Explore Exams
Login Signup
Sign in Open App
All Exams  >   NEET  >   Inorganic Chemistry for NEET  >   All Questions

All questions of General Principles and Processes of Isolation of Elements for NEET Exam

Clear all your doubts with EduRev

The purpose of adding cryolite is
  • a)
    to increase the electrical conductivity of pure aluminium
  • b)
    to lower the melting point of Al2O3
  • c)
    to remove the impurities as slag
  • d)
    to increase the Al% in the yield
Correct answer is option 'A'. Can you explain this answer?

Rohit Shah answered
Cryolite is used in the electrolysis of aluminium oxide. The mixture of cryolite and aluminium oxide has a lower melting point than pure aluminium oxide. This means a lower amount of energy is required to establish effective conditions for electrolysis and thus makes it more cost effective.

Can you explain the answer of this question below:

Which of the following contains both copper and iron?

  • A:

    Cuprite

  • B:

    Chalcocite

  • C:

    Chalcopyrite

  • D:

    Malachite

The answer is c.

Pooja Mehta answered
Chalcopyrite is a brass-yellow mineral with a chemical composition of CuFeS2. It occurs in most sulfide mineral deposits throughout the world and has been the most important ore of copper for thousands of years.
›  Chalcopyrite (CuFeS2) is the ore contains both copper and iron.
›  The largest deposit of nearly pure chalcopyrite ever discovered in Canada was at the southern end of the Temagami Greenstone Belt where Copperfield Mine extracted the high-grade copper.

One or More than One Options Correct Type
This section contains 5 multiple type questions. Each question has 4 choices (a), (b), (c) and (d), out of which ONE or MORE THAN ONE are correct.
Q. Which of the following is the correct combination?
  • a)
    Borax = Na2B4O7 . 5H2O
  • b)
    Colemanite = Ca2Br6O11 . 5H2O
  • c)
    Anglesite = PbCO3
  • d)
    Chile saltpeter = NaNO3
Correct answer is option 'D'. Can you explain this answer?

Nandini Iyer answered
Sodium nitrate is the chemical compound with the formula NaNO3. This alkali metal nitrate salt is also known as Chile saltpeter (large deposits of which were historically mined in Chile) to distinguish it from ordinary saltpeter, potassium nitrate. The mineral form is also known as nitratine, nitratite or soda niter.

Regarding cryolite incorrect statement is
  • a)
    It is an ore of Al 
  • b)
    The non-metal is fluorine
  • c)
    It is used in aluminium extraction from bauxite
  • d)
    Its formula is 3NaF. AIF3
Correct answer is option 'D'. Can you explain this answer?

Anisha Bose answered
Cryolite is an important ore of aluminum that is used in the extraction of aluminum from bauxite. It is a rare mineral that occurs in small quantities in Greenland, and its chemical formula is Na3AlF6.

Method used for obtaining highly pure silicon used as a semiconductor material, is [1994, 96]
  • a)
    Oxidation
  • b)
    Electrochemical
  • c)
    Crystallization
  • d)
    Zone refining
Correct answer is option 'D'. Can you explain this answer?

Srishti Sen answered
Si obtained by reduction of SiCl4 with H2 is further purified by zone refining method to get Si of very high purity. Silicon is purified by zone-refining process because the impurities present in it are more soluble in the liquid phase than in the solid phase.

Which one of the following is not a method of concentration of ore?
  • a)
    Gravity separation
  • b)
    Froth floatation process
  • c)
    Electromagnetic separation
  • d)
    Smelting
Correct answer is option 'D'. Can you explain this answer?

Vama Shah answered
Hey mate...Answer is smelting as it is the process of applying heat to the ore in order to extract the ore metal and the concn of ore is purely different than smelting so yah that's d reason behind hope it helped uh...!!!!!:)

For which oxide formation ΔG° is more negative than Gr2O3?
  • a)
    FeO
  • b)
    ZnO
  • c)
    Al2O3
  • d)
    MgO
Correct answer is option 'C,D'. Can you explain this answer?

Anuj Unni answered
Introduction:
The question asks us to determine which oxide formation has a more negative value of standard Gibbs free energy of formation (ΔG°f) compared to Gr2O3. The standard Gibbs free energy of formation is a measure of the thermodynamic stability of a compound, with more negative values indicating greater stability.

Analysis:
To compare the ΔG°f values of different oxides, we need to refer to the standard Gibbs free energy of formation data. By comparing the values, we can determine which oxide formation is more stable (i.e., has a more negative ΔG°f value) than Gr2O3.

Options:

a) FeO:
The standard Gibbs free energy of formation for FeO is -272.8 kJ/mol. Since FeO has a more negative ΔG°f value than Gr2O3, it is more stable.

b) ZnO:
The standard Gibbs free energy of formation for ZnO is -318.3 kJ/mol. Since ZnO has a more negative ΔG°f value than Gr2O3, it is more stable.

c) Al2O3:
The standard Gibbs free energy of formation for Al2O3 is -1582.3 kJ/mol. Since Al2O3 has a more negative ΔG°f value than Gr2O3, it is more stable.

d) MgO:
The standard Gibbs free energy of formation for MgO is -601.6 kJ/mol. Since MgO has a more negative ΔG°f value than Gr2O3, it is more stable.

Conclusion:
Based on the comparison of the standard Gibbs free energy of formation values, the oxide formations with more negative ΔG°f values than Gr2O3 are Al2O3 and MgO. Therefore, the correct answer is option C and D.

Which metal is also found in sea beds ?
  • a)
    Magnesium
  • b)
    Calcium
  • c)
    Manganese
  • d)
    Aluminium
Correct answer is option 'C'. Can you explain this answer?

Kavita Joshi answered
Many thousands of square kilometres of the deep-sea floor are covered by metal-bearing nodules. They contain primarily manganese, but also nickel, cobalt and copper, which makes them economically promising.

In froth-floatation process, palm oil functions as :
  • a)
    Activator
  • b)
    Frother
  • c)
    Collector
  • d)
    Agitator
Correct answer is option 'B'. Can you explain this answer?

Surbhi Sengupta answered
Palm oil function as frother. It decreases the surface tension of the total solution, by which the formation of froth becomes easier.

Comprehension Type
This section contains a passage describing theory, experiments, data, etc. Two questions related to the paragraph have been given. Each question has only one correct answer out of the given 4 options (a), (b), (c) and (d)
                                                                           Passage
The natural substances in which metals occur in the earth are called minerals. A mineral has a definite composition. It may be a single compound or a complex mixture . It is usually associated with number of impurities. The minerals from which the metals can be conveniently extracted are called ores .Thus, all ores are minerals but all minerals are not ores. Depending on the composition ores are classified into different types such as oxides, sulphides, carbonates, halides, silicates etc.
Q. The impurities associated with minerals are called.
  • a)
    Gangue
  • b)
    Flux
  • c)
    Slag
  • d)
    Depressant
Correct answer is option 'A'. Can you explain this answer?

Priyanka Sharma answered
The correct answer is option A
The impurities associated with minerals used in metallurgy are collectively called Gangue.

. Malachite is an ore of:
  • a)
    Copper
  • b)
    Magnesium
  • c)
    Calcium
  • d)
    Both magnesium and calcium
Correct answer is option 'A'. Can you explain this answer?

Mira Sharma answered
The distinctive bright-green hydrous CARBONATE MINERAL malachite is a common but minor ore of copper. It is usually found in copper deposits associated with LIMESTONE, occurring with AZURITE as the weathering product of other copper ore minerals.

One or More than One Options Correct Type
Direction (Q. Nos. 11-15) This section contains 5 multiple choice questions. Each question has four choices (a), (b), (c) and (d), out of which ONE or MORE THAN ONE are correct.
Q. 
Purification of alumina is called
  • a)
    Baeyer’s proces
  • b)
    Hall process
  • c)
    Mond’s proces
  • d)
    Hoope’s proces
Correct answer is option 'A'. Can you explain this answer?

Universe Mystery answered
Baeyer's process is used to obtain pure alumina. as sodium silicate, leaving behind the impurities. The resulting solution is filtered, and cooled and neutralized with carbon dioxide to get aluminium hydroxide as precipitate leaving sodium silicate in the solution.

Which one of the following ores is concentrated by chemical leaching method?
  • a)
    Galena
  • b)
    Copper pyrite
  • c)
    CaO + SiO3
  • d)
    SiO2 and CaSiO3
Correct answer is option 'D'. Can you explain this answer?

Sreemoyee Choudhury answered
In this process the finely divided powdered argentite or the native silver or gold is treated with a dilute solution (0.5%) of sodium or potassium cyanide while a current of air is continuously passed. As a result silver pass into solution forming their respective soluble complex cyanides while the impurities remain unaffected which are filtered off.

Cryolite is the chief ore of
  • a)
    Aluminium
  • b)
    Zink
  • c)
    Iron
  • d)
    Copper
Correct answer is option 'A'. Can you explain this answer?

M. Vishnu answered
The cryolite mine Ivigtut, Greenland, summer 1940.It was historically used as an ore of aluminium and later in the electrolyticprocessing of the aluminium-rich oxide ore bauxite (itself a combination of aluminium oxide minerals such as gibbsite, boehmite and diaspore).

Refining of silver is done by
  • a)
    Cupellation
  • b)
    Poling
  • c)
    Liquation
  • d)
    Zone refining
Correct answer is option 'A'. Can you explain this answer?

Rohan Singh answered
Electrolysis. Electrolysis uses currents to give the energy needed to help a chemical reaction occur to break apart chemical bonds between metals and impurities. This method was first used in the late 18th century to separate tin and zinc from their salts. This method is also used for purifying aluminum.

Which one of the following ores is best concentrated by froath-flotation method ?
[AIEEE-2004]
  • a)
    Magnetite
  • b)
    Cassiterite
  • c)
    Galena
  • d)
    Malachite
Correct answer is option 'C'. Can you explain this answer?

Rajeev Saxena answered
Froth flotation method is used for the concentration of sulphide ores. The method is based on the preferential wetting properties with the frothing agent and water. In the given options, Galena (PbS) is the only sulphide ore. CORRECT OPTION IS C.

Aluminium is industrially prepared by -  
[AIEEE-2002]
  • a)
     Fused cryolite
  • b)
    Bauxite ore
  • c)
    Alumina 
  • d)
    Alumina mixed with molten cryolite
Correct answer is option 'D'. Can you explain this answer?

Gaurav Kumar answered
The correct answer is Option D.
The Hall–Héroult process is the major industrial process for smelting aluminium. It involves dissolving aluminium oxide (alumina) (obtained most often from bauxite, aluminium's chief ore, through the Bayer process) in molten cryolite, and electrolysing the molten salt bath, typically in a purpose-built cell.
 

In the froth floatation process for benefaction of the ores, the ore particles float because
  • a)
    They are light
  • b)
    Their surface is not easily wetted by water
  • c)
    They are insoluble
  • d)
    They bear electric charge
Correct answer is option 'B'. Can you explain this answer?

Pooja Mehta answered
Froth Flotation Process.
 Another method of concentration of ores is the Froth Flotation Method. This is the process for concentration of primarily sulphide ores. It has the advantage over gravity separation because it can collect even the extremely fine particles of minerals.

Which of the following chemicals are involved in froth floatation process?
  • a)
    Collectors
  • b)
    Depressant
  • c)
    Flux
  • d)
    Activators
Correct answer is option 'A,B,D'. Can you explain this answer?

Rajeev Saxena answered
In froth flotation the effectiveness of an air bubble to adhere to a particle is based on how hydrophobic the particle is. Hydrophobic particles have an affinity to air bubbles, leading to adsorption. Collectors are the main additives used to improve particle surfaces.

The substance not likely to contain CaCO3 is –              [AIEEE-2003]
  • a)
    Sea shells
  • b)
    Dolomite
  • c)
    A marble statue
  • d)
    Calcined gypsum
Correct answer is option 'D'. Can you explain this answer?

Lavanya Menon answered
The correct answer is option D
A) On heating, gypsum loses water and gives the hemihydrate (CaSO4. 1/2H2O) or the anhydrite. The hemihydrate known as Calcined gypsum/ Plaster of Paris / stucco is an important building material.
B) Seashells are the exoskeletons of mollusks such as snails, clams, oysters and many others. Such shells have three distinct layers and are composed mostly of calcium carbonate(CaCO​3).
C) Dolomite is an anhydrous carbonate mineral composed of calcium magnesium carbonate, ideally CaMg(CO3​)2​. 
D) A marble statue typically consists of calcium carbonate.
So Calcined gypsum does not have calcium carbonate.

A mineral is called an ore if
  • a)
    the percentage of metal content is more than 50 %
  • b)
    it is possible to isolate metal from it
  • c)
    a metal can be profitably extracted from it
  • d)
    if it is free from any earthly impurities
Correct answer is option 'C'. Can you explain this answer?

Anisha Deshpande answered
The Definition of an Ore
An ore is a type of mineral that contains a valuable metal or metal compound. It is a naturally occurring solid material from which a metal or valuable mineral can be profitably extracted. The classification of a mineral as an ore depends on certain criteria.

Criteria for Classifying a Mineral as an Ore
To be classified as an ore, a mineral must meet the following criteria:

1. Metal Content Percentage
The percentage of metal content in a mineral does not determine whether it is classified as an ore. Some ores may have a metal content of less than 50%, while some non-ores may have a higher metal content. Therefore, option A is incorrect.

2. Ability to Isolate Metal
For a mineral to be classified as an ore, it must be possible to isolate the metal from it. This means that the metal should be extractable from the mineral in a relatively straightforward manner. If it is not possible to isolate the metal from the mineral, it cannot be classified as an ore. Therefore, option B is correct.

3. Profitable Extraction
The extraction of metal from an ore should be economically viable. This means that the cost of extracting the metal should be lower than the value of the metal obtained. If the extraction process is not profitable, the mineral cannot be classified as an ore. Therefore, option C is correct.

4. Absence of Earthly Impurities
The presence of earthly impurities does not determine whether a mineral is classified as an ore. Ores often contain impurities that need to be removed during the extraction process. Therefore, option D is incorrect.

Conclusion
In conclusion, a mineral is called an ore if it is possible to isolate a metal from it, and if the extraction of the metal is economically viable. The percentage of metal content or the absence of earthly impurities are not determining factors for classifying a mineral as an ore.

The different number of non-metals present in fluorapatite are
    Correct answer is '3'. Can you explain this answer?

    Sankar Singh answered
    Fluorapatite is a mineral that belongs to the apatite group. It has the chemical formula Ca5(PO4)3F and is composed of calcium, phosphorus, oxygen, and fluorine. The number of non-metals present in fluorapatite can be determined by analyzing its chemical formula.

    Chemical Formula of Fluorapatite
    - The chemical formula of fluorapatite is Ca5(PO4)3F.
    - The formula can be broken down into its constituent elements as follows:
    - Calcium (Ca)
    - Phosphorus (P)
    - Oxygen (O)
    - Fluorine (F)

    Non-Metals Present in Fluorapatite
    - Non-metals are elements that lack metallic properties such as malleability, ductility, and conductivity.
    - In the chemical formula of fluorapatite, the non-metals present are phosphorus, oxygen, and fluorine.
    - Calcium is a metal, and therefore, it is not considered a non-metal.

    Conclusion
    - Fluorapatite contains three non-metals, which are phosphorus, oxygen, and fluorine.

    Comprehension Type
    Direction (Q. Nos. 16 and 17) This section contains a paragraph, describing theory, experiments, data, etc. Two questions related to the paragraph have been given. Each question has only one correct answer among the four given options (a), (b), (c) and (d).
    Passage
    Impure metals are purified by different methods in order to remove the undesired impurities. These methods depend on the nature of metal and nature of impurities. Liquation is used for purifying metals with low melting points like Bi, Sn, Pb, Hg etc. Distillation is used for volatile metals like Zn, Cd, Hg. Cupellation is used to purify silver metal with lead impurities. Electrolytic refining (Cu, Ag, Mg, Al) Zone refining (Si, Ge, Ga) Mond’s process (Ni) van Arkel process (Zr, Ti).
    Q. 
    In the extraction of nickel by Mond’s process, the metal is obtained by
    • a)
      electrochemical reduction
    • b)
      thermal decomposition
    • c)
      chemical reduction by aluminium
    • d)
      chemical reduction by carbon
    Correct answer is option 'B'. Can you explain this answer?

    Asha Nair answered
    The metal is obtained by thermal decomposition. Impure nickel is heated in a current of CO at 330-350 K. It forms volatile nickel carbonyl leaving behind the impurities.

    Molecular formula of Glauber salt's
    • a)
      MgSO4 . 7H2O
    • b)
      FeSO4 . 7H2O
    • c)
      CuSO4 . 5H2O
    • d)
      Na2SO4 . 10H2O
    Correct answer is option 'D'. Can you explain this answer?

    Geetika Shah answered
    Glauber's salt, common name for sodium sulfate decahydrate, Na2SO4.10H2O. It occurs as white or colorless monoclinic crystals. Upon exposure to fairly dry air, it effloresces, forming powdery anhydrous sodium sulfate.

    Chapter doubts & questions for General Principles and Processes of Isolation of Elements - Inorganic Chemistry for NEET 2025 is part of NEET exam preparation. The chapters have been prepared according to the NEET exam syllabus. The Chapter doubts & questions, notes, tests & MCQs are made for NEET 2025 Exam. Find important definitions, questions, notes, meanings, examples, exercises, MCQs and online tests here.

    Chapter doubts & questions of General Principles and Processes of Isolation of Elements - Inorganic Chemistry for NEET in English & Hindi are available as part of NEET exam. Download more important topics, notes, lectures and mock test series for NEET Exam by signing up for free.

    Inorganic Chemistry for NEET

    80 videos|112 docs|110 tests

    Top Courses NEET

    Related NEET Content

    © EduRev
    Education Revolution
    Signup to see your scores go up
    within 7 days!
    Takes less than 10 seconds to signup