AutoCAD 3D to 2D Conversion Tutorial | Flatshot Command | AutoCAD 2010 Video Lecture | Complete Course of AutoCAD 3D (Basic & Advanced) - Software Development

in this tutorial we will see how to
convert a 3d model into a 2d drawings so
this is a 3d model that we want to
convert to two drinks sad firstly you
have to choose the side you want to
convert so you have to first your change
your view to that side suppose I want to
convert talks you to to return so I will
just say top then just zoom - then from
this section plane select cloud shot
command flat shot then you can defend
the color for the foreground lines
suppose I want lines to be in red
foreground lines line type to be
continuous then of skewed lines I want
to show I want color to be in blue and
line type to be redone so Eden is not
available so I will say other load click
inside this edge so you done select
leaden okay so in this basic requirement
has been defined if you want to include
initial edges you can say that we also
just say create click the location where
you want your of you and just press give
the scale factor if you want to change
the scale otherwise press ENTER for one
one enter and just double check the
roller so that you can use the top view
has been created then I want to create
the right set of right side side view so
I will just say is right so I shift it
to right then again I will repeat the
same process from section I will say
flood shot then all things are depends I
will just say create give the base point
enter enter enter if you want to use
some rotation angle that also you can
give that so sad you is ready tough you
is ready I want the front so I will
different so this
front view so again I will select from
section slide shot then create give the
base point enter enter enter so in this
way three views are created you can
press the shift n roller to see it to
orbit it and see the views so these
views are created now I do not want this
3d model so I will just create one layer
close the layer layer box and I will
convert this object to that layer layer
1 and I will make that layer 1 off
so I will escape then I
at layer 1 of so this layer is removed
and these lines I do not want I will
erase that lines so in this way only now
2d views are available so these are in
different planes so I can rotate them
just click on the views silly rotation
direction I want red and give the angle
so because I want to make it vertical so
I will just click above a press escape
so that this has been converted top view
then side you click on the side you
select this blue I want to rotate it
vertically so blue this blue direction
and give the angle how you want it to be
look like so just click OK
just select then select W then give the
direction how you want to rotate so at
the time of rotation see that whether
your direction is correct with respect
to the views to be generated so you just
click once you find that it is correct
justly and press escape so I will go to
front view front so all three use and
ring converted to front so I will just
move each view so M enter select one
view of you enter give the base point
make orth off F it then drag the point
so I want to want this you to be in this
line then side you again move select
object enter base point give the
reference drag the point I want this to
be in this line so I will just track and
click so in this way we use a down now
hidden lines are not visible so just
increase the LTS you will taste command
give the inter scale so 20 so in this
way all reviews are created properly so
in this way you can convert your 3d
drawing to 2d views thanks for joining