Mechanical Engineering Exam  >  Mechanical Engineering Notes  >  General Aptitude for GATE  >  Linear & Circular Arrangement

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering PDF Download

Importance of Linear & Circular Arrangement

  • Seating Arrangement questions in the Logical Reasoning section are renowned for their complexity, time-consuming nature, and the mental effort they demand. It's crucial to acknowledge their significance, especially in exams like CAT, where approximately 3-4 questions are dedicated to this topic. 
  • The accurate resolution of these questions can significantly elevate your percentile. However, it's equally essential to recognize that even a minor error can have substantial consequences due to negative marking. Thus, mastering these questions becomes a key aspect of optimizing overall exam performance.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

  • We can identify that these problems can be categorized into two types:
    (a) Linear Seating Arrangement Problems
    (b) Circular Seating Arrangement Problems

Linear Seating Arrangement 

As the name suggests, linear seating arrangement problems are those where arrangements are made in rows or lines. The arrangement can be in a single row, or there can be multiple rows, but generally, two-row questions are asked.

1. One Row Problems

One-row problems are those when the arrangement is made in a single line.
These problems can be divided into two types of conditions:

  • In which direction of the face is not given; in these, we assume direction according to our reference.
  • In which direction of the face is given like facing north, south or towards east, west; in these, we must plan to keep in mind these directions.

2. Two Row Problems

In the two-row arrangement, objects are arranged in two different rows facing each other. Now we can move on to solve an example of linear arrangement so that we have a better understanding of these types of questions.

But before moving forward with an example, keep in mind these important points:

  • Always note the conditions given in the short form and represent them pictorially.
  • If A is sitting to the immediate left of B, then it also means that B is on the immediate right of A.

  • If not specified, assume that all people are facing towards the centre or North (until and unless the direction is specified).
    Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

  • If you are unable to get any useful information from a sentence then better skip that line and move on to the next line. Then re-examine the skipped sentence after going through other sentences.

  • The meaning of and, who & adjacent in seating arrangement questions:
    Example: A sits third to the right of P and sits fourth to the right of T. It denotes A sits third right of P, A sits fourth right of T i.e. the given information is talking about the first person.

  • Adjacent means next to each other, not opposite to each other.
    Example: A and B are adjacent to each other, which means they are immediate neighbours of each other.

  • If “who” is given in a sentence, for example, A sits third to the right of P who sits fourth to the right of T. It denotes A sits right of P, P sits fourth right of T, and the given information is talking about the second person.

Steps to Solve Linear Arrangement Questions

1. Visual Representation

  • Following the comprehension of the reasoning scenario, create a visual linear sequence based on the given set's object count.
  • For instance, if the query instructs the arrangement of 5 individuals – Abdul, Birbal, Chaman, Druv, and Ehsan – in a line based on their heights from tallest to shortest, and stipulates that no two of them share the same height, then:
    Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

2. Use Symbols to Represent the Condition Given

  • For instance, if the given condition states that Abdul is taller than Dhruv but shorter than Ehsan, this condition can be symbolically denoted as E>A>D.
  • Another scenario might indicate that there exists exactly one person shorter than Birbal but taller than Chaman. A symbolic representation of this condition could be expressed as B _ C.
  • The ways to symbolically represent conditions are diverse, with no universally standardized approaches. It is advisable for students to formulate their own symbolic representations, prioritizing clarity and individual comfort.

3. Combine the Constraints to get the Optimal Solution.

  • After representing the conditions the final step should be to optimize the constraint such that it meets all the conditions.
  • This is the most critical step where the students' reasoning prowess and ability to organize the data come out in the open. With adequate practice, the right approach, and determination one can overcome this challenge.

Examples of Linear Arrangement 

Example.1.
Direction: Study the following information and answer the given questions.
Pawan, Qaseem, Rajan, Suresh, Tariq, Uzma, Waseem, and Zainab are sitting in a line facing north. Zainab sits third to the left of Suresh. Zainab sits at the extreme end of the row. Only one person sat between Suresh and Qaseem. Only two people sit between Qaseem and Waseem, who is an immediate neighbour of Pawan. Uzma sits third to the left of Rajan. 

Q: Who is an immediate neighbour of Tariq?
Sol: 
People: Pawan, Qaseem, Rajan, Suresh, Tariq, Uzma, Waseem, and Zainab. 

1) Zainab sits third to the left of Suresh. 
2) Zainab sits extreme end of the row. 
3) Only one people sit between Suresh and Qaseem.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

4) Only two people sit between Qaseem and Waseem, who is an immediate neighbor of Pawan

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

5) Uzma sits third to the left of Rajan

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Hence, Qaseem and Rajan is an immediate neighbor of Tariq

Example 2

Directions: Ten people– A, B, C, D, E, P, Q, R, S, and T are sitting in two rows with five persons in each row namely row-1 and row-2. Each person in row-1 is facing north and each person in another row is facing south. Each person in row 1 faces a person of another row. A, B, C, D, and E are facing towards north while P, Q, R, S, and T are facing to- wards the south but not necessarily in the same order

E is not an immediate neighbor of D. Neither P nor S sit at any of the extreme ends of the row. Q is an immediate neighbor of S and facing E. D is facing the person who is sitting 2nd to the right of the person who faces C. P is sitting 2nd to the right of S. T sits at one of the extreme ends but doesn’t face C. B is sitting to the left of D. R sits second to the left of T.

Q: If row-1 people sit in alphabetical order starting from the left end then who will face S?

Sol: 

1) D is facing the person who is sitting 2nd to the right of the person who faces C. 
2) B is sitting to the left of D. 
3) P is sitting 2nd to the right of S. 
4) Neither P nor S sit at any of the extreme ends of the row.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

5) R sits second to the left of T
6) T sits at one of the extreme ends but doesn’t face C

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

7) E is not an immediate neighbor of D. Using statement 7, Case 1.B will be eliminated. 
8) A sits to the left of E

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

D will face S if persons of Row 1 are arranged according to alphabetical order. So, the correct answer is D

Circular Seating Arrangement 

The circular seating arrangement is that type of seating arrangement where people are sitting or standing in a circular, square, or polygonal way.
There can be three types of distinctive forms of questions under this:
• Circular arrangement where people face the centre of the table.
• Circular arrangement in which people face outward of the table.
• Circular arrangement with some people facing the centre of the table while some people facing outward of the table.
Circular ArrangementCircular ArrangementThere can be two cases depending upon the facing of people:
Case1: When people are facing inwards or centre of the table then
(i) All their “rights” refer to the anticlockwise direction.
(ii) All their “left” refer to the clockwise direction.
Case2: When people are facing outward of the table
(i) All their “left” refer to the anti-clockwise direction.
(ii) All their “rights” refer to a clockwise direction.


Tips and Tricks to Solve Circular Arrangement Reasoning Questions

Candidates can find various tips and circular arrangement reasoning tricks below for solving the questions related to the Circular Arrangement Reasoning section. 

Tip 1: Circular Arrangement can be of clockwise and anticlockwise directions. 

Tip 2: Practice mock tests and quizzes as much as possible to get well-versed with all the topics and their question patterns to score well in the circular arrangement reasoning section.

Examples of Circular Arrangement

Example.3.
Consider an example now, representatives from eight different states viz. L, N, P, R, T, V, X and Z are sitting around a circular table facing the centre but not necessarily in the same order. Each of them is from a different state namely, Maharashtra, Assam, Gujarat, Kerala, Karnataka, Delhi, Madhya Pradesh and Punjab.

V sits second to the right of the representative from Kerala. A representative from Madhya Pradesh is to the immediate right of the representative from Kerala. N is third to the right of the representative from Madhya Pradesh. T is to the immediate left of P. Neither P nor T is an immediate neighbour of either N or the representative from Gujarat who sits second to the right of R. R is neither the representative of Kerala nor Madhya Pradesh. X and the representative from Maharashtra are immediate neighbours of each other. N is not the representative of Maharashtra. Only one person sits between P and a representative from Assam. Z sits third to the left of the representative from Punjab. A representative from Delhi sits second to the left of the representative of Karnataka. L is not the representative of Assam.

Now before moving forth to the solution, understand these basic steps that will help us solve this problem:
(i) Read the question carefully and note down the name or the characters that have to be arranged carefully.
(ii) Check and write down whether all the character is facing towards the centre or outwards or haphazardly some facing towards while others outward.
(iii) Now we will use diagrammatic representation to solve the question. Draw a circle with equidistant points and with the help of arrows signify the direction in which the characters are facing.
(iv) After this start reading the information and allot the places to the characters according to the information given in the question.
(v) Make cases for multiple possibilities and then rule out those cases that don’t fit the given information in the question.
(vi) Similarly go on deducing the cases and reach out to one possible case, which is the solution and eliminate all others.

Sol.
Now we will use the above steps and formulate the solution above problem:
In the above example, we are given 8 alphabets each corresponding to 8 states.
Representatives: L, N, P, R, T, V, X and Z
States: Maharashtra, Assam, Gujarat, Kerala, Karnataka, Delhi, Madhya Pradesh and Punjab.

  • We need to map representatives to their states, respectively.
  • Now first we will make a circle with 8 equidistant lines and respectively add the direction in which the representatives are facing.
  • Since all are facing towards the centre, everyone’s right is in the anticlockwise direction and everyone’s left is in the clockwise direction.
    Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Now we will read the main problems and try to get direct information. According to the problem:

1. V sits second to the right of the representative from Kerala.
2. A representative from Madhya Pradesh is to the immediate right of the representative from Kerala.
3. N is third to the right of the representative from Madhya Pradesh.

Here, we will first place V at the bottom-most place. We then place the representative from Kerala second to the left of V. This is because V sits second to the right of the representative from Kerala. Then we place the representative from Madhya Pradesh and N as given in the problem. So, we get the following figure.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical EngineeringNow no other direct information is given with which we can plot the diagram. So, we move on to the next statements.
4. T is to the immediate left of P.
5. Neither P nor T is an immediate neighbour of either N or the representative from Gujarat. So, we get three possible cases.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering6. Representative from Gujarat sits second to the right of R.
7. R is neither the representative of Kerala nor Madhya Pradesh.
So the third case gets eliminated as there is no place left for Gujarat.
Thus, cases 1 and 2 get amended, as shown below:

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering8. Only one person sits between P and the representative from Assam.
We know the possible positions of P so we can place a representative from Assam accordingly.
Here for each case, we get 2 cases, so now we have a total of 4 cases.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering9. Z sits third to the left of the representative from Punjab.
10. A representative from Delhi sits second to the left of the representative of Karnataka.
Plotting information given in these statements, possibilities 2. a and 2. b get eliminated.  We can see this as below:
When we see in cases 2. a and 2. b we have 4 places for these two representatives (Delhi & Karnataka).

Now, in case 2:
(A) 
(i) If we place the representative of Delhi as R, there is no place for a representative of Karnataka.
(ii) If we place the representative of Delhi as N, it is possible.
(iii) If we place the representative of Delhi to the left of T, there is no place for a representative of Karnataka.
(iv) If we place the representative of Delhi as T, there is no place for the representative of Karnataka.
So placing a representative of Delhi as N is possible as shown below.

The diagram looks like this.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical EngineeringNow we take the 9th statement and try to reason out 2. a again.
There are 3 possible places for Z (As a representative of Madhya Pradesh, a representative of Gujarat or a representative of Karnataka)

(B)
(i) Madhya Pradesh is not possible as there is no place for representatives of Punjab.
(ii) Similarly, Gujarat and Karnataka are also not possible.

  • Thus case 2. a is eliminated.
  • On a similar basis, case 2. b is also getting eliminated.
  • Thus case 1 remains.
    Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

(11)  X and the representative from Maharashtra are immediate neighbours of each other.
(12)  N is not the representative of Maharashtra.
(13)  L is not the representative of Assam.
From this statement, we get that only case 1. a is valid all else gets eliminated.
Hence, we get the final seating arrangement diagram of the circular arrangement as follows.
Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Solved Questions

Directions for the following three questions: Answer the following questions based on the statements given below:

(i) There are three houses on each side of the road.
(ii) These six houses are labelled as P, Q, R, S, T, and U.
(iii) The houses are of different colours, namely, Red, Blue, Green, Orange, Yellow and White.
(iv) The houses are of different heights.
(v) T, the tallest house, is exactly opposite to the Red coloured house.
(vi) The shortest house is exactly opposite to the Green coloured house.
(vii) U, the Orange coloured house, is located between P and S.
(viii) R, the Yellow coloured house, is exactly opposite to P.
(ix) Q, the Green coloured house, is exactly opposite to U.
(x) P, the White coloured house, is taller than R, but shorter than S and Q. 

Q1: What is the colour of the house diagonally opposite to the Yellow coloured house?
a) White
b) Blue
c) Green
d) Red
e)none of these
Ans: Option (D)
Sol: 
There are three houses on each side of the road => Draw 6 lines, 3 in each row, to accommodate P, Q, R, S, T, and U.
The houses are of different colours and different heights.
T is the tallest and is opposite to the red house => Let’s number T as 1.
The shortest house is opposite to greenhouse.
U is orange and is between P and S => Two cases arise here. P-U-S is one possibility and the other possibility is S-U-P.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

R is yellow and is opposite to P.
Q is green and is opposite U. We know that the greenhouse is opposite the shortest house. This implies that U is the shortest house => Number of U is 6.
P is white and is taller than R but shorter than S and Q => Apart from T, S and Q are also taller than P => S and Q can be 2 and 3 in any order => Number of P is 4 and the number of R is 5.

We know that P is opposite to R and Q is opposite to U => S is opposite to T
It is given that T is opposite to red house => S is the red house and hence T is the blue house.
So, we know the colours of all houses and the heights of P, R, T, and U.
In this question, we are asked to find the house that is opposite the yellow house. R is the yellow house, P is opposite to R and S is on the other corner in P’s row. Hence S is the house that is diagonally opposite to the yellow house and the colour of S is Red.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Q2: Which is the second tallest house?

a) P
b) S
c) Q
d) R
e)cannot be determined
Ans: Option (E)
Sol:
We only know that the second tallest house is either Q or S.  Hence the answer cannot be determined.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Q3: What is the colour of the tallest house?
a) Red
b) Blue
c) Green
d) Yellow
e)none of these
Ans: Option (B)
Sol:
We know that P is opposite to R and Q is opposite to U => S is opposite to T
It is given that T is opposite to red house => S is the red house and hence T is the blue house.
T is the tallest house and hence the colour of the tallest house is blue.

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

Try Yourself

Direction: Each of these questions is based on the information given below :

  1. 8 people E, F, G, H, I, J, K and L are seated around a square table - two on each side.
  2. The 3 ladies are not seated next to each other.
  3. J is between L and F.
  4. G is between I and F.
  5. H, a lady member is second to the left of J.
  6. F, a male member is seated opposite E, a lady member.
  7. There is a lady member between F and I.

Question for Linear & Circular Arrangement
Try yourself:Who among the following is to the immediate left of F?
View Solution

Question for Linear & Circular Arrangement
Try yourself:What is true about J and K?
View Solution

Question for Linear & Circular Arrangement
Try yourself:How many persons are seated between K and F?
View Solution

The document Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering is a part of the Mechanical Engineering Course General Aptitude for GATE.
All you need of Mechanical Engineering at this link: Mechanical Engineering
198 videos|165 docs|152 tests

Top Courses for Mechanical Engineering

FAQs on Linear & Circular Arrangement - General Aptitude for GATE - Mechanical Engineering

1. What is the significance of linear and circular arrangements in competitive exams?
Ans. Linear and circular arrangements are essential topics in competitive exams, especially in reasoning sections. They help assess a candidate's logical thinking, problem-solving skills, and ability to organize information spatially. Mastering these arrangements can significantly enhance performance in exams.
2. How do I approach solving linear seating arrangement questions?
Ans. To solve linear seating arrangement questions, follow these steps: 1. Read the problem statement carefully and note the given information. 2. Identify the number of people and any constraints or relationships mentioned. 3. Draw a linear diagram to represent the arrangement. 4. Place the individuals based on the clues provided, ensuring all conditions are satisfied. 5. Verify the arrangement by checking against all statements in the question.
3. What are some common tips for tackling circular arrangement reasoning questions?
Ans. Some useful tips for circular arrangement questions include: 1. Familiarize yourself with the direction of seating (clockwise or anticlockwise). 2. Start by placing fixed points if given, and then use the clues to fill in the rest of the seats. 3. Keep track of relationships and distances between individuals carefully. 4. Use diagrams to visualize the arrangement, as this can help in understanding complex situations. 5. Practice regularly to improve speed and accuracy.
4. Can you provide examples of linear arrangement questions commonly asked in exams?
Ans. Yes, common examples of linear arrangement questions include: 1. "A, B, C, D, E are sitting in a row. A is to the left of B but to the right of C. Where is D sitting?" 2. "Five friends are sitting in a line. N is sitting at one end, and M is sitting next to N. What can be inferred about their positions?"
5. What are some frequently asked questions related to circular arrangements in exams?
Ans. Frequently asked circular arrangement questions include: 1. "In a circular table, A is sitting next to B, and C is opposite to A. Where will D sit if he is to the left of B?" 2. "Five people are sitting around a circular table. If P is to the right of Q and R is to the left of S, who is sitting opposite to P?"
198 videos|165 docs|152 tests
Download as PDF
Explore Courses for Mechanical Engineering exam

Top Courses for Mechanical Engineering

Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

,

Semester Notes

,

practice quizzes

,

Viva Questions

,

Extra Questions

,

mock tests for examination

,

Previous Year Questions with Solutions

,

MCQs

,

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

,

past year papers

,

video lectures

,

Objective type Questions

,

Exam

,

pdf

,

ppt

,

Sample Paper

,

Linear & Circular Arrangement | General Aptitude for GATE - Mechanical Engineering

,

study material

,

Important questions

,

shortcuts and tricks

,

Summary

,

Free

;