Boolean Logic & Logic Gates: Crash Course Computer Science #3 Video Lecture | Understanding the Basics of Computer Science and Technology - Basic Technology

Hi, I’m Carrie Anne and welcome to Crash
Course Computer Science!
Today we start our journey up the ladder of
abstraction, where we leave behind the simplicity
of being able to see every switch and gear,
but gain the ability to assemble increasingly
complex systems.
INTRO
Last episode, we talked about how computers
evolved from electromechanical devices, that
often had decimal representations of numbers
– like those represented by teeth on a gear
– to electronic computers with transistors
that can turn the flow of electricity on or off.
And fortunately, even with just two states
of electricity, we can represent important information.
We call this representation Binary -- which
literally means “of two states”, in the
same way a bicycle has two wheels or a biped
has two legs.
You might think two states isn’t a lot to
work with, and you’d be right!
But, it’s exactly what you need for representing
the values “true” and “false”.
In computers, an “on” state, when electricity
is flowing, represents true.
The off state, no electricity flowing, represents
false.
We can also write binary as 1’s and 0’s
instead of true’s and false’s – they
are just different expressions of the same
signal – but we’ll talk more about that in the next episode.
Now it is actually possible to use transistors
for more than just turning electrical current
on and off, and to allow for different levels
of current.
Some early electronic computers were ternary, that's three states, and even quinary, using 5 states.
The problem is, the more intermediate states
there are, the harder it is to keep them all
seperate -- if your smartphone battery starts
running low or there’s electrical noise
because someone's running a microwave nearby,
the signals can get mixed up... and this problem
only gets worse with transistors changing
states millions of times per second!
So, placing two signals as far apart as possible
- using just ‘on and off’ - gives us the
most distinct signal to minimize these issues.
Another reason computers use binary is that
an entire branch of mathematics already existed
that dealt exclusively with true and false
values.
And it had figured out all of the necessary
rules and operations for manipulating them.
It's called Boolean Algebra!
George Boole, from which Boolean Algebra later got its name, was a self-taught English mathematician in the 1800s.
He was interested in representing logical
statements that went “under, over, and beyond”
Aristotle’s approach to logic, which was,
unsurprisingly, grounded in philosophy.
Boole’s approach allowed truth to be systematically
and formally proven, through logic equations
which he introduced in his first book, “The
Mathematical Analysis of Logic” in 1847.
In “regular” algebra -- the type you probably
learned in high school -- the values of variables
are numbers, and operations on those numbers
are things like addition and multiplication.
But in Boolean Algebra, the values of variables are true and false, and the operations are logical.
There are three fundamental operations
in Boolean Algebra: a NOT, an AND, and an OR operation.
And these operations turn out to be really
useful so we’re going to look at them individually.
A NOT takes a single boolean value, either
true or false, and negates it.
It flips true to false, and false to true.
We can write out a little logic table that
shows the original value under Input, and
the outcome after applying the operation under
Output.
Now here’s the cool part -- we can easily
build boolean logic out of transistors.
As we discussed last episode, transistors
are really just little electrically controlled switches.
They have three wires: two electrodes and
one control wire.
When you apply electricity to the control
wire, it lets current flow through from one
electrode, through the transistor, to the
other electrode.
This is a lot like a spigot on a pipe -- open
the tap, water flows, close the tap, water shuts off.
You can think of the control wire as an input, and the wire coming from the bottom electrode as the output.
So with a single transistor, we have one input
and one output.
If we turn the input on, the output is also
on because the current can flow through it.
If we turn the input off, the output is also
off and the current can no longer pass through.
Or in boolean terms, when the input is true,
the output is true.
And when the input is false, the output is
also false.
Which again we can show on a logic table.
This isn’t a very exciting circuit though
because its not doing anything -- the input
and output are the same.
But, we can modify this circuit just a little
bit to create a NOT.
Instead of having the output wire at the end
of the transistor, we can move it before.
If we turn the input on, the transistor allows
current to pass through it to the “ground”,
and the output wire won’t receive that current
- so it will be off.
In our water metaphor grounding would be like
if all the water in your house was flowing
out of a huge hose so there wasn’t any water
pressure left for your shower.
So in this case if the input is on, output
is off.
When we turn off the transistor, though, current
is prevented from flowing down it to the
ground, so instead, current flows through
the output wire.
So the input will be off and the output will
be on.
And this matches our logic table for NOT,
so congrats, we just built a circuit that computes NOT!
We call them NOT gates - we call them gates because they’re controlling the path of our current.
The AND Boolean operation takes two inputs,
but still has a single output.
In this case the output is only true if both
inputs are true.
Think about it like telling the truth.
You’re only being completely honest if you
don’t lie even a little.
For example, let’s take the statement, “My
name is Carrie Anne AND I’m wearing a blue dress".
Both of those facts are true, so the whole
statement is true.
But if I said, “My name is Carrie Anne AND
I’m wearing pants” that would be false,
because I’m not wearing pants.
Or trousers.
If you’re in England.
The Carrie Anne part is true, but a true AND
a false, is still false.
If I were to reverse that statement it would
still obviously be false, and if I were to
tell you two complete lies that is also false,
and again we can write all of these combinations
out in a table.
To build an AND gate, we need two transistors
connected together so we have our two inputs
and one output.
If we turn on just transistor A, current
won’t flow because the current is stopped by transistor B.
Alternatively, if transistor
B is on, but the transistor A is off,
the same thing, the current can’t get through.
Only if transistor A AND transistor B are
on does the output wire have current.
The last boolean operation is OR -- where
only one input has to be true for the output to be true.
For example, my name is Margaret Hamilton OR I’m wearing a blue dress.
This is a true statement because although
I’m not Margaret Hamilton unfortunately,
I am wearing a blue dress, so the overall
statement is true.
An OR statement is also true if both facts are true.
The only time an OR statement is false is
if both inputs are false.
Building an OR gate from transistors needs a few extra wires.
Instead of having two transistors in series
-- one after the other -- we have them in parallel.
We run wires from the current source to
both transistors.
We use this little arc to note that the
wires jump over one another and aren’t connected,
even though they look like they cross.
If both transistors are turned off, the
current is prevented from flowing to the output,
so the output is also off.
Now, if we turn on just Transistor A, current
can flow to the output.
Same thing if transistor A is off, but Transistor B in on.
Basically if A OR B is on, the output is also on.
Also, if both transistors are on, the output is still on.
Ok, now that we’ve got NOT, AND, and OR
gates, and we can leave behind the constituent
transistors and move up a layer of abstraction.
The standard engineers use for these gates are a triangle with a dot for a NOT,
a D for the AND, and a spaceship for the OR.
Those aren’t the official names, but that's howI like to think of them.
Representing them and thinking about them
this way allows us to build even bigger components
while keeping the overall complexity relatively
the same - just remember that that mess of
transistors and wires is still there.
For example, another useful boolean operation in computation is called an Exclusive OR - or XOR for short.
XOR is like a regular OR, but with one difference:
if both inputs are true, the XOR is false.
The only time an XOR is true is when one input
is true and the other input is false.
It’s like when you go out to dinner and
your meal comes with a side salad OR a soup
– sadly, you can’t have both!
And building this from transistors is pretty
confusing, but we can show how an XOR is created
from our three basic boolean gates.
We know we have two inputs again -- A and B -- and one output.
Let’s start with an OR gate, since the
logic table looks almost identical to an OR.
There’s only one problem - when A and
B are true, the logic is different from OR,
and we need to output “false”.
To do this we need to add some additional gates.
If we add an AND gate, and the input is
true and true, the output will be true.
This isn’t what we want.
But if we add a NOT immediately after this will flip it to false.
Okay, now if we add a final AND gate and send
it that value along with the output of our
original OR gate, the AND will take in “false”
and “true”, and since AND needs both values
to be true, its output is false.
That’s the first row of our logic table.
If we work through the remaining input
combinations, we can see this boolean logic
circuit does implement an Exclusive OR.
And XOR turns out to be a very useful component, and we’ll get to it in another episode,
so useful in fact engineers gave it its own
symbol too -- an OR gate with a smile :)
But most importantly, we can now put XOR into our metaphorical toolbox and not have to worry
about the individual logic gates that make
it up, or the transistors that make up those gates,
or how electrons are flowing through
a semiconductor.
Moving up another layer of abstraction.
When computer engineers are designing processors,
they rarely work at the transistor level,
and instead work with much larger blocks,
like logic gates, and even larger components
made up of logic gates, which we’ll discuss
in future episodes.
And even if you are a professional computer
programmer, it’s not often that you think
about how the logic that you are programming is actually implemented in the physical world
by these teeny tiny components.
We’ve also moved from thinking about raw
electrical signals to our first representation
of data - true and false - and we’ve even
gotten a little taste of computation.
With just the logic gates in this episode,
we could build a machine that evaluates complex logic statements,
like if “Name is John Green AND after 5pm OR is Weekend
AND near Pizza Hut”, then “John will want pizza” equals true.
And with that, I'm starving, I'll see you next week.