Electronics and Communication Engineering (ECE) Exam > Electronics and Communication Engineering (ECE) Videos > MIPS Assembly Programming Simplified > MIPS Tutorial 4 Printing a Character
MIPS Tutorial 4 Printing a Character Video Lecture | MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE)
FAQs on MIPS Tutorial 4 Printing a Character Video Lecture - MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE)
| 1. How do I print a character in MIPS? |  |
Ans. To print a character in MIPS, you can use the syscall instruction with the appropriate value for the print character system call. This value is typically 11. You can load the character into a register and then use the syscall instruction to print it.
| 2. Can I print multiple characters in one instruction in MIPS? | |
Ans. No, you cannot print multiple characters in one instruction in MIPS. Each character needs to be loaded into a register and printed individually using the print character system call.
| 3. How can I print a newline character in MIPS? | |
Ans. To print a newline character in MIPS, you can load the ASCII value for a newline character (10) into a register and then use the syscall instruction with the print character system call to print it.
| 4. Is it possible to print a character without using the syscall instruction in MIPS? | |
Ans. No, it is not possible to print a character without using the syscall instruction in MIPS. The syscall instruction is used to make system calls, including the print character system call, which is necessary to display characters on the screen.
| 5. Can I print characters other than the ASCII character set in MIPS? | |
Ans. Yes, you can print characters other than the ASCII character set in MIPS. You can load the desired character into a register and then use the syscall instruction with the print character system call to display it on the screen. However, keep in mind that the display may not show the character correctly if the character set used by the display device is different from the ASCII character set.
Text Transcript from Video
what's up guys well here I am again
and now it's time to learn more MIPS and
as usual go to Smurf on your calm I just
to see what we have there and in this
tutorial we're going to learn about
printing a character okay
for those of you who don't know what a
character is well it's just a character
it's just like a letter or symbol so as
usual just define two sections that data
a text data has all the data text
instructions and for readability for
spaces maybe and then just say my
character : and to declare character
just do that byte and in quotation marks
we do maybe M um and that's going to be
enough but you can also do it like in
single quotation marks and after that we
just go to the instruction part and it's
going to be the same thing as printing
like a string if you're printing a
string it's going to be the same thing
so or text so we just have to do load
immediate tell us I'm v-0 and what's
this what's the code for to printer
screen and then load address the low
sign is 0 comma my character and finally
we do a cisco or do it so it's like
first we declare a variable in random
access memory my character the type is a
bite and a character is one byte yeah
remember one character is a bite or a
bits and it's just the letter M then we
say okay print out this text and what is
the text okay the character so print it
out and then do it so now let's test it
we save it assemble and then we go here
run
voila so we printed a value M so now you
know how to print our character I hope
you enjoyed this tutorial see you the
next time and don't forget to subscribe
thank you
yeah
and now it's time to learn more MIPS and
as usual go to Smurf on your calm I just
to see what we have there and in this
tutorial we're going to learn about
printing a character okay
for those of you who don't know what a
character is well it's just a character
it's just like a letter or symbol so as
usual just define two sections that data
a text data has all the data text
instructions and for readability for
spaces maybe and then just say my
character : and to declare character
just do that byte and in quotation marks
we do maybe M um and that's going to be
enough but you can also do it like in
single quotation marks and after that we
just go to the instruction part and it's
going to be the same thing as printing
like a string if you're printing a
string it's going to be the same thing
so or text so we just have to do load
immediate tell us I'm v-0 and what's
this what's the code for to printer
screen and then load address the low
sign is 0 comma my character and finally
we do a cisco or do it so it's like
first we declare a variable in random
access memory my character the type is a
bite and a character is one byte yeah
remember one character is a bite or a
bits and it's just the letter M then we
say okay print out this text and what is
the text okay the character so print it
out and then do it so now let's test it
we save it assemble and then we go here
run
voila so we printed a value M so now you
know how to print our character I hope
you enjoyed this tutorial see you the
next time and don't forget to subscribe
thank you
yeah
About this Video
|
Nov 21, 2024 Last updated |
Video Description: MIPS Tutorial 4 Printing a Character for Electronics and Communication Engineering (ECE) 2024 is part of MIPS Assembly Programming Simplified preparation.
The notes and questions for MIPS Tutorial 4 Printing a Character have been prepared according to the Electronics and Communication Engineering (ECE) exam syllabus.
Information about MIPS Tutorial 4 Printing a Character covers all important topics for Electronics and Communication Engineering (ECE) 2024 Exam.
Find important definitions, questions, notes, meanings, examples, exercises and tests below for MIPS Tutorial 4 Printing a Character.
Introduction of MIPS Tutorial 4 Printing a Character in English is available as part of our MIPS Assembly Programming Simplified for Electronics and Communication Engineering (ECE) & MIPS Tutorial 4 Printing a Character in
Hindi for MIPS Assembly Programming Simplified course. Download more important topics related with notes, lectures and mock test series for
Electronics and Communication Engineering (ECE) Exam by signing up for free.
Description
Video Lecture & Questions for MIPS Tutorial 4 Printing a Character Video Lecture | MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE) - Electronics and Communication Engineering (ECE) full syllabus preparation | Free video for Electronics and Communication Engineering (ECE) exam to prepare for MIPS Assembly Programming Simplified.
Information about MIPS Tutorial 4 Printing a Character
Here you can find the meaning of MIPS Tutorial 4 Printing a Character defined & explained in the simplest way possible.
Besides explaining types of MIPS Tutorial 4 Printing a Character theory, EduRev gives you an ample number of questions to practice MIPS Tutorial 4 Printing a Character tests,
examples and also practice Electronics and Communication Engineering (ECE) tests.
|
Explore Courses for Electronics and Communication Engineering (ECE) exam
|
|
Signup for Free!
Signup to see your scores go up within 7 days! Learn & Practice with 1000+ FREE Notes, Videos & Tests.
Related Searches
past year papers
,Extra Questions
,Free
,shortcuts and tricks
,MCQs
,Semester Notes
,Previous Year Questions with Solutions
,Summary
,mock tests for examination
,Viva Questions
,video lectures
,ppt
,Important questions
,Sample Paper
,MIPS Tutorial 4 Printing a Character Video Lecture | MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE)
,MIPS Tutorial 4 Printing a Character Video Lecture | MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE)
,Objective type Questions
,study material
,Exam
,practice quizzes
,MIPS Tutorial 4 Printing a Character Video Lecture | MIPS Assembly Programming Simplified - Electronics and Communication Engineering (ECE)
,
Study MIPS Tutorial 4 Printing a Character on the App
Students of Electronics and Communication Engineering (ECE) can study MIPS Tutorial 4 Printing a Character alongwith tests & analysis from the EduRev app,
which will help them while preparing for their exam. Apart from the MIPS Tutorial 4 Printing a Character,
students can also utilize the EduRev App for other study materials such as previous year question papers, syllabus, important questions, etc.
The EduRev App will make your learning easier as you can access it from anywhere you want.
The content of MIPS Tutorial 4 Printing a Character is prepared as per the latest Electronics and Communication Engineering (ECE) syllabus.
|
© EduRev
|
Education Revolution
|
Follow Us
|
Signup to see your scores
go up within 7 days!
Access 1000+ FREE Docs, Videos and Tests
Takes less than 10 seconds to signup