SolidWorks 2014 Tutorial 8: Arcs and Polygons Types and using Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

to to remember it let's start a new
sketch on top lane now let's go to the
next sketch to the arc if you expand the
menu you have three different types of
arcs and this time you don't need to
draw a whole circle you can just throw
your arcs so let's try to make a center
point rectangle in the origin and now
let's activate the three points are so
here you see the three points are shaded
in here you can see a hint how you can
use that or where you place your points
the first point second point fair point
so here you can slick first point and
the second point now you can specify the
radius if you are so you're done click
there so you are done so the second time
is the tip two points arc and this time
you are not able to change this case two
points you are not able to change in the
radius of your art so you have only one
choice will be defined to be as a
tangent so it's like this two point
first point second point
let's try so here you see your your arc
so you can just flick a different place
you're able to see you are so here is
your art so it gives you an arc with
radius between these two points so this
is the only way to get that art let's
try to use it with two lines here let's
select the two points are slick this
point this point
so this is your art and you have a third
type where you can choose your center
point your the point then start to
go an arc and that's in turf I now let's
move to polygon is all squad is to use
polygon then choose the number of edges
three you select three simply you're
going to create our tango so this is a
very fast rate use protocol to create a
very positive tangle and there is two
options to make it outside the circuit
or inside circuit here you can change
the number of your polygons edges and
then one thing you can add dimension for
your color and one thing I want to say
if you want to define it can select one
of the edges if it's not dimension
select one adjust the relation make
horizontal then make this point to the
origin center point so you define your
polygon so this is a way how to define
your polygons