Craft Ideas: 3D Corrugated Paper Quilling Flowers | Hands on Art & Craft - Class 1 PDF Download

Material Required

1. A4 sized corrugated sheet Blue
2. A4 sized corrugated sheet Red
3. A4 sized corrugated sheet green
4. A4 sized corrugated sheet Yellow
5. A4 sized corrugated sheet black
6. Scissors
7. Glue Gun
8. Lace
9. black marker & a
10. Glass container

Directions to be followed

1. Take the A4 sheets and cut them into 1/2 inch strips.
2. Make sure you cut along the short edge to get a lovely zig zag pattern against the grain on the strip.
   
3. The advantage of using an A4 sheet is that the length is the same for each strip & you can cut it as wide as you want the 3D effect to be.
4. For the petals, roll each strip in a loose circular fashion and glue the end in place.
5. We used a hot glue gun. You can use craft glue like Fevicol also.
   
6. Once the glue dries, pinch one end to form a petal-like shape.
7. The key to getting a nice petal shape is to roll the strip loose.
8. For the center, tightly roll the yellow strip and glue in place.
9. Now arrange the petals in a circular arrangement around the center and glue in place. Let dry.
10. Make as many flowers as you wish. You will need 6 strips to make 1 flower.
11. To give it some shading, we used lovely soft pastels to give it depth
12. Cut the green into leaf shapes.
    
13.  cut some petal shapes from the corrugated sheets and stick them on the front.
14. Add some stems by rolling a black sheet into small pipes.
15. Then I arranged the flowers in a glass with some pebbles and a corrugated strip tied to the center of it.