SolidWorks 2014 Weldments Tutorial 102: Locate Profile Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

in the previous tutorial we could rotate
the members to have these trade members
as we wanted and as the normal tables
looks like but here we still have a
problem that this member is intersecting
with this Willman and in reality we can
imagine this type of world means should
have a hole in there and we're dead but
it is not logical cause normally this
member should laying outside here so we
need in this case to relocate the first
member group of members let's edit that
member try to recreate the profile so
you remember we have this group selected
so just go representing the members here
so for this case you need to go to
locate profile here and select where
exactly these members should lay
according to the group slitted or
according to the sketch now we have our
members are centered in the center of
that sketch and if you hover over here
you have the chance to select other
alignment tool or way to rock it with
them let's select this point you members
are laying inside your sketch in the
middle of the vertical link click ok so
you have look here or your provider
would look like but the sir is not the
shape we want we can again get it
profile and find where is the point or
we want to lik e over file so to get
there
Debra licks center you can select this
boy the center to the middle so first we
should select locate book profile speak
that point click okay so now you have
your link is on the right place so this
is the future going to be winded with
this sparse so now we fix in that
intersection by locating you our profile