Civil Engineering (CE) Exam  >  Civil Engineering (CE) Notes  >  Engineering Mechanics  >  International System of Units

International System of Units | Engineering Mechanics - Civil Engineering (CE) PDF Download

U.S. Customary Units:The U.S. customary, or British system of units, also called the footpound-second (FPS) system, has been the common system in business and industry in English-speaking countries. Although this system will in time be replaced by SI units, for many more years engineers must be able to work with both SI units and FPS units, and both systems are used freely in Engineering Mechanics. As shown in the table, in the U.S. or FPS system, the units of feet (ft) for length, seconds (sec) for time, and pounds (lb) for force are selected as base units, and the slug for mass is derived from Eq. 1/1. Thus, force (lb) = mass (slugs) * acceleration (ft/sec2), or

slug = lb-sec2 / ft

Therefore, 1 slug is the mass which is given an acceleration of 1 ft/sec2 when acted on by a force of 1 lb. If W is the gravitational force or weight and g is the acceleration due to gravity, Eq. 1/1 gives

m (slugs)=W (lb)/ g (ft/sec2)

Note that seconds is abbreviated as s in SI units, and as sec in FPS units.

In U.S. units the pound is also used on occasion as a unit of mass, especially to specify thermal properties of liquids and gases. When distinction between the two units is necessary, the force unit is frequently written as lbf and the mass unit as lbm. In this book we use almost exclusively the force unit, which is written simply as lb. Other common units of force in the U.S. system are the kilopound (kip), which equals 1000 lb, and the ton, which equals 2000 lb.

The International System of Units (SI) is termed an absolute system because the measurement of the base quantity mass is independent of its environment. On the other hand, the U.S. system (FPS) is termed a gravitational system because its base quantity force is defined as the gravitational attraction (weight) acting on a standard mass under specified conditions (sea level and 45 degree latitude). A standard pound is also the force required to give a one-pound mass an acceleration of 32.1740 ft/sec2.

In SI units the kilogram is used exclusively as a unit of mass—never force. In the MKS (meter, kilogram, second) gravitational system, which has been used for many years in non-English-speaking countries, the kilogram, like the pound, has been used both as a unit of force and as a unit of mass.

The document International System of Units | Engineering Mechanics - Civil Engineering (CE) is a part of the Civil Engineering (CE) Course Engineering Mechanics.
All you need of Civil Engineering (CE) at this link: Civil Engineering (CE)
24 videos|59 docs|53 tests

Top Courses for Civil Engineering (CE)

FAQs on International System of Units - Engineering Mechanics - Civil Engineering (CE)

1. What is the International System of Units (SI)?
Ans. The International System of Units (SI) is an internationally recognized system of measurement that is used across the globe. It provides a standard set of units for measuring quantities such as length, mass, time, temperature, electric current, and more. The SI system ensures consistency and uniformity in measurements, enabling scientists, engineers, and people from various fields to communicate and collaborate effectively.
2. How is the International System of Units different from other measurement systems?
Ans. The International System of Units (SI) differs from other measurement systems in its use of base units and prefixes. SI uses a set of seven base units, including the meter for length, kilogram for mass, second for time, ampere for electric current, kelvin for temperature, mole for amount of substance, and candela for luminous intensity. It also incorporates a decimal-based system of prefixes, such as kilo-, mega-, and milli-, to express multiples or fractions of the base units.
3. Why is the International System of Units important?
Ans. The International System of Units (SI) is crucial for scientific research, international trade, and everyday life. It provides a standardized and universally understood language for measurement, ensuring accuracy, precision, and consistency in various fields. The SI system allows for seamless communication and comparison of measurements, facilitating global collaboration and progress in science, technology, and commerce.
4. How is the International System of Units maintained and updated?
Ans. The International System of Units (SI) is maintained and updated by the International Bureau of Weights and Measures (BIPM). The BIPM is responsible for ensuring the accuracy and traceability of measurement standards worldwide. It periodically convenes the General Conference on Weights and Measures (CGPM) to discuss and make decisions on the system's evolution. The CGPM approves any changes or additions to the SI, based on recommendations from the International Committee for Weights and Measures (CIPM) and input from the global scientific community.
5. Are there any countries that do not use the International System of Units?
Ans. While the majority of countries around the world use the International System of Units (SI) as their primary measurement system, there are a few exceptions. Some countries, such as the United States, Liberia, and Myanmar, still use non-SI units for certain applications, particularly in daily life and customary practices. However, even in these countries, the SI system is widely used in scientific research, international trade, and industries that require international standardization. Efforts are ongoing to promote the adoption of SI units globally.
24 videos|59 docs|53 tests
Download as PDF
Explore Courses for Civil Engineering (CE) exam

Top Courses for Civil Engineering (CE)

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Objective type Questions

,

International System of Units | Engineering Mechanics - Civil Engineering (CE)

,

Extra Questions

,

International System of Units | Engineering Mechanics - Civil Engineering (CE)

,

Exam

,

Sample Paper

,

ppt

,

shortcuts and tricks

,

study material

,

Semester Notes

,

Viva Questions

,

Free

,

Summary

,

video lectures

,

practice quizzes

,

past year papers

,

International System of Units | Engineering Mechanics - Civil Engineering (CE)

,

mock tests for examination

,

Important questions

,

MCQs

,

pdf

,

Previous Year Questions with Solutions

;