JEE Exam > JEE Questions > A cylindrical capillary tube of 0.2 mm radius...
Start Learning for Free
A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in water in two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?
(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)
(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)
- a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.
- b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)
- c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)
- d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)
Correct answer is option 'A,C,D'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
A cylindrical capillary tube of 0.2 mm radius is made by joining two c...
⇒ h1 = 75 mm (in T1) [If we assume entire tube of T1]
⇒
mm (in T2) [If we assume entire tube of T2]Option (1): Since contact angles are different so correction in the height of water column raised in the tube will be different in both the cases, so option (1) is correct
Option (2): If joint is 5 cm is above water surface, then let's say water crosses the joint by height h, then:
⇒ h = –ve, not possible, so liquid will not cross the interface, but angle of contact at the interface will change, to balance the pressure,
So option (2) is wrong.
Option (3): If interface is 8 cm above water then water will not even reach the interface, and water will rise till 7.5 cm only in T1, so option (3) is right.
Option (4): If interface is 5 cm above the water in vessel, then water in capillary will not even reach the interface. Water will reach only till 3.75 cm, so option (4) is right.
|
Explore Courses for JEE exam
|
|
Similar JEE Doubts
Top Courses for JEEView all
A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer?
Question Description
A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? for JEE 2024 is part of JEE preparation. The Question and answers have been prepared according to the JEE exam syllabus. Information about A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? covers all topics & solutions for JEE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer?.
A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? for JEE 2024 is part of JEE preparation. The Question and answers have been prepared according to the JEE exam syllabus. Information about A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? covers all topics & solutions for JEE 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer?.
Solutions for A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? in English & in Hindi are available as part of our courses for JEE.
Download more important topics, notes, lectures and mock test series for JEE Exam by signing up for free.
Here you can find the meaning of A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer?, a detailed solution for A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? has been provided alongside types of A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice A cylindrical capillary tube of 0.2 mm radius is made by joining two capillaries T1 and T2 of different materials having water contact angles of 0° and 60°, respectively. The capillary tube is dipped vertically in waterin two different configurations, case I and II as shown in figure. Which of the following option(s) is(are) correct?(Surface tension of water = 0.075 N/m, density of water = 1000 kg/m3, take g = 10 m/s2)a)The correction in the height of water column raised in the tube, due to weight of water contained in the meniscus, will be different for both cases.b)For case I, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be more than 8.75 cm. (Neglect the weight of the water in the meniscus)c)For case I, if the joint is kept at 8 cm above the water surface, the height of water column in the tube will be 7.5 cm. (Neglect the weight of the water in the meniscus)d)For case II, if the capillary joint is 5 cm above the water surface, the height of water column raised in the tube will be 3.75 cm. (Neglect the weight of the water in the meniscus)Correct answer is option 'A,C,D'. Can you explain this answer? tests, examples and also practice JEE tests.
|
|
Explore Courses for JEE exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup