Civil Engineering (CE) Exam > Civil Engineering (CE) Questions > A Pipeline “PQ” of diameter 500mm...
Start Learning for Free
A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.
If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2 more than that of pressure at point Q. Then calculate the rate of flow (litres per second) through the pipe?
Take friction factor to be 0.034.
Correct answer is '117-122'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A Pipeline “PQ” of diameter 500mm and length 300m carries ...
Applying Bernoulli’s equation at P and Q and take Point ‘P’ as datum:
ZP = 0[P as datum]
ZP = 0[Pasdatum]
ZQ = 20m
VP = VQ [FromContinuityequation]
PP=PQ+20×104
Q = 0.1198 m3/sec = 119.8 liters/sec
Most Upvoted Answer
A Pipeline “PQ” of diameter 500mm and length 300m carries ...
A pipeline is a system or process through which something flows or is transmitted. It is commonly used in industries such as oil and gas, water supply, and transportation.
In the context of oil and gas, a pipeline is a long-distance transportation system that is used to transport crude oil, natural gas, or petroleum products from production fields to refineries or distribution points. These pipelines are typically made of steel and are buried underground or laid on the seabed.
Water supply pipelines are used to transport water from a source, such as a reservoir or treatment plant, to various locations for drinking, irrigation, or industrial use. These pipelines can be made of various materials, including concrete, steel, or plastic.
Transportation pipelines are used to transport various fluids or gases, such as petroleum products, chemicals, or natural gas, over long distances. These pipelines are crucial for the efficient and safe transportation of these materials, reducing the need for other modes of transportation, such as trucks or ships.
Pipelines are usually equipped with pumps or compressors at regular intervals to maintain the flow and pressure of the transported material. They also have various safety features, such as pressure relief valves, leak detection systems, and emergency shutdown systems, to ensure the safe operation of the pipeline.
Overall, pipelines play a vital role in the efficient and reliable transportation of fluids and gases, contributing to the functioning of various industries and the overall economy.
In the context of oil and gas, a pipeline is a long-distance transportation system that is used to transport crude oil, natural gas, or petroleum products from production fields to refineries or distribution points. These pipelines are typically made of steel and are buried underground or laid on the seabed.
Water supply pipelines are used to transport water from a source, such as a reservoir or treatment plant, to various locations for drinking, irrigation, or industrial use. These pipelines can be made of various materials, including concrete, steel, or plastic.
Transportation pipelines are used to transport various fluids or gases, such as petroleum products, chemicals, or natural gas, over long distances. These pipelines are crucial for the efficient and safe transportation of these materials, reducing the need for other modes of transportation, such as trucks or ships.
Pipelines are usually equipped with pumps or compressors at regular intervals to maintain the flow and pressure of the transported material. They also have various safety features, such as pressure relief valves, leak detection systems, and emergency shutdown systems, to ensure the safe operation of the pipeline.
Overall, pipelines play a vital role in the efficient and reliable transportation of fluids and gases, contributing to the functioning of various industries and the overall economy.
Attention Civil Engineering (CE) Students!
To make sure you are not studying endlessly, EduRev has designed Civil Engineering (CE) study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Civil Engineering (CE).
|
Explore Courses for Civil Engineering (CE) exam
|
|
Top Courses for Civil Engineering (CE)View all
A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer?
Question Description
A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer?.
A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer?.
Solutions for A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? in English & in Hindi are available as part of our courses for Civil Engineering (CE).
Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free.
Here you can find the meaning of A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer?, a detailed solution for A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? has been provided alongside types of A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A Pipeline “PQ” of diameter 500mm and length 300m carries water as shown in figure below. The flow is occurring from P to Q.If the point Q is 20 metres above point P and the pressure at point ‘P’ is 20 N/cm2more than that of pressure at point Q. Then calculate the rate of flow(litres per second) through the pipe?Take friction factor to be 0.034.Correct answer is '117-122'. Can you explain this answer? tests, examples and also practice Civil Engineering (CE) tests.
|
|
Explore Courses for Civil Engineering (CE) exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup