Question Description
Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer?.

Solutions for Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? in English & in Hindi are available as part of our courses for Civil Engineering (CE). Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free.

Here you can find the meaning of Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer?, a detailed solution for Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? has been provided alongside types of Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice Two beams PQ (fixed at P and with a roller support at Q, as shown in Figure I, which allows vertical movement) and XZ (with a hinge at Y) are shown in the Figures I and II respectively. The spans of PQ and XZ are L and 2L respectively. Both the beams are under the action of uniformly distributed load (W) and have the same flexural stiffness, EI (where, E and I respectively denote modulus of elasticity and moment of inertia about axis of bending). Let the maximum deflection and maximum rotation be δmax1 and θmax1, respectively, in the case of beam PQ and the corresponding quantities for the beam XZ be δmax2 and θmax2, respectively.Which one of the following relationships is true?a)δmax1 ≠ δmax2 and θmax1 ≠ θmax2b)δmax1 = δmax2 and θmax1 ≠ θmax2c)δmax1 ≠ δmax2 and θmax1 = θmax2d)δmax1 = δmax2 and θmax1 = θmax2Correct answer is option 'D'. Can you explain this answer? tests, examples and also practice Civil Engineering (CE) tests.