29- CATIA Beginner Tutorial: Pocket- Types Video Lecture | Learning CATIA: For Beginners - Design Softwares

this is car number 29 while the pocket
recreated this profile and made apart
from them
now let's sketch on that surface create
a circle and the center of it and exit
and let's use the pocket feature so here
you can specify the type of cut inside
either to make it a 40 millimeter
preview we have extruded that 450
millimeter now so we have this cut not
through all this part you want to be
through all you can make it up the next
or up the loss give you the same result
and for up surface you can use this last
surface preview okay so now we made this
cut and again you just create a sketch
from that surface let's create a good
angle and say pocket so this this time
make it a dimension okay if you reverse
the direction to cut the other side to
be unnecessary so make sure you are
cutting on the right side and this mail
preview okay
now let's try to create a sketch on that
surface and let's just make a circuit
here see
so we have this circuit now let's
activate the pocket here we can make
optics it's going to cut through all and
if you make it just a dimension and day
and let's make the dimension to be 1/100
and let's click on the mirror extent so
it will make a cut also for 100
millimeter mirror on the second side
preview
then press ok controls it also you can
make this issue with choosing for
example let's make this for 8 millimeter
preview and now let's go on the other
side without cutting this part we can
more you have the second direction can
give it a 20 millimeter depth
as you can notice click preview
so we cut it in this bar so this is the
different demure extent on the second
limit that you can cut through second
direction click okay so now let's go to
the third solid part and show another
this first create a sketch in this
smaller it's just me circle set pocket
and this time we're going to make up the
next we will activate the thick and we
will make a thickness of two millimeter
review okay so we make a thick cut
beside this solid part so I hope this
doesn't about book it was useful and the
next tutorial we're going to talk about
the second type of pockets drafted
fitted pocket so see you in the next
tutorial