SolidWorks 2014 Tutorial 44 Chamfer types and using Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

hello the new tutorial and so it works
2014 let's start a new heart okay and
let's create any sketch let's make a
block extrude it ok so we have this
block this tutor are we going to talk
about the chamfer if you expand the
filleted menu you have the chapter so
when we are talking about the chamfer
you have to remember three types of
chamfer you have angular distance
distance distance and vertex so I think
a distance you have specified the
distance and the angle so let's put here
30 degree and choose that edge so here
you will notice the distance here is 10
and this angle is 30 degree change it to
60 so you will change the degree angle
to 60 and that distance is 10 so here is
the first type of champers we are able
to make an angular distance this is go
to the next type we have distance
distance so it is almost the same
results give you but here you are using
the distance set of using the angle if
you simply this one you made here are
five to ten distance and that means you
have an angle of thirty degree if you
remember in math so this is if you want
to make this distance make it 15
here so you see here you have that
distance horizontal distance is 15 and
the vertical is 5
okay let's try to make the next type of
sharper we have the vertex so in the
vertex you have to specify three
distances let's make the first distance
5 10 15 and select that vertex
you see you created that chapter in that
corner these 3 different values and now
let's try to fill it or to chamfer the
whole case this make a distance the
distance 5 to 5 and select that face so
you notice you are able to select one
edge cut the whole twist so now let's
try that flips click OK you not able to
chamfer face as the case affiliate that
means you need to let edge by edge