SolidWorks 2014 Surface Tutorial 67: Extruded Surface and drafting Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

in this story got people talk about
extruded surface in details so here we
have this spline extruded from previous
tutorial we want to edit the surface
simply like before you can click on that
feature edit feature and then you are
able to dimension so it's not 20 exactly
the same motion like the 3d all the
features extrude now you have 20 here
you can increase thirdly so on you want
to reverse the direction here you can
reverse direction and you have some
option up the vertex of the plane or so
mean new from previous examples that if
we have a second body in the front that
we can exclude that surface as the
reference either a vertex surface
whatever but here you can choose the mid
plane we are able to extrude in both
sides so let's make a blend now here you
have direction too so you can extrude it
to direction to the front distances so
we have 30 we can add 50 but if you
choose the mid plane you will get 50 in
both sides or thirty hundred warned both
sides now let's go to the trap you are
also able to me to draw in the surface a
30 degree draft so here is clear what
the meaning of drop you are drafting the
surface as well so this add a draft here
for many degrees
and then I'll activate the drought 20
degrees so here you have your graphic
two directions with two different
drafting angles