SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

this is where we go to talk about the
opposite surface we have this part
created in the previous tutorial let's
try to make some opposite surface from
its name you are able to duplicate a
surface you are choosing and make
opposite from it so let's try to select
that surface
activate the upset so simply you created
an opposite surface stuff and here you
have a distance you choose then you have
also to reverse direction
I'll see here you need all done you can
take it off the surface it can make some
kind of a designing for your surface for
example you can offset some parts to
make it like the appearance changing
appearance and then deleting the
original services so just try to make
other of sip on these connected surfaces
here let's lick opposite surface few
selection and select this surface
surface then +1 you're done click OK so
you created your opposite surface the
side one again on that cylinder offset
your selection on path cylinder stick
the top plane top select clip out this
surface then we are able to fill the
surface between these two with some kind
of fill surfacing
so let's try to review the affiliate
surface try to build a service this way
the Philips surface in this case the
planar surface will not work or blow my
whistle
taking flat surfaces if you pick John as
able to slipping only close profile so
let's select the fluid surface this edge
that edge so you see that surface is
created to fill this gap okay so you
fill in that surface