Agricultural Engineering Exam  >  Agricultural Engineering Notes  >  Soil Mechanics Notes- Agricultural Engineering  >  Settlement Calculation - Consolidation Test - Consolidation of Soil, Soil Mechanicses

Settlement Calculation - Consolidation Test - Consolidation of Soil, Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering PDF Download

Settlement Calculation

Figure 23.5 shows the e – log σv' plots for normally consolidated and overconsolidated clay for settlement calculation. For normally consolidated clay the settlement (S) can be determined as:

\[S={{{C_c}} \over {1 + {e_0}}}H{\log _{10}}\left( {{{{{\sigma '}_{v0}} + \Delta {{\sigma '}_v}} \over {{{\sigma '}_{v0}}}}} \right)\]                    (23.4)

where H is total thickness of the soil layer.

For over-consolidated clay:  Case 1: σ'v0+Δσ'v < σ'c

\[S={{{C_s}} \over {1 + {e_0}}}H{\log _{10}}\left( {{{{{\sigma '}_{v0}} + \Delta {{\sigma '}_v}} \over {{{\sigma '}_{v0}}}}} \right)\]                       (23.5)

Case 2: σ'v0 < σ'c < σ'v0+Δσ'v  

\[S={{{C_s}} \over {1 + {e_0}}}H{\log _{10}}\left( {{{{{\sigma '}_c}} \over {{{\sigma '}_{v0}}}}} \right)\]   +  \[{{{C_c}} \over {1 + {e_0}}}H{\log _{10}}\left( {{{{{\sigma '}_{v0}} + \Delta {{\sigma '}_v}} \over {{{\sigma '}_c}}}} \right)\]                           (23.6)

where Cs is the swelling index.

Settlement Calculation - Consolidation Test - Consolidation of Soil, Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering

Fig. 23.5. Settlement calculation (a) Normally consolidated clay

               (b)  Overconsolidated clay .

The document Settlement Calculation - Consolidation Test - Consolidation of Soil, Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering is a part of the Agricultural Engineering Course Soil Mechanics Notes- Agricultural Engineering.
All you need of Agricultural Engineering at this link: Agricultural Engineering
64 docs

FAQs on Settlement Calculation - Consolidation Test - Consolidation of Soil, Soil Mechanicses - Soil Mechanics Notes- Agricultural Engineering

1. What is settlement calculation in soil consolidation?
Ans. Settlement calculation in soil consolidation refers to the process of determining the amount of vertical compression or settlement that occurs in a soil mass due to the application of a load. It is an important aspect in geotechnical engineering to understand and predict the settlement behavior of soil.
2. How is consolidation test performed on soil?
Ans. The consolidation test is performed on soil to determine its compressibility and settlement characteristics. The test involves applying a constant load to a soil sample and measuring the corresponding settlement over time. The test typically follows a standardized procedure, where the load is gradually applied and the settlement is recorded at specific time intervals.
3. What is the significance of consolidation test in soil mechanics?
Ans. The consolidation test is significant in soil mechanics as it helps in understanding the time-dependent settlement behavior of soils under loading. It provides valuable information about the compressibility, consolidation properties, and potential settlement of soil, which is crucial in designing foundations for structures, assessing stability, and predicting long-term settlement.
4. What factors influence soil consolidation?
Ans. Several factors influence soil consolidation, including the soil type, initial void ratio, applied load, drainage conditions, and time. The compressibility and settlement characteristics of soil are affected by these factors, and understanding their influence is essential in accurately predicting and calculating settlement in soil.
5. Can consolidation test results be used to estimate settlement in actual field conditions?
Ans. Yes, consolidation test results can be used to estimate settlement in actual field conditions. By analyzing the consolidation characteristics of a soil sample in the laboratory, engineers can determine the compressibility and settlement behavior of the soil. These results can then be extrapolated and applied to field conditions to estimate settlement under similar load and drainage conditions. However, it is important to consider site-specific factors and limitations while applying laboratory test results to field situations.
64 docs
Download as PDF
Explore Courses for Agricultural Engineering exam
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Free

,

Settlement Calculation - Consolidation Test - Consolidation of Soil

,

Settlement Calculation - Consolidation Test - Consolidation of Soil

,

shortcuts and tricks

,

pdf

,

study material

,

Semester Notes

,

Exam

,

Previous Year Questions with Solutions

,

Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering

,

video lectures

,

Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering

,

practice quizzes

,

Summary

,

Sample Paper

,

ppt

,

Extra Questions

,

MCQs

,

Soil Mechanicses | Soil Mechanics Notes- Agricultural Engineering

,

mock tests for examination

,

Viva Questions

,

Important questions

,

Settlement Calculation - Consolidation Test - Consolidation of Soil

,

past year papers

,

Objective type Questions

;