AutoCAD 3D Glass Tutorial | AutoCAD 2010 | Apply Material; Download Block Video Lecture | Complete Course of AutoCAD 3D (Basic & Advanced) - Software Development

so in this tutorial we will going to
learn how to create a 3d class in
AutoCAD so once it is created it should
look like this so we will apply the
glass materials to the glass and we will
create a background and bottom surface
also so that it can represent them
properly so let's start with AutoCAD so
at first we have to we will go to right
lane so we will choose your right so we
gotta work on the right we don't want to
use just in the middle so we will see
UCS icon no region then we will create a
profile and then duvall it so let's
create a profile pic arc three-point arc
first point second point Third Point
so this first profile is ready so in the
corner we want one more profile so again
we will take arc then first point second
point and third point at the end escape
so this is top profile is ready now in
the bottom we will put a vertical line
here so we will take a line so here we
will put a vertical line make a fit or
thon then from here we will make a
inclined line so we will create an
inclined line from here and then one
horizontal line so this will be the
bottom and this is the centerline of the
glass now we will connect this using a
pilot so just say fill it then rightly
radius take some radius suppose I will
take this much is the radius then first
first object second object
fill it radius this is my radius first
my pet we will just extend it so just
take an extent extent so up to this I
want to extend and okay extend and just
trim the unwanted shape so this has been
trimmed so now I want to connect this to
using period so I will just repeat it
yes join this arc enter escape
then I will offset this upset by some
small distance suppose point one then I
will all fit it inside okay
they had the corner I will create a two
point circle so I will say circle two
point then the first point second point
then I will trim this unwanted shape
unwanted arc after that now I have to
connect here so here also I will use arc
arc endpoint of this mccourt off and and
I will take the nearest point nearest
okay so I will then connect it using P
edit so just trim this unwanted line
trim okay now just connect this using P
edit so that we will form a single
continuous line polyline join select all
enter escape so this has been found
properly will switch to southeast
isometric view so this profile is ready
now we will revolve this profile using
the wall command so we'll just say the
wall select object
enter so around this line we want to
reward center line in a 60 degree so
this hourglass is ready we can see it in
conceptual visual style so in this way
the glass is ready now we want to apply
material and see how it look likes so
before rattling metal we will just
create a scene on around so just at the
bottom we will create one circle so it
will form as a bottom surface so we just
have to change the view to view then you
see a stop we want to work on top then
create a circle with the bottom center a
larger circle okay now we will convert
this circle into region so we will just
say region so home region select the
circle enter so it has been converted
into region and some background surface
is needed so we will just create one arc
just say arc then give the three points
this is first point this is second
quadrant point then this is third
quadrant here on this side so this arc
is ready then we will extrude that arc
using extruder command so we will just
say extrude then select the objective
should last enter give the height how
much height you want so you will be
creating a background
so we are given the height okay now we
will apply metal to this just orbit it
so that we can view the proper shape
okay I'll just zoom it and then saying
the metal you want to apply so here okay
so we want to apply a glass so from here
we will choose a glass suppose we go to
door and window material so yeah plain
glass clear glass is there just Sigler
click on glass material then click on
the wheel glass we created and just
enter so you can see how it will look
like by going to render tab and click
here and say material and texture on so
it has become transparent so same way we
will apply the flooring also suppose so
we will we will just again click here we
will take floating material samples so I
want to finish suppose I want this one
cork at the bottom skip and then I want
surface this bamboo for the vertical
surface so in this way this is ready
then we can see how it look likes by
pressing on render just surrender so it
will create the image for us
Cindy in this way it has created