22- AutoDesk Beginner Tutorial: Inserting Reference Planes Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

this is tutorial number 22 and in this
tutorial I'm going to cover an important
command for 3d modeling and drawing
which is plain plain it will be more
used in the practical examples which I
am going to upload in this channel and
the plane is very important to make the
reference constructions or reference
sketches to help achieving the original
modeling so you have many options here
opposite from plane is the simplest one
most of these planes will be required to
be used in some kind of more advanced
modeling or complicated modeling so in
this case it will be available to use
the offset to give you an idea how to
create a reference or to insert another
plane so in this case I'm going to make
an offset clear and for it
I want it to be parallel to the XZ plane
and here you can notice the distance
required as offset they can write to 10
so now if you notice here you have a
plane war plane one I should we already
created so now we have plane and it is
parted to the XZ plane
also you can again make another off the
plane to be offset from this then
choose the distance by dragging or just
simply add another so now we have two
planes this is the reference and here we
have the work linearly edited now we
have the third plane now we have three
planes and we can sketch on them and
that what I'm going to do with the next
tutorial when I am going to use the loft
feature so I hope this will give you a
basic idea how to use the reference
planes