All questions of Memory for Delhi Police Constable Exam

Blu-Ray Discs (BD) can store the most data among optical disc types and are commonly used for high-definition movies, games, and storing large amounts of data.

The primary disadvantage of optical discs, such as CDs and DVDs, is that they are prone to mechanical deformation, dust, and scratches due to their thin plastic material.

Primary Function of ROM (Read Only Memory) in a Computer

ROM, or Read Only Memory, is a type of computer memory that is non-volatile, meaning the data stored in it remains even when the power is turned off. The primary function of ROM in a computer is to store hardwired instructions for booting.

1. Non-Volatile Storage
- ROM retains data even when the power is turned off, making it non-volatile.
- This characteristic allows the computer to access the instructions stored in ROM every time it is powered on.

2. Hardwired Instructions
- ROM contains a set of permanent instructions or software that are permanently written during the manufacturing process.
- These instructions are known as firmware, and they provide the fundamental functions required for the computer to start up and operate.

3. Booting Process
- When a computer is powered on, it goes through a booting process where it initializes the hardware components and loads the operating system.
- The initial instructions required for this process are stored in the ROM.
- These instructions, also known as the bootstrap loader or BIOS (Basic Input/Output System), are responsible for detecting and initializing the hardware devices, such as the processor, memory, and storage, before the operating system takes control.

4. System Stability
- ROM plays a crucial role in maintaining system stability and integrity.
- Since the instructions stored in ROM are permanent and cannot be modified or erased by the user, they ensure that the computer starts up properly each time.
- This prevents unauthorized modifications to the booting process, which could potentially compromise the system's security and stability.

5. Limited Read-Only Access
- As the name suggests, ROM is read-only, meaning the stored instructions cannot be modified or overwritten by the user.
- This prevents accidental or intentional alteration of the booting instructions, ensuring the computer starts up reliably.

In conclusion, ROM's primary function in a computer is to store hardwired instructions for the booting process. Its non-volatile nature and read-only access make it an essential component for system stability and integrity.

The correct answer is option 'C) Optical Discs'.

Optical Discs are a type of storage media that use a combination of PITs (Binary Value '0') and LANDs (Binary Value '1') to store data. These discs are commonly used for long-term data storage and are known for their large storage capacity.

Below, we will discuss in detail why optical discs use a combination of PITs and LANDs for data storage:

1. Optical Discs:
- Optical discs are a type of storage medium that uses a laser to read and write data. They are made up of a flat, circular disc with a reflective surface.
- The most common types of optical discs are CD (Compact Disc), DVD (Digital Versatile Disc), and Blu-ray Disc.
- Optical discs have a high storage capacity, making them suitable for storing large amounts of data, including audio, video, and computer files.

2. Data Storage on Optical Discs:
- The reflective surface of an optical disc is divided into microscopic pits and lands.
- Pits are small depressions in the disc's surface, while lands are flat areas between the pits.
- The laser in an optical disc drive reads the data by detecting the transitions between the pits and lands.
- The presence of a pit represents a binary value '0', while the absence of a pit represents a binary value '1'.
- When the laser hits a land, it reflects back to the sensor, indicating a binary value '1'.
- However, when the laser hits a pit, it scatters, resulting in little or no reflection, indicating a binary value '0'.

3. Advantages of Using PITs and LANDs:
- The use of PITs and LANDs on optical discs provides several advantages:
- High storage capacity: The microscopic nature of PITs and LANDs allows for a large amount of data to be stored on a single disc.
- Durability: Optical discs are resistant to scratches and dust, ensuring the longevity of the stored data.
- Non-volatile storage: Optical discs retain data even when not powered, making them ideal for long-term storage.
- Read-only or rewritable: Optical discs can be either read-only (such as commercial DVDs) or rewritable (such as DVD-RW discs), providing flexibility for different data storage needs.

In conclusion, optical discs use a combination of PITs and LANDs to store data. These microscopic features represent binary values '0' and '1' respectively, allowing for high-capacity, durable, and non-volatile storage.

Secondary memory in a computer is primarily used for slow and long-term storage. It cannot be processed directly by the CPU and is typically non-volatile.

Cache memory is known for being very fast and is used to hold frequently used data, reducing the need to recompute the original data.

Primary memory, also known as main storage, is considered volatile and gets erased when the power is turned off. It includes types like RAM (Random Access Memory).

A pen drive is known for its portability, re-writability, and ease of carrying. It is a small, removable storage device that connects to a computer via USB.

The CPU cache in a computer is designed to hold frequently used data for quick access by the CPU, reducing the need to fetch data from slower memory.

A standard Compact Disc (CD) typically has a storage capacity of 760 MB, and it is commonly used for storing music and software packages.