145 SolidWorks Drawing Tutorial: BOM and Balloons Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

now we are in the last stage before
finishing our drawing and sending it to
printing so as we see we add all
dimensions and we had a look at the
views on different views if you want to
use some special of views to make some
parts clear to see or whatever and also
if you go to annotation you will have
the surface finish word sample and so on
the art is to use just to lick what you
want to add and select the surface for
example this piston its surface you can
add that simple amount Pro surface
finish or whatever so these types of
simple you already studied in the
engineering code and if you need to add
them so you can just sleep there is
nothing special this just now we're
going to show an important step before
finishing your drawings you need to show
the names of the bars the number of bars
your drawing
so this can be done by the Bill of
material you can reach the video from
material and annotation menu tables here
you see Bill of Materials so so select
drawing and so we just do it again
select a view then go to tables of
materials so you will get this menu at
the bit of material menu you have the
standard one and parts only to believe
it only and so on let this one die go to
youtube leave it only and then you will
click OK so now you will see the Bill of
Materials shown in your drawing so here
you can place it in good place so you
can see the names of the parts engage in
this
drawing and if you click here you will
have the ability to change the number
positioning and so on must change the
size of the text so here you have your
bit of material so also you can show it
on the parts they will look okay but in
this case we don't have sub assemblies
so you'll get the same type of material
now we have an issue that we see our
beloved here well we don't know where
are the parts for example who are not
familiar with crystals will not know
where the piston head missing pin so
here comes the use of balloons so you
have balloons you are able to add
balloons one by one so for example this
is number one
this is the piston head automatically it
is wide so if you have here number one
and if you click this one you would get
number three which is piston rod and
here you can see number four which is
the piston rod cap then you have here
number two the piston pin so we can also
if you have a lot of parts and you don't
want to do with one by one you just
cancel these balloons click on the
deleted you have all two balloons so
solar doors going to generate the
balloons automatically to your parts so
usually then go to what balloons so now
click OK you will see
Williams he asserted automatically area
number three but still you are missing
number two then you need to add it by
yourself it's not churning this part
we're going to have it here so when
you're done click OK
and so now our drawing is almost ready
to be printed
because sinkhole dimensions balloons
parts bill of materials the title block
and so on
so I hope this set of torah was useful
and you are ready to create your own
drawings