IT & Software Exam > IT & Software Videos > SolidWorks: Essential Training (All Commands included) > SolidWorks 2014 Tutorial 32: Changing work order; more about loft
SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
FAQs on SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture - SolidWorks: Essential Training (All Commands included) - IT & Software
| 1. How do I change the work order in SolidWorks 2014? |  |
Ans. To change the work order in SolidWorks 2014, follow these steps:
1. Open your SolidWorks assembly or drawing file.
2. Go to the FeatureManager Design Tree on the left side of the screen.
3. Right-click on the feature that you want to move and select "Move Up" or "Move Down" from the context menu.
4. Repeat this process for each feature until you have the desired work order.
| 2. What is lofting in SolidWorks 2014? | |
Ans. Lofting in SolidWorks 2014 is a feature that allows you to create complex shapes by blending two or more profiles. It is commonly used to create smooth transitions between different sections of a part or assembly. To create a loft in SolidWorks 2014, you need to select two or more sketch profiles and specify how they should be connected. The loft feature then creates a smooth surface or solid between the selected profiles.
| 3. Can I change the loft settings after creating a loft in SolidWorks 2014? | |
Ans. Yes, you can change the loft settings after creating a loft in SolidWorks 2014. To do this, follow these steps:
1. Right-click on the loft feature in the FeatureManager Design Tree.
2. Select "Edit Feature" from the context menu.
3. In the PropertyManager window that appears, you can modify various settings such as the loft type, guide curves, and section profiles.
4. Make the desired changes and click "OK" to update the loft.
| 4. How can I ensure a smooth loft in SolidWorks 2014? | |
Ans. To ensure a smooth loft in SolidWorks 2014, consider the following tips:
1. Use sketches with similar shapes and dimensions for the loft profiles.
2. Add guide curves to control the shape of the loft. These curves can help guide the loft surface and ensure a smoother transition.
3. Avoid sharp changes in direction or sudden changes in profile size within the loft.
4. Check the continuity options in the loft settings to ensure the desired smoothness. For example, you can select "Tangent" or "Curvature" as the continuity type.
| 5. Can I edit the position or shape of individual loft sections in SolidWorks 2014? | |
Ans. Yes, you can edit the position or shape of individual loft sections in SolidWorks 2014. To do this, follow these steps:
1. Right-click on the loft feature in the FeatureManager Design Tree.
2. Select "Edit Feature" from the context menu.
3. In the PropertyManager window, you can select specific sections of the loft and modify their position, shape, or orientation using sketch tools or by dragging control points.
4. Make the desired changes and click "OK" to update the loft.
Text Transcript from Video
this that are going to show you a trick
in changing order of your war or feature
so everything you create any SolidWorks
is arranged in orders for example we
inserted these plans so we have these
planes here and then we walk the law so
the law is after the pins and if you
cannot for example start the loft with
our des plaines so the law is coming
after the planes but now let's try to
make another example for the loft and
showing you as well the order of working
so we want to make a profile to be
lifted not on a parallel plane to these
planes so let's make find top layer and
insert a plane reference to that plane
so you can make this is 170 put it below
behavior we created now let's insert a
sketch on the plane normal to and let's
make a circle here so have to be rich
captain you're not make answer here here
so that can be difficult for the loft
make that so let's make it here circular
except same sketch so we have a profile
here so notice we insert the plane sex
then insert a sketch so there is an
order for your so let's edit the loft
here edit feature in the profiles is d
created profile but if you look here you
can't find that profile so it is
if you even expand this tree you are not
able to see like these this sketch
because the order is not in the right
way because we created that sketch after
that law so logically that loft will not
see that plane so in this case we can
show you this trick to pull to drag
these features to be before the law so
you do that select the feature you want
and notice you are able to place it
before the law or in any place so when
you are working with this type of
changing order sometimes we will not
work due to some relations and
complicated figures and so on but this
case this radhika will be working
because there is nothing can prevent
change that order so now we have the
plane six sketch order it before the
loss so it's it it dead love it feature
so now you are seeing profile so let's
select it or so
the rest of the profiles changing the
point that it will work you're done okay
so here we have this stuff depart so in
this tutorial we learn how to change the
order in order to make some new feature
to work and a love thing you can also
load a profile is not considered to be
part to list of the profiles
in changing order of your war or feature
so everything you create any SolidWorks
is arranged in orders for example we
inserted these plans so we have these
planes here and then we walk the law so
the law is after the pins and if you
cannot for example start the loft with
our des plaines so the law is coming
after the planes but now let's try to
make another example for the loft and
showing you as well the order of working
so we want to make a profile to be
lifted not on a parallel plane to these
planes so let's make find top layer and
insert a plane reference to that plane
so you can make this is 170 put it below
behavior we created now let's insert a
sketch on the plane normal to and let's
make a circle here so have to be rich
captain you're not make answer here here
so that can be difficult for the loft
make that so let's make it here circular
except same sketch so we have a profile
here so notice we insert the plane sex
then insert a sketch so there is an
order for your so let's edit the loft
here edit feature in the profiles is d
created profile but if you look here you
can't find that profile so it is
if you even expand this tree you are not
able to see like these this sketch
because the order is not in the right
way because we created that sketch after
that law so logically that loft will not
see that plane so in this case we can
show you this trick to pull to drag
these features to be before the law so
you do that select the feature you want
and notice you are able to place it
before the law or in any place so when
you are working with this type of
changing order sometimes we will not
work due to some relations and
complicated figures and so on but this
case this radhika will be working
because there is nothing can prevent
change that order so now we have the
plane six sketch order it before the
loss so it's it it dead love it feature
so now you are seeing profile so let's
select it or so
the rest of the profiles changing the
point that it will work you're done okay
so here we have this stuff depart so in
this tutorial we learn how to change the
order in order to make some new feature
to work and a love thing you can also
load a profile is not considered to be
part to list of the profiles
Related Exams
About this Video
|
4.68/5 Rating |
|
Oct 24, 2024 Last updated |
Video Description: SolidWorks 2014 Tutorial 32: Changing work order; more about loft for IT & Software 2024 is part of SolidWorks: Essential Training (All Commands included) preparation.
The notes and questions for SolidWorks 2014 Tutorial 32: Changing work order; more about loft have been prepared according to the IT & Software exam syllabus.
Information about SolidWorks 2014 Tutorial 32: Changing work order; more about loft covers all important topics for IT & Software 2024 Exam.
Find important definitions, questions, notes, meanings, examples, exercises and tests below for SolidWorks 2014 Tutorial 32: Changing work order; more about loft.
Introduction of SolidWorks 2014 Tutorial 32: Changing work order; more about loft in English is available as part of our SolidWorks: Essential Training (All Commands included) for IT & Software & SolidWorks 2014 Tutorial 32: Changing work order; more about loft in
Hindi for SolidWorks: Essential Training (All Commands included) course. Download more important topics related with notes, lectures and mock test series for
IT & Software Exam by signing up for free.
Description
Video Lecture & Questions for SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software - IT & Software full syllabus preparation | Free video for IT & Software exam to prepare for SolidWorks: Essential Training (All Commands included).
Information about SolidWorks 2014 Tutorial 32: Changing work order; more about loft
Here you can find the meaning of SolidWorks 2014 Tutorial 32: Changing work order; more about loft defined & explained in the simplest way possible.
Besides explaining types of SolidWorks 2014 Tutorial 32: Changing work order; more about loft theory, EduRev gives you an ample number of questions to practice SolidWorks 2014 Tutorial 32: Changing work order; more about loft tests,
examples and also practice IT & Software tests.
|
Explore Courses for IT & Software exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
shortcuts and tricks
,MCQs
,Free
,mock tests for examination
,ppt
,Summary
,video lectures
,Sample Paper
,past year papers
,Important questions
,Viva Questions
,practice quizzes
,SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,study material
,SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Semester Notes
,SolidWorks 2014 Tutorial 32: Changing work order; more about loft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Objective type Questions
,Extra Questions
,Exam
,Previous Year Questions with Solutions
;
Study SolidWorks 2014 Tutorial 32: Changing work order; more about loft on the App
Students of IT & Software can study SolidWorks 2014 Tutorial 32: Changing work order; more about loft alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the SolidWorks 2014 Tutorial 32: Changing work order; more about loft,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of SolidWorks 2014 Tutorial 32: Changing work order; more about loft is prepared as per the latest IT & Software syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup