27- CATIA Beginner Tutorial :Drafted Filled Pad Video Lecture | Learning CATIA: For Beginners - Design Softwares

tutorial number 27 let's start making a
sketch let's make a rectangle and exit
sketch and let's make it about as we
learn in the previous tutorial so now we
have a extruded rectangle so let's
create sketch on this surface as we knew
that we can make sketches on flat
surfaces not only on these three
original surfaces here or planes so
let's choose this surface make sketch
now you are sketching on that surface so
we said before that we are going to use
the 3d geometry feature later when we
have some 3d models and this time we're
going to use the project 3d element so
now we can select which edges we want to
project and it is a good tool that saves
a lot of time for example if you have
complicated profiles or edges need some
time to create the same profile but by
using this feature you just go and click
create that sketch on this plane so now
we have a sketch the same dimension like
the rectangle behind as you remember in
the inventor tutorials inventor
automatically projecting the edges if
you are making a sketch on any flat
surface but here you need to use the
tragic the edges so now let's accept and
it's extrude the created sketch this
sketch number two which has the same it
is not seen here
you may hear hide so we have this
projected sketch so let's show again the
bad as we learned before how to show
unhide and let's this time choose the
drafted Philip plot and choose this
sketch here you are you can specify the
thickness of your extrusion for the
limit we need this surface and you can
choose the degrees drafting and if you
want to make fill it around edges make
preview you can notice now we drafted
the whole part with this dimensions if
you want to edit it we can make the
double click on it here you can change
the draft angle review then okay we want
to change deflate of the edges come okay
and here you have deep the up or
affiliate you can make it three preview
okay so this is how to use be drafted
fillet cut
the next tutorial we are going to use
the multi but so see you in the next
tutorial