Computer Science Engineering (CSE) Exam  >  Computer Science Engineering (CSE) Notes  >  Computer Networks  >  Important Short Questions & Answers - Fundamentals & Link Layer

Important Short Questions & Answers - Fundamentals & Link Layer | Computer Networks - Computer Science Engineering (CSE) PDF Download

 1. What are the three criteria necessary for an effective and efficient network?
The most important criteria are performance, reliability and security.
Performance of the network depends on number of users, type of transmission medium, and the capabilities of the connected h/w and the efficiency of the s/w.
Reliability is measured by frequency of failure, the time it takes a link to recover from the failure and the network’s robustness in a catastrophe.
Security issues include protecting data from unauthorized access and viruses.

2. Group the OSI layers by function?
The seven layers of the OSI model belonging to three subgroups.
Physical, data link and network layers are the network support layers; they deal with the physical aspects of moving data from one device to another.
Session, presentation and application layers are the user support layers; they allow interoperability among unrelated software systems.
The transport layer ensures end-to-end reliable data transmission.

3. What are header and trailers and how do they get added and removed?
Each layer in the sending machine adds its own information to the message it receives from the layer just above it and passes the whole package to the layer just below it. This information is added in the form of headers or trailers. Headers are added to the message at the layers 6,5,4,3, and 2. A trailer is added at layer2. At the receiving machine, the headers or trailers attached to the data unit at the corresponding sending layers are removed, and actions appropriate to that layer are taken.

4. What are the features provided by layering?
Two nice features:

  • It decomposes the problem of building a network into more manageable components.
  • It provides a more modular design.

5. Why are protocols needed?
In networks, communication occurs between the entities in different systems. Two entities cannot just send bit streams to each other and expect to be understood. For communication, the entities must agree on a protocol. A protocol is a set of rules that govern data communication.

6.   What are the two interfaces provided by protocols?

  • Service interface
  •  Peer interface
    Service interface- defines the operations that local objects can perform on the protocol.
    Peer interface- defines the form and meaning of messages exchanged between protocol peers to implement the communication service.

7. Mention the different physical media?

  • Twisted pair(the wire that your phone connects to)
  • Coaxial cable(the wire that your TV connects  to)
  • Optical fiber(the medium most commonly used for high-bandwidth, long-distance links)
  • Space(the stuff that radio waves, microwaves and infra red beams propagate through)

8. Define Signals?
Signals are actually electromagnetic waves traveling at the speed of light. The speed of light is, however, medium dependent-electromagnetic waves traveling through copper and fiber do so at about two-thirds the speed of light in vacuum.

9. What is wave’s wavelength?
The distance between a pair of adjacent maxima or minima of a wave, typically measured in meters, is called wave’s wavelength.

10. Define Modulation?
Modulation -varying the frequency, amplitude or phase of the signal to effect the transmission of information. A simple example of modulation is to vary the power (amplitude) of a single wavelength.

11. Explain the two types of duplex?

  • Full duplex-two bit streams can be simultaneously transmitted over the links at the same time, one going in each direction.
  • Half duplex-it supports data flowing in only one direction at a time.

12. What is CODEC?
A device that encodes analog voice into a digital ISDN link is called a CODEC, for coder/decoder.

13. What is spread spectrum and explain the two types of spread spectrum?
Spread spectrum is to spread the signal over a wider frequency band than normal in such a way as to minimize the impact of interference from other devices.

  • Frequency Hopping
  • Direct sequence

14. What are the different encoding techniques?

  • NRZ
  • NRZI
  • Manchester
  • 4B/5B

15.  How does NRZ-L differ from NRZ-I?
In the NRZ-L sequence, positive and negative voltages have specific meanings: positive for 0 and negative for 1. in the NRZ-I sequence, the voltages are meaningless.
Instead, the receiver looks for changes from one level to another as its basis for recognition of 1s.

16. What are the responsibilities of data link layer?

Specific responsibilities of data link layer include the following. a) Framing b) Physical addressing c) Flow control d) Error control e) Access control.

17. What are the ways to address the framing problem?

  • Byte-Oriented Protocols(PPP)
  • Bit-Oriented Protocols(HDLC)
  • Clock-Based Framing(SONET)

18. Distinguish between peer-to-peer relationship and a primary-secondary relationship. peer -to- peer relationship?
All the devices share the link equally.
Primary-secondary relationship: One device controls traffic and the others must transmit through it.

19. Mention the types of errors and define the terms?
There are 2 types of errors

  •         Single-bit error.
  •         Burst-bit error.

Single bit error: The term single bit error means that only one bit of a given data unit (such as byte character/data unit or packet) is changed from 1 to 0 or from 0 to 1.
Burst error:  Means that 2 or more bits in the data unit have changed from 1 to 0 from 0 to 1.

20. List out the available detection methods.
There are 4 types of redundancy checks are used in data communication.

  •         Vertical redundancy checks (VRC).
  •         Longitudinal redundancy checks (LRC).
  •         Cyclic redundancy checks (CRC).
  •         Checksum.

21. Write short notes on VRC.
The most common and least expensive mechanism for error detection is the vertical redundancy check (VRC) often called a parity check. In this technique a redundant bit called a parity bit, is appended to every data unit so, that the total number of 0’s in the unit (including the parity bit) becomes even.

22. Write short notes on LRC.
In longitudinal redundancy check (LRC), a block of bits is divided into rows and a redundant row of bits is added to the whole block.

23. Write short notes on CRC.

The third and most powerful of the redundancy checking techniques is the cyclic redundancy checks (CRC) CRC is based on binary division. Here a sequence of redundant bits, called the CRC remainder is appended to the end of data unit.

24. Write short notes on CRC checker.
A CRC checker functions exactly like a generator. After receiving the data appended with the CRC it does the same modulo-2 division. If the remainder is all 0’s the CRC is dropped and the data accepted. Otherwise, the received stream of bits is discarded and the dates are resent.

25. Define checksum.
The error detection method used by the higher layer protocol is called checksum. Checksum is based on the concept of redundancy.

26. What are the steps followed in checksum generator?
The sender follows these steps
a) the units are divided into k sections each of n bits.
b) All sections are added together using 2’s complement to get the sum.
c) The sum is complemented and become the checksum. d) The checksum is sent with the data.

27. Mention the types of error correcting methods.
There are 2 error-correcting methods.

  • Single bit error correction
  • Burst error correction.

28. Write short notes on error correction?
It is the mechanism to correct the errors and it can be handled in 2 ways.

  •         When an error is discovered, the receiver can have the sender retransmit the entire data unit.
  •         A receiver can use an error correcting coder, which automatically corrects certain errors.

29. What is the purpose of hamming code?
A hamming code can be designed to correct burst errors of certain lengths. So the simple strategy used by the hamming code to correct single bit errors must be redesigned to be applicable for multiple bit correction.

30. What is redundancy?
It is the error detecting mechanism, which means a shorter group of bits or extra bits may be appended at the destination of each unit.

31. Define flow control?
Flow control refers to a set of procedures used to restrict the amount of data. The sender can send before waiting for acknowledgment.

32. Mention the categories of flow control?
There are 2 methods have been developed to control flow of data across communication links. a) Stop and wait- send one from at a time. b) Sliding window- send several frames at a time.

33. What is a buffer?
Each receiving device has a block of memory called a buffer, reserved for storing incoming data until they are processed.

The document Important Short Questions & Answers - Fundamentals & Link Layer | Computer Networks - Computer Science Engineering (CSE) is a part of the Computer Science Engineering (CSE) Course Computer Networks.
All you need of Computer Science Engineering (CSE) at this link: Computer Science Engineering (CSE)
21 videos|107 docs|66 tests

Up next

FAQs on Important Short Questions & Answers - Fundamentals & Link Layer - Computer Networks - Computer Science Engineering (CSE)

1. What is the purpose of the Fundamentals & Link Layer in computer networking?
Ans. The Fundamentals & Link Layer is responsible for the transmission of data packets over a physical network medium. It ensures reliable and error-free communication between network devices by managing protocols, addressing, and error detection.
2. How does the Fundamentals & Link Layer handle data transmission errors?
Ans. The Fundamentals & Link Layer uses error detection techniques such as checksums and cyclic redundancy checks (CRC) to identify and correct transmission errors. These techniques involve adding extra bits to the data packets that allow the receiving device to verify the integrity of the transmitted data.
3. What is the difference between a MAC address and an IP address?
Ans. A MAC address, also known as a physical address, is a unique identifier assigned to a network interface card (NIC) by the manufacturer. It operates at the Link Layer and is used for communication within a local network. On the other hand, an IP address is a logical address assigned to a device on a network to enable communication across different networks. It operates at the Network Layer.
4. How does the Fundamentals & Link Layer ensure reliable data transmission?
Ans. The Fundamentals & Link Layer ensures reliable data transmission by implementing protocols such as the Ethernet protocol. These protocols use techniques like acknowledgment and retransmission to guarantee that data packets are successfully delivered to the recipient. Additionally, error detection and correction mechanisms are employed to identify and fix transmission errors.
5. What are the main functions of the Link Layer?
Ans. The Link Layer performs several important functions, including framing, which involves encapsulating data packets into frames for transmission. It also manages access to the physical network medium through protocols like CSMA/CD (Carrier Sense Multiple Access with Collision Detection). Furthermore, it handles error detection, flow control, and addressing within a local network.
21 videos|107 docs|66 tests
Download as PDF

Up next

Explore Courses for Computer Science Engineering (CSE) exam
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
10M+ students study on EduRev
Related Searches

Important Short Questions & Answers - Fundamentals & Link Layer | Computer Networks - Computer Science Engineering (CSE)


video lectures


past year papers


Objective type Questions


shortcuts and tricks




Semester Notes


Important Short Questions & Answers - Fundamentals & Link Layer | Computer Networks - Computer Science Engineering (CSE)


practice quizzes


Extra Questions


mock tests for examination


Previous Year Questions with Solutions


study material


Important questions


Viva Questions






Important Short Questions & Answers - Fundamentals & Link Layer | Computer Networks - Computer Science Engineering (CSE)


Sample Paper