AUTOCAD 3D HOUSE PART5 - CAR PORCH | AUTOCAD PORCH | 3D CAR PORCH Video Lecture | How to create 3D House using AutoCAD? - Software Development

the next item to be created is the pouch
to create the car pouch we have to start
with the pillars we are planning to keep
the two pillars in the same layer as
that of the wall because both the wall
and the pillar is going to share the
same finish so I'll activate the 3d wall
layer as the current layer then using
the pillar which is given the plan you
can trace a profile that can be extruded
so I'll start with a polyline then I
will start picking the endpoints here
then I'll give clothes okay and the same
polyline can be copied onto the side so
I will give copy command and I will
select it they have selected the same
polyline this is the base point and this
is the second point so I have copied it
now you can just freeze all unwanted
layers that is given in the plan so I'll
go to layer properties manager and I
will select layers starting with the dos
and windows to the walls and I will just
give freeze okay now we have two
profiles here which can be readily
extruded in fact this profile has to be
lowered to the ground level and this
profile remains in the floor level so
you know that the difference between the
floor level and the ground level is 45
centimeter or one and a half feet so we
will just move this profile first before
you extrude it
I'll give move command and I will select
this profile and I will select this as a
base point and it just typed the value
45 now it has moved down now we will
extrude these two profiles so I'll give
extrude command and I have selected this
profile and this profile is to be
extruded through a height of 45 plus 210
in fact at the height of the pillar the
pillar goes till the lintel level since
it is in the ground level I have to give
45 plus 2 10 which is 255 so I have
extruded this pillar and
we will extrude this profile so I give
extrude command and the height of
extortion is just 210 because this
pillar isn't that this profile is in the
floor level so I will give 210 okay so I
have created two pillars if you want you
can do various herds or different levels
of detailing on this pillar next we will
create a slab which cover the sit-out
and the porch area to create the slab we
have to start with the polyline but
before that we have to make the layer in
which the slab is to be kept as the
current layer I'll keep the slab in the
3d mold layer because all this molding
work and the slab is going to share the
same material so preferably white color
so I'll start now I can start with the
polyline so I give polyline and I'll
start from this point and I should pick
a point over here and that should be
corresponding to this point so I can use
point filters so I will go to point
filters and I will select door Tex off
end of this and I'll select dot y off
end of this so I've got a point here
now you can come to this point and you
can connect with this point and you can
just give close
I gave close now I've got a close
profile
these two endpoints are to be extended
through a distance of 75 centimeter in
the negative y-direction so I picked it
I have got a hard grip now I can take
the cursor in the negative y-direction
and I can type the value 75 so it got a
stretched similarly you can just click
this point and you activate this as a
hard grip take the cursor in the
negative y-direction and you type the
distance of 75 this got extended
now you can readily extrude this profile
so I'll give extrude command and the
height of extrusion is 10 centimeter
because that is the thickness of the
slab next we have to create a mini
parapet over here okay that parapet will
keep in the same layer as that of the
mold so we don't have to change any
layers here now I'll start with the
polyline again and I'll pick the
endpoint here next point here and next
point is endpoint now I have to give an
offset I'll give an offset distance of
10 centimeter because that is the
thickness of the parapet wall so that
offset is given now you have to connect
these two endpoints using another
polyline then you can period it join and
close so I give P edit and I will select
this now you go to join option select
this one this one and you can just give
close so you have made a single profile
now you can extrude this profile for the
parapet wall so I just extruded it
through height of 30 centimeter or 1
feet so I give 30 centimeter height so
you have made a parapet wall okay this
parapet wall he is to be given a beading
work at the end so for that we have to
create a profile so I'll align the UCS
on this face before I create the profile
so I will give you CS command and I will
take three-point option I keep my origin
here X here and Y here so I'll start
with a polyline and I will pick my start
point here then I will move 7.5 in the
leftward direction so I type 7.5 then
down to 0.5
then rightward 2.5 and I'll break the
polyline here then we'll start under the
polyline from here 7.5 down then 2.5
leftward and 2.5 upward now I'll connect
these two polylines using an arc poly
line arc so I give polyline command
again then I will select this as a start
point then I'll go to our composition
the second point option select this as a
second point and you connect with this
end point so you have four three
segments now these segments have to be
joined as a single object so I will go
to P edit select this object then you go
to char an option and you select all
this objects which are to be joined with
the existing polyline so you have got a
single profile now we are going to
extrude this profile along a path so we
have to draw the path again by using a
polyline but before you do the path you
have to align the UCS with the base of
this object okay so I'll go to UCS
command and I will just give enter so it
will go back to WCS or world coordinate
setup and you know that WG is in is in
the base of this house so I will go to
polyline now and I will start from here
next point is this endpoint and next one
is the Zen point so we have made a path
along which this profile is to be
extruded now I give extrude command and
you can select the profile then you go
to path option of extrusion command so I
give path then you select this path
along which it is to be extruded now you
have got the profile X student along
that path you can shade it and you can
take a look and you can just orbit this
model so this is how the parts with
pillars and the parapet wall and the
molding Plus this lab which you have
created for the pose will appear