Civil Engineering (CE) Exam > Civil Engineering (CE) Questions > The maximum pitch for rivets or welds in tens...
Start Learning for Free
The maximum pitch for rivets or welds in tension zone are:
- a)16t or 200 mm whichever is less
- b)12t or 200 mm whichever is less
- c)16t or 200 mm whichever is more
- d)12t or 200 mm whichever is more
Correct answer is option 'A'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
The maximum pitch for rivets or welds in tension zone are:a)16t or 200...
Maximum pitch for rivets or welds in tension zone are 16t or 200 mm whichever is less as per IS 800: 1984 but for rivets in compression zone it is 12t or 200 mm whichever is less.
Most Upvoted Answer
The maximum pitch for rivets or welds in tension zone are:a)16t or 200...
Maximum Pitch for Rivets or Welds in Tension Zone
The maximum pitch for rivets or welds in tension zone is determined by the following factors:
- The thickness of the plates being joined
- The strength of the material being used
- The load that will be applied to the joint
The correct answer to the question is option 'A', which states that the maximum pitch for rivets or welds in tension zone is 16t or 200 mm, whichever is less.
Explanation
The maximum pitch for rivets or welds in tension zone is determined by the formula:
Pmax = min {16t, 200 mm}
Where,
Pmax = maximum pitch for rivets or welds in tension zone
t = thickness of the thinnest plate being joined
The value of 16t or 200 mm, whichever is less, is used to ensure that the joint is strong enough to resist the applied load. If the pitch is too large, the joint may fail due to shear or bearing stresses. If the pitch is too small, it may lead to excessive deformation or distortion of the plates.
The value of 16t or 200 mm, whichever is less, is also used to ensure that the joint is economical. If the pitch is too small, it may require more rivets or welds, which would increase the cost of the joint. If the pitch is too large, it may require larger rivets or welds, which would also increase the cost of the joint.
Conclusion
In conclusion, the maximum pitch for rivets or welds in tension zone is determined by the thickness of the plates being joined, the strength of the material being used, and the load that will be applied to the joint. The correct answer to the question is option 'A', which states that the maximum pitch for rivets or welds in tension zone is 16t or 200 mm, whichever is less.
The maximum pitch for rivets or welds in tension zone is determined by the following factors:
- The thickness of the plates being joined
- The strength of the material being used
- The load that will be applied to the joint
The correct answer to the question is option 'A', which states that the maximum pitch for rivets or welds in tension zone is 16t or 200 mm, whichever is less.
Explanation
The maximum pitch for rivets or welds in tension zone is determined by the formula:
Pmax = min {16t, 200 mm}
Where,
Pmax = maximum pitch for rivets or welds in tension zone
t = thickness of the thinnest plate being joined
The value of 16t or 200 mm, whichever is less, is used to ensure that the joint is strong enough to resist the applied load. If the pitch is too large, the joint may fail due to shear or bearing stresses. If the pitch is too small, it may lead to excessive deformation or distortion of the plates.
The value of 16t or 200 mm, whichever is less, is also used to ensure that the joint is economical. If the pitch is too small, it may require more rivets or welds, which would increase the cost of the joint. If the pitch is too large, it may require larger rivets or welds, which would also increase the cost of the joint.
Conclusion
In conclusion, the maximum pitch for rivets or welds in tension zone is determined by the thickness of the plates being joined, the strength of the material being used, and the load that will be applied to the joint. The correct answer to the question is option 'A', which states that the maximum pitch for rivets or welds in tension zone is 16t or 200 mm, whichever is less.
Attention Civil Engineering (CE) Students!
To make sure you are not studying endlessly, EduRev has designed Civil Engineering (CE) study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Civil Engineering (CE).
|
Explore Courses for Civil Engineering (CE) exam
|
|
Similar Civil Engineering (CE) Doubts
Top Courses for Civil Engineering (CE)View all
The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer?
Question Description
The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer?.
The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer?.
Solutions for The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? in English & in Hindi are available as part of our courses for Civil Engineering (CE).
Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free.
Here you can find the meaning of The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer?, a detailed solution for The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? has been provided alongside types of The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice The maximum pitch for rivets or welds in tension zone are:a)16t or 200 mm whichever is lessb)12t or 200 mm whichever is lessc)16t or 200 mm whichever is mored)12t or 200 mm whichever is moreCorrect answer is option 'A'. Can you explain this answer? tests, examples and also practice Civil Engineering (CE) tests.
|
|
Explore Courses for Civil Engineering (CE) exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup