Civil Engineering (CE) Exam > Civil Engineering (CE) Questions > Water at 10°C flows from a large reservoir ...
Start Learning for Free
Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.
The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.
Correct answer is 'Range: 31 to 33'. Can you explain this answer?
| FREE This question is part of | Download PDF Attempt this Test |
Verified Answer
Water at 10°C flows from a large reservoir to a smaller one through ...
The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s.
View all questions of this test
The piping system involves 89 m of piping, a sharp-edged entrance (KL = 0.5), two standard flanged elbows (KL = 0.3 each), a fully open gate valve (KL = 0.2), and a submerged exit (KL = 1.06). We choose points 1 and 2 at the free surfaces of the two reservoirs. Noting that the fluid at both points is open to the atmosphere (and thus p1 = p2 = patm ) and that the fluid velocities at both points are zero (V1 = V2 = 0), the energy equation for a control volume between these two points simplifies to
Since the diameter of the piping system is constant. The average velocity in the pipe and the Reynolds number are
Therefore, the free surface of the first reservoir must be 31.9 m above the ground level to ensure water flow between the two reservoirs at the specified rate.
Most Upvoted Answer
Water at 10°C flows from a large reservoir to a smaller one through ...
The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s.
The piping system involves 89 m of piping, a sharp-edged entrance (KL = 0.5), two standard flanged elbows (KL = 0.3 each), a fully open gate valve (KL = 0.2), and a submerged exit (KL = 1.06). We choose points 1 and 2 at the free surfaces of the two reservoirs. Noting that the fluid at both points is open to the atmosphere (and thus p1 = p2 = patm ) and that the fluid velocities at both points are zero (V1 = V2 = 0), the energy equation for a control volume between these two points simplifies to
Since the diameter of the piping system is constant. The average velocity in the pipe and the Reynolds number are
Therefore, the free surface of the first reservoir must be 31.9 m above the ground level to ensure water flow between the two reservoirs at the specified rate.
Free Test
| FREE | Start Free Test |
Community Answer
Water at 10°C flows from a large reservoir to a smaller one through ...
The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s.
The piping system involves 89 m of piping, a sharp-edged entrance (KL = 0.5), two standard flanged elbows (KL = 0.3 each), a fully open gate valve (KL = 0.2), and a submerged exit (KL = 1.06). We choose points 1 and 2 at the free surfaces of the two reservoirs. Noting that the fluid at both points is open to the atmosphere (and thus p1 = p2 = patm ) and that the fluid velocities at both points are zero (V1 = V2 = 0), the energy equation for a control volume between these two points simplifies to
Since the diameter of the piping system is constant. The average velocity in the pipe and the Reynolds number are
Therefore, the free surface of the first reservoir must be 31.9 m above the ground level to ensure water flow between the two reservoirs at the specified rate.
Attention Civil Engineering (CE) Students!
To make sure you are not studying endlessly, EduRev has designed Civil Engineering (CE) study material, with Structured Courses, Videos, & Test Series. Plus get personalized analysis, doubt solving and improvement plans to achieve a great score in Civil Engineering (CE).
|
Explore Courses for Civil Engineering (CE) exam
|
|
Similar Civil Engineering (CE) Doubts
Top Courses for Civil Engineering (CE)View all
Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer?
Question Description
Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer?.
Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? for Civil Engineering (CE) 2024 is part of Civil Engineering (CE) preparation. The Question and answers have been prepared according to the Civil Engineering (CE) exam syllabus. Information about Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? covers all topics & solutions for Civil Engineering (CE) 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer?.
Solutions for Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? in English & in Hindi are available as part of our courses for Civil Engineering (CE).
Download more important topics, notes, lectures and mock test series for Civil Engineering (CE) Exam by signing up for free.
Here you can find the meaning of Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of
Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer?, a detailed solution for Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? has been provided alongside types of Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? theory, EduRev gives you an
ample number of questions to practice Water at 10°C flows from a large reservoir to a smaller one through a 5-cm-diameter cast iron piping system, as shown in Fig. Determine the elevation z1 (in m) for a flow rate of 6 L/s.The density and dynamic viscosity of water at 10° C are ρ = 999.7 kg⁄m3 and μ = 1.307 × 10−3 kg⁄m ∙ s. The coefficient of friction = 0.0315.Correct answer is 'Range: 31 to 33'. Can you explain this answer? tests, examples and also practice Civil Engineering (CE) tests.
|
|
Explore Courses for Civil Engineering (CE) exam
|
|
Suggested Free Tests
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup