25- CATIA Beginner Tutorial Sketch Tree; hide; show; remaname manipulate;

tutorial number 25 in Katia for beginner
this is the last tutorial in the to the
sketching section and after that we're
going to move to the 3d modeling
features but in previous tutorials we
learn how to deal with DTD sketching
profiles and so on so we assume that you
don't have and difficulties in creating
sketches profiles and so on so that will
help you in creating quality 3d modeling
so it is step by step now we're going to
talk about gate last thing in sketch
sketching which is the sketch tree as
you notice we created all these profiles
in the previous tutorials and all of
them are in one sketch so if you delete
this sketch you're going to delete all
these shapes on profiles and this part
tree including this sketch tree you can
move it up and down by scrolling the
mouse wheel
if you press ENTER and scroll up and
down you zoom it in and out if you
expand the sketch name here you will
notice every single profile line point
has the place here reserved if you pick
this one it should be somewhere there
but let's take this line so this is the
line first line pick this line so
anything you sketch here has an entity
under this sketch to sketch
and if you right-click on the sketch to
parties you are able to change the the
name fly okay as well you can do
changing the name of any entities inside
this sketch for parties line also you
can delete line for example if you pick
this line right click any and also if
you go to right-click you have the basic
cup copy/paste anyone is familiar dips
and one thing is I show you if you want
to hide a profile for example let's pick
any profile here and right click hide
show so you're going to Heidi selected
inches control see also you can select
what you want to hide from here from
three beside this line hide if you want
to show it again
you can notice how the I can change show
so one thing is that you if you click on
this brush you will notice that your
sketch change into dark and you are not
able to to work with it
you can't move it or zoom it or anything
instead you are working with the tree so
you can move it up and down for example
if you use the same mouse commands to
zoom in and zoom out for the court as we
learned before but you're going to to
zoom in the three generals we have a lot
of entities here and if you use the
simple amount of moving the sketch as we
learned in the real story we're going to
move the tree so now to reactivate the
sketch area again click on the white
brush now use the mouse command you are
zooming in an hour this sketch not the
tree and with it and if you want to
freeze it here you are turning it into
dark so this is now the last thing with
the sketches I assume now there's no
difficulties dealing with sketching
where did you learn a lot about to the
sketching profiles constraint dimensions
so now it's time to move to 3d modeling
features so here is exit our sketch and
see you in the next tutorials