IT & Software Exam > IT & Software Videos > SolidWorks: Essential Training (All Commands included) > 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate
117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
FAQs on 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture - SolidWorks: Essential Training (All Commands included) - IT & Software
| 1. What is a perpendicular mate in SolidWorks assembly? |  |
Ans. A perpendicular mate in SolidWorks assembly is a type of mate that aligns two components at a 90-degree angle to each other. It ensures that the selected faces or edges of the components are perpendicular to each other, allowing for a precise alignment in the assembly.
| 2. How can I apply a perpendicular mate in SolidWorks assembly? | |
Ans. To apply a perpendicular mate in SolidWorks assembly, follow these steps:
1. Open the assembly.
2. Select the first component and the face or edge that you want to mate.
3. Select the second component and the corresponding face or edge.
4. Right-click on one of the selected entities and choose "Mate".
5. In the Mate PropertyManager, select "Perpendicular" from the Mate type drop-down menu.
6. Click "OK" to apply the perpendicular mate.
| 3. Can I use a distance mate along with a perpendicular mate in SolidWorks assembly? | |
Ans. Yes, you can use a distance mate along with a perpendicular mate in SolidWorks assembly. A distance mate allows you to specify the distance between two components, while a perpendicular mate ensures their alignment at a 90-degree angle. By using both mates, you can achieve both distance and perpendicularity constraints in your assembly.
| 4. Are there any limitations to using perpendicular mates in SolidWorks assembly? | |
Ans. Yes, there are a few limitations to using perpendicular mates in SolidWorks assembly. Some of them include:
- Perpendicular mates cannot be applied between cylindrical faces or edges.
- Faces or edges that are not parallel to the primary planes (front, top, right) may not mate perpendicular to each other.
- If a component is already fully defined or has existing mates, applying a perpendicular mate may result in over-defining the assembly.
| 5. Can I modify or delete a perpendicular mate in SolidWorks assembly? | |
Ans. Yes, you can modify or delete a perpendicular mate in SolidWorks assembly. To modify the mate, simply double-click on it in the FeatureManager design tree and adjust the desired parameters in the Mate PropertyManager. To delete the mate, right-click on it in the FeatureManager design tree and choose "Delete".
Text Transcript from Video
this day we're going to talk about the
next type of myths the perpendicular
myth this delete that last mid met and
to avoid any over defining of problem
including the new perpendicular myth
let's click on that surface let's pick
two surfaces I speak this bottom surface
so be make sure that you're in the right
surface
so here we have the surface mated with
this service but we wanted to be
perpendicular so here you have that
perpendicular relation is done so you
are done click OK to fix it more you can
make this edge coincident with the edge
so you have sort of the words
automatically select in the constant
because it is originally to be working
so when you are done click OK
so here you have this perpendicular
relation is done so with the distance
you can also add distance for example
this is perpendicular or this constant
you can edit it and add some distance to
change the place view one
so this is the perpendicular net or
relation
next type of myths the perpendicular
myth this delete that last mid met and
to avoid any over defining of problem
including the new perpendicular myth
let's click on that surface let's pick
two surfaces I speak this bottom surface
so be make sure that you're in the right
surface
so here we have the surface mated with
this service but we wanted to be
perpendicular so here you have that
perpendicular relation is done so you
are done click OK to fix it more you can
make this edge coincident with the edge
so you have sort of the words
automatically select in the constant
because it is originally to be working
so when you are done click OK
so here you have this perpendicular
relation is done so with the distance
you can also add distance for example
this is perpendicular or this constant
you can edit it and add some distance to
change the place view one
so this is the perpendicular net or
relation
Related Exams
About this Video
|
4.89/5 Rating |
|
Nov 23, 2024 Last updated |
Video Description: 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate for IT & Software 2024 is part of SolidWorks: Essential Training (All Commands included) preparation.
The notes and questions for 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate have been prepared according to the IT & Software exam syllabus.
Information about 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate covers all important topics for IT & Software 2024 Exam.
Find important definitions, questions, notes, meanings, examples, exercises and tests below for 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate.
Introduction of 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate in English is available as part of our SolidWorks: Essential Training (All Commands included) for IT & Software & 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate in
Hindi for SolidWorks: Essential Training (All Commands included) course. Download more important topics related with notes, lectures and mock test series for
IT & Software Exam by signing up for free.
Description
Video Lecture & Questions for 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software - IT & Software full syllabus preparation | Free video for IT & Software exam to prepare for SolidWorks: Essential Training (All Commands included).
Information about 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate
Here you can find the meaning of 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate defined & explained in the simplest way possible.
Besides explaining types of 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate theory, EduRev gives you an ample number of questions to practice 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate tests,
examples and also practice IT & Software tests.
|
Explore Courses for IT & Software exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
study material
,Previous Year Questions with Solutions
,Objective type Questions
,Semester Notes
,mock tests for examination
,video lectures
,Exam
,Free
,Extra Questions
,117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Viva Questions
,117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,Summary
,Important questions
,ppt
,Sample Paper
,117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software
,past year papers
,practice quizzes
,shortcuts and tricks
,MCQs
;
Study 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate on the App
Students of IT & Software can study 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of 117 SolidWorks Assembly Tutorial: Perpendicular mate; distance mate is prepared as per the latest IT & Software syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup