AutoCAD 3D Beginner Video Tutorial - Create first 3D Object - 15 Video Lecture | Complete Course of AutoCAD 3D (Basic & Advanced) - Software Development

in previous tutorial we have learned the
basics of 3d so in this tutorial we will
be making some objects so that we will
get more hands-on basics of 3d then with
so we will be creating this object so
you will understand the 3d basic
concepts in more detail so we will start
out okay
so as we know we have to at first we
have to as object is bigger so if we set
the limit bounded by 200 limits 0 comma
0 200 comma 200 then zoom all to apply
the limit then to view the red axis we
will give southeast isometric then we
will use this is icon gamma UCS icon now
in eg say it will remain on left side so
at first you have to divide the three
object in different section so that you
can plan your creation so there are 4
atoms are there so this bottom plate is
there 1 1 2 by 64 then these 2 blocks
are there and one hole is there so there
are 4 atoms so at first we will be
creating 1 1 2 by 64 rectangle and then
we will place pulling it to 16 with ID
so the grating 64 by 1 1 2 rectangle
using line command we will create it so
we will make it or Thorne using a fit so
you want it 64 then this Lynch would be
1 1 2 1 1 2 then again 64 you will track
it from this point and we are clear
right Lea can enter so we have created
this base rectangle then we will place
full it give a height of 12 so this
player the base plate is ready so this
base plate is ready now we will create
these 16 by 32 object by copy edges so
it is on both the sides creating at 16
by 32
copy ages so from editing toolbar we can
do that
copy ages select this edge that we will
copy on 32 distance a click enter base
point Direction 32 I skip to come out
again this it should be on 16 so again
we will say copy edges this edge right
click enter baseman Direction 16 so the
shape is created here then on this side
also we will be needing same way so
again we will see copy H this is right
click enter base point direction 32
distance same way this on the 8 distance
so again we will say copy H this is
enter or right click enter base point
Direction 16 distance so these two
conover this is already so we will place
pull those sections so this section will
be place pooling at a distance of height
of 40 from bottom 16 we already used
that means for 2020 for distance so will
be extruded for 24 right same way on
this side also risk for this section 24
right so these three objects are created
we can view that in conceptual visual
style in this way two objects are
created then internal hole before that
we will remove these lines so by going
to 2d wireframe we can erase those lines
so now we do not want these lines we
will here is it inter rightly then
internal shape we are to create so
internal change is the on 40 distance
from this side 20 from this side 24 and
32 so 40 32 so we'll copy this age on 40
and 30 to copy a cheese
this is inter base point direction 40
then come out skip then again now this
has become a simple age so we can copy
using this 2d copy command copy this
rightly base point Direction 32 distance
so same way this age is on 20 distance
we will say copy H this is right click
enter best friend Direction 20 distance
then same way it will be also on 20
distance again I will say copy H this is
rightly enter basement direction 20
distance so in this we internal
rectangle has been created so we can
create the hole using crystal command so
praiseful select internal rectangle go
download and click so in this way this
our object has been created unwanted
lines we can e this by going to 2d
wireframe and using it as command so can
we can reduce the unwanted lines so in
this way we are created this object we
can be read from all the directions
using util 1 or isometric toolbar is
there so that also we can use or we can
use the orbit button so that we can we
will be you can view from different
visual styles also but we already know
how to use the colors so one of the
other ways by selecting on this also you
can give the color press escape to come
out so you see this first object is
created then just it is this object and
we will be creating the next object so
again we will go to word UCS so X Y will
be horizontal and red will be vertical
so now next object is this one the step
object so here again we have to create
the zoom it down
so your base distance is 1 0 4 1 so
there are 1 2 3 objects are there for so
at first we will create a cube of 1 0 4
72 and 48 so 1 0 2 by 72 height will be
creating the rectangle at first so 1 0 4
by 72 so line command so everything is
well said so line then give the width so
it is 1 72 72 then Direction is so
before that then 1 0 4 so we will say
here 1 0 4 and we will crack endpoint
enter then we will press pull it and
give the height so principle height of
70 14th so this has been created then
for those steps leading those lines 24
24 distance and 24 from this side also
so using copy edges we can do that
so copy H this is and right click enter
base point 24 again copy H this edge
right click enter basement direction
24th again this age right click enter
basement Direction 24 so these layout we
have created on the top so I will press
pull it for desired depths of first is
16 depth or we can say 32 for this date
so this portion will be pressed pulling
by 32 downward so go down 32 then next
is again 16 depth step is there second
section will be pressed filling by 16 so
select the section go down 16
so in this way this object has been
created you will go to 2d wireframe and
erase the unwanted lines so in this way
the second object is created so in this
way we will stop here expose one