Banking Exams Exam  >  Banking Exams Questions  >   Directions: Read the following passage caref... Start Learning for Free
Directions: Read the following passage carefully and answer the questions given below.
History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.
The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.
While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.
Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?
  • a)
    This is validated by that fact iron and steel export formed a large percentage of total Indian exports.
  • b)
    This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.
  • c)
    This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.
  • d)
    This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.
  • e)
    None of these
Correct answer is option 'D'. Can you explain this answer?
Most Upvoted Answer
Directions: Read the following passage carefully and answer the quest...
In the lines "The iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.", we can clearly see that the quality of Iron was outstanding which proves that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'
Hence, the correct option is (D).
Free Test
Community Answer
Directions: Read the following passage carefully and answer the quest...
Validation of India's Advanced Iron and Steel Industry
The statement regarding the advanced state of India's Iron and Steel industry is validated by several factors, but the most compelling evidence is the enduring presence of the iron column near Qutab Minar in Delhi.
Key Evidence:
- Historical Significance:
The iron column is over 1,500 years old, showcasing the skill and ingenuity of ancient Indian metallurgists. Its resistance to weathering, despite being exposed to the elements for centuries, speaks volumes about the quality of iron produced in ancient India.
- Longevity and Durability:
The fact that this column remains "fresh" and structurally sound after such a long period indicates advanced techniques in forging and fabricating that were employed by artisans of that era. This contrasts sharply with the materials used in contemporary times, underscoring the exceptional craftsmanship.
- Testament to Ingenuity:
The enduring nature of the iron column serves as a testament not only to the materials used but also to the methods of production. Such durability suggests a sophisticated understanding of metallurgy that was advanced for its time.
In conclusion, while other options may hint at the reputation of Indian steel or its use in ships, the iron column's existence serves as a direct and tangible proof of the advanced state of India's Iron and Steel industry. It encapsulates centuries of technological advancement and artistry that contributed to India's industrial heritage.
Explore Courses for Banking Exams exam
Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer?
Question Description
Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? for Banking Exams 2024 is part of Banking Exams preparation. The Question and answers have been prepared according to the Banking Exams exam syllabus. Information about Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? covers all topics & solutions for Banking Exams 2024 Exam. Find important definitions, questions, meanings, examples, exercises and tests below for Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer?.
Solutions for Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? in English & in Hindi are available as part of our courses for Banking Exams. Download more important topics, notes, lectures and mock test series for Banking Exams Exam by signing up for free.
Here you can find the meaning of Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? defined & explained in the simplest way possible. Besides giving the explanation of Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer?, a detailed solution for Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? has been provided alongside types of Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? theory, EduRev gives you an ample number of questions to practice Directions: Read the following passage carefully and answer the questions given below.History of Industry in India dates back to the history of mankind. India’s handicrafts manufactured in village huts and houses all over the country were prized in foreign countries. Working on the locally available raw materials and with the skills and tools handed over to them by their forefathers, the village artisans produced products of high aesthetic quality with ease and efficiency. Generations of such workers provided India with a long and glorious tradition of artistic handicrafts of a varied nature. Among all the industries of early times, the textiles, especially the cotton textile industry, had the place of pride both in India and in the outside world. There is enough evidence to show that the Indians knew weaving some 1,500 years before Christ, when the Europeans were still covering themselves with animal skins. Pyrard, the 17th century Portuguese writer has recorded that everyone from the Cape of Good Hope to China was clothed from head to foot in Indian made garments. The fine Dhaka muslin was the envy of the world for centuries together. Iron and Steel industry was also in advanced stage at that time. The iron column near Qutab Minar in Delhi is standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity. This rare monument is a testimony to the forging and fabricating ingenuity of ancient India. It is believed that the famous Damascus swords were made from steel imported from India. In addition to cotton textiles and steel industries; wood, stone and ivory carvings, silk textiles, pottery, bronze, brass, silver and copper works, dyeing and calico printing were also famous throughout the world. Industrial Revolution in Europe resulted in modern factories. With this the scale of manufacturing goods increased tremendously leading to mechanisation. As a result migration of workers occurred from villages to cities. The barter system of goods with goods came to an end, exchange of goods with money started. It is correct that a revolution occurred in the manufacturing sphere but the traditional village handicrafts and cottage industries witnessed their death toll. Thousands of artisans were rendered jobless as their manufacturers could not compete with the fine and low cost goods manufactured in modern industries. A near chaos prevailed in villages. Goldsmiths, blacksmiths and weavers began to starve. Thus, modern industry eroded the strong traditional industrial base.The decline of the traditional industry and the rise of the modern industry in India were neither simultaneous nor casually connected. The beginning of modern large scale industry in India dates back to 1830 when the first charcoal fired iron making was attempted in Tamil Nadu. However, this venture collapsed in 1866. Therefore, the real beginning of the modern industry in India is recognised with the establishment of cotton textile industry at Mumbai in 1854. This industry grew tremendously in 1870s due to a spurt in demand in the wake of the American Civil War. By 1875-76, the number of cotton textile mills rose to 47. The first jute mill was set up at Rishra near Kolkata in 1855. Since the geographical conditions were very much favourable for jute industry in the Hugli basin, this industry flourished well and there were 64 mills in 1913-14, providing employment to over two lakh persons. Among the other industries which appeared on the industrial scene of India before the outbreak of World War I in 1914 were woollen textiles, paper and breweries. The main industrial centres were port cities of Mumbai, Kolkata and Chennai. This pattern of industrial location was conceived by the British rulers to facilitate imports and exports. The sole inland industrial centre of any consequence was Kanpur, the base of military equipment production. Indian industries made rapid strides during the First World War (1914-18) due to rise in demand for industrial goods by the Armed Forces. However, the real spurt was provided by the Indian Fiscal Commission set up in 1921-22. This gave the much needed protection to industries like iron and steel, textiles, cement, sugar, paper and metals. One of the most prominent features of Indian industrial scene during this period was the dispersal of cotton textile industry away from Mumbai. In 1875-76, 61.7 per cent of cotton textile mills were located in Mumbai and by 1938-39 only 17.5% per cent of the mills remained in Mumbai. In fact this industry gained a lot as a result of war. On the eve of the war, India had emerged as the fourth largest cotton manufacturing country next to the USA, the U.K. and Japan in that order. Jute industry on the other hand, continued to concentrate in the Hugli basin only. However, the number of jute mills rose from 64 in 1913-14 to 107 in 1938-39.While Indian industry prospered during World War I, the Second World War created problems for Indian industry. India became an active participant in war and the entry of Japan in the hostilities brought war to India’s doorstep. However, the impact of war was short-lived and the industry was quick to recover from the initial shock and exploited the opportunities offered by the war.A programme costing Rs. 4 crore for the manufacture of armaments and explosives was launched in 1941 to meet the immediate requirements of war. The ordinance factories started producing 700 varieties of ammunition. There were pressing demands to meet the civilian requirements too. With this object in view, heavy chemical industry was started in 1941 and the production of sulphuric acid, synthetic ammonia, caustic soda, chlorine and bleaching powder commenced. The Hindustan Aircraft Company also assembled its first aircraft in 1941. Metal fabricating industries such as copper were also initiated. A wide variety of engineering industries like machine tools, machinery manufacture in respect of cotton, tea, and oil processing industries, electrical equipment, vanaspati manufacturing, power, alcohol, synthetic resin and plastic industries also flourished. However, some other industries including diesel engines, pumps, sewing machines and electric fans suffered a setback. By and large, the performance of individual industries varied considerably.Q. What validates the statement that 'not only clothing, India's Iron and Steel industry was also in advanced stage at that time'?a)This is validated by that fact iron and steel export formed a large percentage of total Indian exports.b)This can be inferred from the fact that India's steel was famous from Cape of Good Hope to China.c)This is validated by the fact that Indian merchant ships were built with iron and steel whereas the Europeans used wooden ones.d)This is validated by the iron column near Qutab Minar in Delhi, standing in the open and is exposed to sun, rain and weathering over 1,500 years old and it still looks fresh. It seems that this column will continue to stand there till eternity.e)None of theseCorrect answer is option 'D'. Can you explain this answer? tests, examples and also practice Banking Exams tests.
Explore Courses for Banking Exams exam

Top Courses for Banking Exams

Explore Courses
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev