3D & Animation Exam > 3D & Animation Videos > Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx
Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation
FAQs on Siemens Nx Training Tutorial - UG Nx CAD Tutorial - How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation
| 1. How do I create a rib or stiffener in Siemens NX CAD? |  |
Ans. To create a rib or stiffener in Siemens NX CAD, you can follow these steps:
1. Open your NX CAD software and open the desired part or assembly.
2. Go to the "Modeling" tab in the toolbar and select the "Rib" or "Stiffener" command.
3. Define the start and end points of the rib/stiffener by selecting the appropriate edges or faces.
4. Specify the desired properties such as width, thickness, and height of the rib/stiffener.
5. Click on "OK" to create the rib/stiffener in your design.
| 2. What is the purpose of creating ribs or stiffeners in 3D CAD models? | |
Ans. Ribs or stiffeners are structural elements added to 3D CAD models to enhance their strength and rigidity. These features are commonly used in designs where additional support or reinforcement is required. Ribs or stiffeners can help prevent deformation, reduce material usage, and improve the overall structural integrity of the part or assembly.
| 3. Can I animate the creation of ribs or stiffeners in Siemens NX CAD? | |
Ans. Yes, Siemens NX CAD provides animation capabilities that allow you to visually demonstrate the creation process of ribs or stiffeners. By utilizing the animation tools, you can showcase each step involved in creating these features, including the selection of edges or faces, defining properties, and the final placement of the rib/stiffener.
| 4. Are there any specific design considerations when creating ribs or stiffeners in Siemens NX CAD? | |
Ans. Yes, when creating ribs or stiffeners in Siemens NX CAD, it is essential to consider certain design aspects:
- Ensure that the rib/stiffener is placed in areas where additional strength or support is needed.
- Optimize the dimensions and properties of the rib/stiffener to minimize weight and material usage.
- Avoid excessive thickness or width, as it may lead to manufacturing difficulties or unnecessary weight.
- Take into account any design constraints or requirements, such as clearance for adjacent components or assembly considerations.
| 5. Can I modify or edit the properties of ribs or stiffeners after they are created in Siemens NX CAD? | |
Ans. Yes, in Siemens NX CAD, you can easily modify or edit the properties of ribs or stiffeners even after their creation. By selecting the rib/stiffener feature, you can access its properties and make changes to dimensions, thickness, height, or any other attributes. This flexibility allows you to refine the design based on feedback or evolving requirements without starting from scratch.
Text Transcript from Video
in this tutorial we will see how to
create rib in NX so I want to create a
Riviere so at first I need to create a
plane
so take datum plane and I will take this
bisector method type is bisector so
select two reference planes true so your
plane will pass through the middle of
these two planes say ok then clear take
sketch I want to create sketch on this
new plane select the plane ok then I
have to create one line connecting two
end points will just take this end point
and this end point quickly then finish
sketch next is take extrude then select
this line now extrude is horizontal so I
want it vertical for that you have to
take this option here you have to select
- Z - Z Z Z axis so it will extrude
vertical then I want to you thickness to
the rib for that you have to use offset
in offset select suppose if you want the
symmetric rip select symmetry then you
can give the thicknesses here what
thickness you want the next option here
in limits you are to say until extended
then select the bottom horizontal
surface so we will just see the preview
so in this way the rib is created so
this this is OK for vertical and
horizontal surfaces suppose there is
some cylindrical surface cylindrical
cylinder is there then how to create the
rib that also we will see so just I will
hide this ok I will create one cylinder
axis I will create one circle suppose I
in the middle and convert it to center
line then now I will create a circle the
center okay
then finish sketch and extrude then okay
so here also I want to create a clip
here so again I have to create a plane
okay then sketch then finish sketch then
I can extrude then select this curve
again change the direction to minus Z C
axis then all till extended then preview
so here the rib is created but there is
a gap here if you see here is a gap so
to solve that so for that we have to
edit the sketch that line sketch
double-click on sketch then here we will
draw one smaller Zonta line from end of
this then any sketch then here you will
see that it will be mulch so just unite
to combine them okay so in this way
aggrieve is created for vertical surface
so thanks for joining we will stop
create rib in NX so I want to create a
Riviere so at first I need to create a
plane
so take datum plane and I will take this
bisector method type is bisector so
select two reference planes true so your
plane will pass through the middle of
these two planes say ok then clear take
sketch I want to create sketch on this
new plane select the plane ok then I
have to create one line connecting two
end points will just take this end point
and this end point quickly then finish
sketch next is take extrude then select
this line now extrude is horizontal so I
want it vertical for that you have to
take this option here you have to select
- Z - Z Z Z axis so it will extrude
vertical then I want to you thickness to
the rib for that you have to use offset
in offset select suppose if you want the
symmetric rip select symmetry then you
can give the thicknesses here what
thickness you want the next option here
in limits you are to say until extended
then select the bottom horizontal
surface so we will just see the preview
so in this way the rib is created so
this this is OK for vertical and
horizontal surfaces suppose there is
some cylindrical surface cylindrical
cylinder is there then how to create the
rib that also we will see so just I will
hide this ok I will create one cylinder
axis I will create one circle suppose I
in the middle and convert it to center
line then now I will create a circle the
center okay
then finish sketch and extrude then okay
so here also I want to create a clip
here so again I have to create a plane
okay then sketch then finish sketch then
I can extrude then select this curve
again change the direction to minus Z C
axis then all till extended then preview
so here the rib is created but there is
a gap here if you see here is a gap so
to solve that so for that we have to
edit the sketch that line sketch
double-click on sketch then here we will
draw one smaller Zonta line from end of
this then any sketch then here you will
see that it will be mulch so just unite
to combine them okay so in this way
aggrieve is created for vertical surface
so thanks for joining we will stop
Related Exams
About this Video
|
Dec 02, 2024 Last updated |
Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx for 3D & Animation2024 is part of 3D & Animation preparation. The notes and questions for Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx
have been prepared according to the 3D & Animation exam syllabus. Information about Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx covers all important topics
for 3D & Animation2024 Exam. Find important definitions, questions, notes, meanings, examples, exercises
and tests below for Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx.
Introduction of Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx in English is available as part of our 3D & Animation preparation & Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx in Hindi
for 3D & Animation courses. Download more important topics, notes, lectures and mock test series for 3D & Animation Exam by
signing up for free.
Description
Video Lecture & Questions for Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation - 3D & Animation full syllabus preparation | Free video for 3D & Animation exam.
Information about Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx
Here you can find the Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx defined & explained in the simplest way possible. Besides explaining types of Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx
theory, EduRev gives you an ample number of questions to practice Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx tests, examples and also practice 3D & Animation tests.
|
Explore Courses for 3D & Animation exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
Semester Notes
,study material
,Summary
,Important questions
,ppt
,MCQs
,practice quizzes
,Free
,Extra Questions
,Exam
,past year papers
,Previous Year Questions with Solutions
,video lectures
,Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation
,Sample Paper
,Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation
,Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx Video Lecture - 3D & Animation
,Objective type Questions
,Viva Questions
,mock tests for examination
,shortcuts and tricks
;
Study Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx on the App
Students of 3D & Animation can study Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of Siemens Nx Training Tutorial | UG Nx CAD Tutorial | How to create Rib / Stiffener in Nx is prepared as per the latest 3D & Animation syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup