SolidWorks 2014 Tutorial 28: Revolve Boss; using and examples Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

this is where we're going to talk about
the Raval boss feature in the features
menu we have these sketches from
previous tutorial now let's show you how
that the meaning of report slow
revolving is doable a sketch around an
axis so let's select that sketch Raval
now you have the selected control either
we can revolve all these sketches or one
of them so let's select the axis of
revolving acidic tab axis so you have
all the sketches or revolving around the
axis click OK and now we have a rebuilt
arrow so let's now try to fix it
with making selected controls so you
have to be a logical type of revolving
so now we're evolved that part but
select controls you learned about it in
the extrusion we then not use the idiot
control so okay so the revolving is
working so you have to think about the
type of sketch you are going to revolve
so let's make control see and activate
the wall select sketch and this time use
this axis so
now let's try click okay so this time
the revolving all this kitchen is
working because it has no zero thickness
inside the material so you have to think
about which type of sketching or working
a motion type where not work so now you
have this sketch they are solid parts
and you can make like pipes this idiot
is not contented about the wall here you
have the selected controls or we don't
have the pin feature activated so let's
make control Z to undo slick the sketch
the wall your wall or on that axis you
know thin feature we already talked
about the meaning of feature 10 future
let's make tween or 3 millimeters so we
have this kind of pipes so now let's try
to make an angle here 270 okay so we
have an error
let's try to build again hold
select and feature as you notice it did
implore with the center rectangular
because that will generate as the zero
thickness feature so we can fix it with
sleeping contours take that control and
that control that it let's make an angle
of 200 gray okay
so this is an important issue in
sidewalks to be able to understand the
logic behind your shape and what what
are not critical to be done and creating
errors so so now sick okay so we have
these pipes created by your call boss