IT & Software Exam > IT & Software Videos > SolidWorks: Essential Training (All Commands included) > SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface
SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
FAQs on SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture - SolidWorks: Essential Training (All Commands included) - IT & Software
| 1. How do I offset a surface in SolidWorks 2014? |  |
Ans. To offset a surface in SolidWorks 2014, follow these steps:
1. Select the surface you want to offset.
2. Go to the "Insert" tab and click on "Offset Surface" in the Surface toolbar.
3. In the Offset Surface PropertyManager, enter the offset distance and select the direction.
4. Choose additional options like merging with the original surface or creating a new surface.
5. Click on "OK" to create the offset surface.
| 2. Can I offset multiple surfaces at once in SolidWorks 2014? | |
Ans. No, in SolidWorks 2014, you cannot offset multiple surfaces at once. You need to select and offset each surface individually. However, you can use the "Offset Surface" feature multiple times to offset multiple surfaces sequentially.
| 3. How can I fill a surface in SolidWorks 2014? | |
Ans. To fill a surface in SolidWorks 2014, follow these steps:
1. Select the boundary edges or curves of the surface that you want to fill.
2. Go to the "Insert" tab and click on "Fill Surface" in the Surface toolbar.
3. In the Fill Surface PropertyManager, select the options for filling the surface, such as boundary conditions and tangent edges.
4. Adjust the additional settings if required.
5. Click on "OK" to create the filled surface.
| 4. Is it possible to fill irregular or complex surfaces in SolidWorks 2014? | |
Ans. Yes, it is possible to fill irregular or complex surfaces in SolidWorks 2014 using the "Fill Surface" feature. The Fill Surface tool allows you to create a smooth surface that blends seamlessly with the surrounding geometry, even if the initial surface shape is irregular or complex.
| 5. Can I edit the offset or filled surfaces after creating them in SolidWorks 2014? | |
Ans. Yes, you can edit the offset or filled surfaces after creating them in SolidWorks 2014. To edit the offset surface, you can double-click on the surface in the feature tree to open the Offset Surface PropertyManager and modify the offset distance or other parameters. Similarly, to edit the filled surface, you can double-click on the surface in the feature tree to open the Fill Surface PropertyManager and make the necessary changes to the fill options and settings.
Text Transcript from Video
this is where we go to talk about the
opposite surface we have this part
created in the previous tutorial let's
try to make some opposite surface from
its name you are able to duplicate a
surface you are choosing and make
opposite from it so let's try to select
that surface
activate the upset so simply you created
an opposite surface stuff and here you
have a distance you choose then you have
also to reverse direction
I'll see here you need all done you can
take it off the surface it can make some
kind of a designing for your surface for
example you can offset some parts to
make it like the appearance changing
appearance and then deleting the
original services so just try to make
other of sip on these connected surfaces
here let's lick opposite surface few
selection and select this surface
surface then +1 you're done click OK so
you created your opposite surface the
side one again on that cylinder offset
your selection on path cylinder stick
the top plane top select clip out this
surface then we are able to fill the
surface between these two with some kind
of fill surfacing
so let's try to review the affiliate
surface try to build a service this way
the Philips surface in this case the
planar surface will not work or blow my
whistle
taking flat surfaces if you pick John as
able to slipping only close profile so
let's select the fluid surface this edge
that edge so you see that surface is
created to fill this gap okay so you
fill in that surface
opposite surface we have this part
created in the previous tutorial let's
try to make some opposite surface from
its name you are able to duplicate a
surface you are choosing and make
opposite from it so let's try to select
that surface
activate the upset so simply you created
an opposite surface stuff and here you
have a distance you choose then you have
also to reverse direction
I'll see here you need all done you can
take it off the surface it can make some
kind of a designing for your surface for
example you can offset some parts to
make it like the appearance changing
appearance and then deleting the
original services so just try to make
other of sip on these connected surfaces
here let's lick opposite surface few
selection and select this surface
surface then +1 you're done click OK so
you created your opposite surface the
side one again on that cylinder offset
your selection on path cylinder stick
the top plane top select clip out this
surface then we are able to fill the
surface between these two with some kind
of fill surfacing
so let's try to review the affiliate
surface try to build a service this way
the Philips surface in this case the
planar surface will not work or blow my
whistle
taking flat surfaces if you pick John as
able to slipping only close profile so
let's select the fluid surface this edge
that edge so you see that surface is
created to fill this gap okay so you
fill in that surface
Related Exams
About this Video
|
4.94/5 Rating |
|
Dec 23, 2024 Last updated |
Video Description: SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface for IT & Software 2024 is part of SolidWorks: Essential Training (All Commands included) preparation.
The notes and questions for SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface have been prepared according to the IT & Software exam syllabus.
Information about SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface covers all important topics for IT & Software 2024 Exam.
Find important definitions, questions, notes, meanings, examples, exercises and tests below for SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface.
Introduction of SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface in English is available as part of our SolidWorks: Essential Training (All Commands included) for IT & Software & SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface in
Hindi for SolidWorks: Essential Training (All Commands included) course. Download more important topics related with notes, lectures and mock test series for
IT & Software Exam by signing up for free.
Description
Video Lecture & Questions for SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software - IT & Software full syllabus preparation | Free video for IT & Software exam to prepare for SolidWorks: Essential Training (All Commands included).
Information about SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface
Here you can find the meaning of SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface defined & explained in the simplest way possible.
Besides explaining types of SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface theory, EduRev gives you an ample number of questions to practice SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface tests,
examples and also practice IT & Software tests.
|
Explore Courses for IT & Software exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,past year papers
,mock tests for examination
,Extra Questions
,video lectures
,Viva Questions
,Semester Notes
,Free
,Summary
,ppt
,practice quizzes
,SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Exam
,Important questions
,Previous Year Questions with Solutions
,MCQs
,Objective type Questions
,Sample Paper
,shortcuts and tricks
,study material
,SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
;
Study SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface on the App
Students of IT & Software can study SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of SolidWorks 2014 Surface Tutorial 79: offset surface and fill surface is prepared as per the latest IT & Software syllabus.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup