182 SolidWorks Mold Tools Tutorial: Parting Lines (inserting; split line; fixing) Video Lecture | SolidWorks: Essential Training (All Commands included) - IT & Software

this is tutorial number 182 in this
tutorial we'll talk about the next
section or the next command the parking
lines
and it is different than the parting
line analysis and we will talk about
them and we will see how to insert the
parting lines in two cases the first
case is the mobile cover where the
product in one block and the second exam
will be the face where the product is
lying between two blocks small blocks
and then we will have a look at some
parting line issues and how to sort them
and how to select the edges and have a
look again at the mod folder and how it
changed so here we have the mobile cover
which we made in one of the previous
tutorials and we perform a parting line
analysis the parting line analysis will
give you a preview where the parting
line will be located we run the parting
line analysis for this but cover UNMISS
liquid tto plane as the direction of
poll but we didn't see any parting line
so this is not an issue because so the
world considered this product or this
part will be included in the first block
or the mall so the parting line will be
on the edge over there so now we can
select the parting line which insert the
actual or the real parting line for our
mold so click on the parting line and
here you get the options so the
direction of poll is the top lane but
before we inserting the parting line we
need to insert the mole folder which we
set about in the previous tutorial click
on insert mod folder
and here we had insert or demote folder
so now after selecting the insert mode
folder click the parting line the
direction of poll is the top plane
you
and then the draft ankle which we said
bought it and the draft analysis
tutorial
as you remember we already performed a
draft analysis and it is ready for
dispersals so we said we pick it 1/2
degree and then here you can perform
draft analysis one more time as you
notice we don't have any issues with
this product because we already perform
the draft analysis before
and notice the parting line which are
the edges selected automatically over
here and you can see them in purple over
there if you have a look to the edge you
can see the parting line which we
couldn't see in the parting line
analysis so this is the place of the
parting line and when you are done about
the colors we already talked about them
and the draft analysis tutorial and
there is no need for splitting the faces
because the parting line on the edge and
we will have a case in the next example
where we need to use this plate faces
when you are done click OK so now we
have the parting line and we know that
the third part of this product will be
laying on the upper half of the mold or
the in one block of the mold
and here what I mean as we said in the
Torah before when we showed you this
picture the mobile cover would be laying
on the left side of the block and the
parting line will be you can imagine
over there
and if you look to the future trees you
will see the parting line option is over
there and you can indicate anytime
so now let's have a look at the next
sample the base where the product could
be laying between two blocks
so we have the to insert the mold
further and then go to the parting line
and select the direction of board the
rationale pole is the front plane and
let's say one degree draft or this
making 0 in this case
this is only an example just of what
seeing faces that the trap and let's run
a draft analysis you will see that there
is no any parting line is selected so in
this case you need to use played faces
and then you are able to select the
parting line select over there over
there click OK we already knew that the
parting line should be laying over there
because we run the parting line analysis
before but as you notice we have a
parting line warning that not for the
parting line are selected if we idiot
again here you are not able to select
any parting line on the top side or on
the back on the button you can select
this edge click ok but still we are not
able to select on the top over there
so I'm going to delete this parting line
and see how we can solve it so delete
and here we have a filleted
I would suppress this feature and
suppress the dome there down there but
we can look a bit easier but still you
can have them split them as well and
here we will try to insert
parting line again front plane dropped
analysis and split faces this time you
didn't see any line for an edge silly in
the bottom so fix it from here and we
will start the sketch and
this face and draw a line parallel to
the front plane
making sure that it is covering or
exceeding the product go to the mold
tools and split line feature which we
took it about and here it comes handy so
here is the counter sketch and faces to
split this face and this face click ok
so now we have to split it faces hide
this line not the sketch and run the
parting line analysis one more time and
pick the front plane from the draft
analysis split faces and now you are
able to select this edge and this edge
and here we have the two pitch in the
bottom edge when you are done click OK
and here we have the parting line is
pouring or showing without any warnings
and here if we go back to the mold
folders and have a look you will see
that the cavity surface buddy we have
one body and the core surface body is
again another body so you can see that
the cavity body is the green one and the
core body is the red over there
so you can imagine that one side is one
block on the other side on the second
row
you