SolidWorks 2014 Tutorial 54: Parting Line Draft Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

in this tutorial we talk about the next
type of drop the parching line so we
have this drop from previous journalist
deleted yes
now let's activate graph the second
thought is the parting line so if you
understand the idea of the neutral
player which we have that metal plate
and this truck plane that would be the
part in line which is breathing with the
plane should either to sleep neutral
plane or parting line and then you'll be
able to select that direction of the
pole okay
you can select that parting line can
select the line so here you are going to
create a draft of ten degree if you
click inside if you click OK you will
get that inside so let's edit it and
this reverse this drafting click OK so
we created that outside at one drop
let's try it again
draft so the pulling direction that is
the line which is going to change in the
angle the parting line which is going to
be the if you imagine the hinge so that
will be the axial of the hinge where
this face contorted or that line going
to rotate so parching line let's select
this move that space outward so this is
the de Lyonne of the hinge or of the
door axiom to imagine that has a door so
select this as watching line
the direction of the whole imagine that
will be moved outward so this slide
going to move that direction ten degrees
so polling line you will see and here is
the direction let's make a degree okay
you make a 330 degree inside truck to
change direction click on that you make
outward outside so here you have the
parting line idea for creating drafts