closed feature can read practically
bleep yes but you still have your sketch
there extrude cut and let's see D
selected control the same idea like int
extrusion you have this contour you can
select here and you have all the bodies
or selected bodies for example if you
have different bodies so you can cut
through one body not all the bodies so
we will try to cover this example now
let's just make that cut this is if the
surface on that part as we learn search
now let's use the convert entities we
had a tutorial in the previous tutorials
how to use the interior to convert and
now it is a december to not convert the
surface that profile so now we converted
that circuit and to profile now you are
able to eat soon let's extrude it and
here have be merged result so this is
another thing we didn't cover but now it
is shown because you have different
bodies so if you select emerge
it will consider all depart as one body
so this is now keep it where Sh
okay here notice you have three bodies
this one second one third third one but
this is the future here and uncheck the
other one so you have now so the doors
consider that as rated bodies and now
you have seen four different bodies so
let's insert a sketch on that surface
let's make a circle okay let's go to
extrude cut and we said we want to show
you the selected bodies the all bodies
or selected bodies so now let's make it
through all selected bodies and uncheck
that one here you can select so
canceling that body okay so you will
notice the cut only in that body not all
of the bodies so I hope now you
understand more about extrude cut and
extrusion and the other options in there
created in the previous tutorials and we
read also tutorial how to change the
colors inserting new sketches as you see
also I've been done in the previous
tutorial so if you didn't catch these
ideas can review the previous tutorial
and now in this tutorial we're going to
talk about the extrude cut we will keep
the revolve post in the next tutorial so
we use the extrude cut because it have
the same more like extrude and if you
are familiar with the inventor the
inventor making only one option for
extrusion and cutting so they are all
not the same walk but in this extrude
cut it is removing material so let's
activate the extrude cut because that
sketch was selected before so now it's
created a cut in that part so the same
we have the midplane cut the same
extruding feature so let's try to make
through or so it's going to cut through
all your body and if you make a blend
you are able to make a distance if you
make it distance inside click ok so you
have that cut let's see it again
select it a depth feature let's select
this time pop the next it will be the
same work as through all so if you make
up the next the next will be that edge
you have a preview here and let's make
up the vertex you can select the vertex
so you will see
this click okay so you'll notice how
that cut looks like we did it and let's
try to make up to surface so we have
this surface now you are shooting to
that surface for cutting up the body if
you have another body in the front of it
you can select that body to make that
cut so in this case I'm going to make it
up to next okay we have this extruded
cut so now let's select that sketch from
here then go to extrude cut and let's
try to make same we did in the rule here
can make an angle for drafting you see
how is your cut looks like and here the
one is in the direction tool if you want
to cut in second direction but in this
case will not work because we don't have
another side so it's just uncheck
direction too and the thin feature you
are making a cut like only and offset
surface so here is the distance you can
make it a thickness of 5 millimeter and
I think two direction or mid plane to
direction but in this case we will use
one direction because we have only one
bearish for nothing now let's activate
the crop to be able to see pick up here
please okay now notice how you cut it in
the part this edit the feature is the
activate the clean feature not let's
make it 10 put through of you couldn't
be able to edit the cut because of some
closed feature can read practically
bleep yes but you still have your sketch
there extrude cut and let's see D
selected control the same idea like int
extrusion you have this contour you can
select here and you have all the bodies
or selected bodies for example if you
have different bodies so you can cut
through one body not all the bodies so
we will try to cover this example now
let's just make that cut this is if the
surface on that part as we learn search
now let's use the convert entities we
had a tutorial in the previous tutorials
how to use the interior to convert and
now it is a december to not convert the
surface that profile so now we converted
that circuit and to profile now you are
able to eat soon let's extrude it and
here have be merged result so this is
another thing we didn't cover but now it
is shown because you have different
bodies so if you select emerge
it will consider all depart as one body
so this is now keep it where Sh
okay here notice you have three bodies
this one second one third third one but
this is the future here and uncheck the
other one so you have now so the doors
consider that as rated bodies and now
you have seen four different bodies so
let's insert a sketch on that surface
let's make a circle okay let's go to
extrude cut and we said we want to show
you the selected bodies the all bodies
or selected bodies so now let's make it
through all selected bodies and uncheck
that one here you can select so
canceling that body okay so you will
notice the cut only in that body not all
of the bodies so I hope now you
understand more about extrude cut and
extrusion and the other options in there
About this Video
4.73/5
Rating
Oct 03, 2025
Last updated
Related Exams
Video Description: SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body for IT & Software 2025 is part of SolidWorks: Essential Training (All Commands included) preparation.
The notes and questions for SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body have been prepared according to the IT & Software exam syllabus.
Information about SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body covers all important topics for IT & Software 2025 Exam.
Find important definitions, questions, notes, meanings, examples, exercises and tests below for SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body.
Introduction of SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body in English is available as part of our SolidWorks: Essential Training (All Commands included) for IT & Software & SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body in
Hindi for SolidWorks: Essential Training (All Commands included) course. Download more important topics related with notes, lectures and mock test series for
IT & Software Exam by signing up for free.
Description
Video Lecture & Questions for SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software - IT & Software full syllabus preparation | Free video for IT & Software exam to prepare for SolidWorks: Essential Training (All Commands included).
Information about SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body
Here you can find the meaning of SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body defined & explained in the simplest way possible.
Besides explaining types of SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body theory, EduRev gives you an ample number of questions to practice SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body tests,
examples and also practice IT & Software tests.
Related Searches
Summary
,mock tests for examination
,Previous Year Questions with Solutions
,SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Exam
,Sample Paper
,Extra Questions
,practice quizzes
,shortcuts and tricks
,Objective type Questions
,SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,study material
,Free
,Important questions
,video lectures
,MCQs
,ppt
,past year papers
,Semester Notes
,Viva Questions
;
Study SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body on the App
Students of IT & Software can study SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of SolidWorks 2014 Tutorial 27: Extrude Cut; insert sketch; convert; select body is prepared as per the latest IT & Software syllabus.
|
© EduRev
|
Education Revolution
|
|
Signup on EduRev and stay on top of your study goals
10M+ students crushing their study goals daily