JEE Exam  >  JEE Notes  >  Chemistry for JEE Main & Advanced  >  Overview of Polymers: Addition & Polymerization

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced PDF Download

POLYMERS AND POLYMERIZATION:

Macromolecules, both natural and man-made, own their great size to the fact they are polymers (Greek: many parts); that is, each one is made up of a large number of simpler units - identical to each other or at least chemically similar - joined together in a regular way. They are formed by a process we touched on earlier: polymerization. The joining together of many small molecules to form very large molecules. The simple compounds from which polymers are made are called monomers.

Petides and Proteins:

In the last section, you studied the polymers of monosaccharides which act as structural components in plants and serve as energy storage in animals. In this section, you will study another kind of natural polymers called peptides and proteins.

Peptides are biologically important polymers in which 2-amino acids are joined by the amide linkages, formed by the reaction of the carboxy group of one amino acid with the amino group of another amino acid. These amide linkages are also called peptide bonds. The general structure of a peptide is shown below:

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Peptides can be classified as dipeptides, tripeptides and tetrapeptides, depending on whether the number of amino acids are two, three or four, respectively. Peptides containing upto 50 amino acids are called polypeptides. Bradykinin is an important naturally occurring nonapeptide which is present in blood plasma and is involved in the regulation of blood pressure.

Bradykinin:

Arg—Pro — Pro — Gly — Phe — Ser — Pro — Phe — Arg


Configuration of proteins :

(a) Biological nature or function of protein was confirmed by its conformation.

(b) This conformation is of 4 types:

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Primary Structure :

This type of structure was given by Friedrich Sanger in 1953 in Insulin (of one chain).

  • Primary structure is conformed by a single polypeptide chain in a linear manner.
  • All amino acids are attached in a straight chain by peptide bond.
  • No biological importance & soon changed to other forms.

Secondary Structure :

  • In it, structure of straight chain from irregular changes to form coils.
  • H-bond peptide bond present in secondary structure.
  • This H bond is present between hydrogen of Amino group and oxygen atom of carboxylic acid group.
  • This structure is of two types:

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced 

(i) α-helix

  • Chain is spiral.
  • 3.7 atoms in one coiling.
  • Right handed circular.

Eg. Myosin, Keratin etc.

(ii) β-pleated sheet

  • Structure of protein is not arranged in a sequence.
  • Polypeptide chain are parallel to each other.
  • H - bond form by near chains.

Eg. Silk fibres.

Tertiary structure :

In this structure of protein, atoms are highly coiled and form a spherical form

Ex. Albumin

This structure is formed by 4 regular hydrogen bonds which makes a regularity in it.

(i) Hydrogen bond :

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced = O …….. H -  Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Hydrogen bond

They are formed between oxygen of acidic amino acid and H of basic amino acid.

(ii) Hydrophobic bond -

  • Non - polar side chains of neutral amino acid tends to be closely associated with one another in proteins.
  • Present in between the amino Acid.
  • These are not true bonds.

(iii) lonic bond :

-COO_.....H3  +N-

Ionic bond

These are salt bonds formed between oppositely charged groups in side chains of Amino acids.

Eg. Aspartic acid

Glutamic acid

(iv) Disulphide bonds :

| ——— S - S —— |

  • Relatively stable bond and thus is not broken readily under usual conditions of denaturation.
  • Formed between the -SH group of Amino acid Ex. Cystine and Methionine .

Quaternary structure :

  • When 2 or more polypeptide chains are united by forces other than covalent bonds (i.e. not peptide and disulphide bonds) are called Quaternary structure.
  • It is most stable structure.

Ex. Haemoglobin

Types of proteins:

Classification of protein is based upon three general properties shape, Solubility and Chemical composition.

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Simple proteins-

It is formed of only Amino Acids.

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

(A) Fibrous :

  • It is insoluble
  • It is of elongated shape.
  • It is highly resistant to digestion by proteolytic enzymes.
  • Their main function - Protection.

Ex. Collagen, Keratin etc.

(B) Globular :

  • These are spherical and oval in shape. Chains are highly coiled.
  • These are soluble.

Ex. Albumin.

Conjugated Proteins:

  • These are complex proteins in which protein molecule is combined with characteristic non-amino acid substance.
  • Non-amino acid or Non - Protein part is called as prosthetic group.

Ex. Nucleoproteins.

(Protein Nucleic acid), Phosphoproteins (Protein (PO3)2-).

Eg.  Casein of milk., Vitelline of egg - yolk.

Derived proteins :

(a) These are obtained as a result of partial hydrolysis of natural proteins.

Eg.   Proteose, Metaproteins, Peptones

(b) Denaturation of Proteins

When a protein in its native form, is subjected to a physical change like change in temperature, or a chemical change like change in pH, the native conformation of the molecule is disrupted and proteins so formed are called denaturated proteins.

The denaturation may be reversible or irreversible. The coagulation of egg on boiling is an example of irreversible protein denaturation.

However, it has been shown now that in some cases, the process is actually reversible. The reverse process is called renaturation.

Test of Protein :

(a) With conc. HNO3 on heating give yellow ppt. which on more heating gives solution on adding NH4OH. Red colour appears. It is Xanthoprotic test.

(b) Dil. CuSO4 protein give Blue violet colour. It is a Biuret test.

(c) Millon reaction: Proteins on adding Millon's reagent (a solution of mercuric and mercurous nitrates in nitric acid containing a little nitrous acid) followed by heating the solution gives red precipitate or colour.

(d) Ninhydrin reaction. Proteins, peptides and α-amino acids give a characteristic blue colour on treatment with ninhydrin.

Biological Importance of protein :

(a) Component of plasma membrane.

(b) All enzymes are proteins.

(c) Many hormones are proteins.

(d) Antigen and antibodies are protein.

(e) Actin and myosin proteins are important in muscle contraction.

(f) Proteins are important in growth, regeneration and repairing.

(g) Calorific value- 4.0 kcal.

Lipids

(a) 'Lipid' word is derived from Greek word lipos which means fat.

(b) Lipids are heterogeneous group of substances which have common property of being relatively insoluble in water and soluble in non-polar solvents such as ether, Chloroform etc.

(c) Form 3-5% part of protoplasm.

(d) H2O ≠ 2 : 1 (different from water)

(e) Ratio of oxygen is less.

(f) Specific gravity < 1

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Simple lipid :

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Triglycerides

(a) These are esters of fatty acids with glycerol.

Ester bond is present.

(b) Synthesis is of following type-

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

(c) Fatty acids which occur in natural fats usually contain an even number of carbon atoms(4 to 30) in straight chains.

(d) Simplest fatty acid HCOOH.

(e) More complex fatty acid are formed by successive addition of -CH2 groups.

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

(i) Saturated :

⇒ Only single bond is present in them.

⇒ First member is CH3COOH.

Other examples :

⇒ Palmitic acid - C15H31COOH

→ CH3(CH2)14 COOH

⇒ Stearic acid - C17H35COOH

→ CH3(CH2)16COOH

⇒ Palmitic and stearic acid is found in fats of animals in less amount.

⇒ These are solid and are found in fats.

(ii) Unsaturated :

⇒ Double bond is present in these fatty acid chains.

⇒ These are liquids at room temperature. Found in Oils.

⇒ These are of two types:

Monounsaturated - 1 Double bond is present.

Eg. Oleic acid.

⇒ Oleic acid is present in more amount in nature.

Polyunsaturated - More than two double bonds

Eg. Linoleic acid with two double bonds.

Linoleinic acid with three double bonds.

Arachidonic acid with four double bonds (Groundnut).

Wax :

⇒ These are esters of other alcohols of high

molecular weight instead of glycerols.

⇒These are insoluble in water.

⇒ These are monohydric alcohols.

⇒ Some examples of waxes -

Myricye palmitate (Honeybee wax) Cetyl palmitate (Dolphin and whale wax)

Cerumen (ear wax)

Compound Lipid- Are of 4 types :

(a) Phospholipids. (b) Glycolipids.

Phospholipids :

Phosphorous is present.

ex. cell wall

Glycolipids:

⇒ Lipid Sugar = Glycolipids

⇒ Present in brain, Adrenal glands, kidney, WBC liver, thymus, Spleen, Lungs, egg yolk.

⇒ Glycolipids = 2 Fatty acid 1 sphinocine 1 galactose.

Derived lipids:

⇒ By hydrolysis of fats, they are obtained.

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

Steroids :

⇒ These are different from other fats.

⇒ It is insoluble in water.

(i) Bile acids :

⇒ Present in secretion of liver.

(ii) Sex hormones :

⇒ These are androsterones.

(iii) Adrenal hormone- Eg : Aldosterone

Sterols :

⇒ They have -OH groups.

⇒ They are complex monohydroxy alcohols.

(i) Cholesterol - It is widely distributed in all cells of body.

Biological importance of Fats :

⇒ It is source of energy.

⇒ It is important for absorption of vitamin A, D, E and K.

⇒ It is important component of plasma membrane.

⇒ It act as shock absorber of body.

⇒ Calorific value: 9.3 kcal.

The document Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced is a part of the JEE Course Chemistry for JEE Main & Advanced.
All you need of JEE at this link: JEE
352 videos|596 docs|309 tests

Top Courses for JEE

FAQs on Overview of Polymers: Addition & Polymerization - Chemistry for JEE Main & Advanced

1. What is polymerization in relation to polymers?
Ans. Polymerization is the process by which small molecules, called monomers, react and join together to form long chains or networks called polymers. This reaction occurs through the breaking of certain chemical bonds in the monomers and the formation of new bonds between them.
2. What are addition polymers?
Ans. Addition polymers are a type of polymer formed through addition polymerization, where monomers with double bonds react with each other to form long chains. This process does not involve the removal of any small molecules, such as water or any other byproduct.
3. How is addition polymerization initiated?
Ans. Addition polymerization can be initiated through various methods, such as heat, light, or the use of catalysts. Heat can provide enough energy to break the double bonds in the monomers, allowing them to react and form polymers. Light, particularly ultraviolet light, can also initiate the reaction by providing the necessary energy. Catalysts, such as peroxides, can accelerate the reaction by providing an alternative reaction pathway with lower activation energy.
4. What are the advantages of addition polymerization?
Ans. Addition polymerization offers several advantages. Firstly, it allows for a wide range of monomers to be used, leading to a vast variety of polymers with different properties and applications. Additionally, the process is relatively straightforward and can be carried out under mild conditions. It also produces high molecular weight polymers, which often exhibit improved mechanical and thermal properties.
5. How is the degree of polymerization determined?
Ans. The degree of polymerization refers to the average number of monomer units in a polymer chain. It can be determined by measuring the molecular weight of the polymer and dividing it by the molecular weight of a single monomer unit. This ratio provides an estimation of the number of monomer units in the polymer chain. Techniques such as gel permeation chromatography or mass spectrometry are commonly employed to measure the molecular weight of polymers and determine their degree of polymerization.
352 videos|596 docs|309 tests
Download as PDF
Explore Courses for JEE exam

Top Courses for JEE

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Previous Year Questions with Solutions

,

pdf

,

video lectures

,

Extra Questions

,

mock tests for examination

,

MCQs

,

past year papers

,

Objective type Questions

,

Sample Paper

,

Viva Questions

,

Summary

,

shortcuts and tricks

,

practice quizzes

,

study material

,

Free

,

Exam

,

Important questions

,

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

,

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

,

Overview of Polymers: Addition & Polymerization | Chemistry for JEE Main & Advanced

,

ppt

,

Semester Notes

;