184 SolidWorks Mold ToolsTutorial: Parting Surfaces (what/why; inserting; options; manual editing) Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

tutorial number 184 in this tutorial
we'll talk about the next command in the
more tools menu the parking surface and
we will see what are the important
circles and why we need them and see how
to set parking surfaces and have a look
at the selection manager options and the
surfaces types and then we will see how
to edit departing surface manually when
and why and then have a look at the in
the mold folders here we have the mobile
cover from the previous tutorial where
when we perform the shut off surfaces
which are now ready and you may wonder
this check of surfaces are the parting
surface between the more parts cavity
and cool but on the border of the mobile
but the mall exceeding the border of the
mode so that is the work of the
importing surface is to extend the shut
off surfaces so in other word the
parting surfaces parking services are
extend to the shut of services we call
also the shell of surfaces as well
parting surfaces but on the mobile area
and for the bottom surface it takes the
parting lines as reference from where it
will extend so as you notice here we
have the red shut off surface on the
mobile and here it is on the parking
lines and now we will extend that
surface to cover the mold blocks to
insert a parking surface click on
parking surface over there and here you
will get the option
in this case we will pick the
perpendicular to surface because we know
the pole surfaced for the vault ever
which was the plane which is already
silicon over there but in some products
you need to choose normal surface or
tangent to surface so in case of we
picking the tangent sir the surface you
not noticed any difference because it
will be already tangent to the pole
surface but if we pick the number-two
surface you will see the difference over
there but in this case we didn't have
any complicated product one this might
be easy to extract it is enough to
perpendicular to the pole and here the
parting line addressed it is the edges
or from where you extend the surface and
the parking surface here you can reverse
the direction or the parking surface but
this is not what case we need to reverse
the direction here we can make it more
horizontal can size
they'll make 50
and here you have the angle in case if
we use Homer to surface here you are
able to change as well the angle of the
surface related to the parking line here
for example if we increase it but as we
said we will pick the perpendicular to
the pole
and here you select the type of
smoothing if you pick the top layer you
might not see any difference because we
don't have any child inches or open
pictures so you not notice any
difference we will try to have an
example with another case where the
parking surface is separated
in the last options we have me all
surfaces in this case we have only one
surface there is no more than on the
surface so that will not make any
difference here is the preview and the
manual mode here you can modify or edit
the parking surface if you have a more
complicated chip but in this case we
don't need to use the manual mode
because this is the default shape and as
we said we will have another case where
we need to edit the importance manually
so this look fine
when you are done click OK so here we
have a departing surface which is going
to separate between the core activity
outside the bottom line now let's have a
look at the mall folders from the
previous tutorial we have 22 cavity
surface bodies which represent the
inside over there and 22 for deco and we
have one more surface so the total
number of surfaces are 45 and all of
them will have a purpose to separate
between the cool activity and here is
departing surface which we added
in this tutorial
you