48 AutoDesk Inventor beg.Tutorial: Chamfer in 3D model Video Lecture | Autodesk Inventor: A Complete Learning - Design Softwares

tuturro 48 and inventor and this star
we're going to talk about the 3d model
chamfer the previous story talk about
the 2d sketch shaft and in this time we
will talk about the 3d chopper let's
start a quick primitive or defined 3d
block okay
let's activate the chamfer we see it
here you can select the edges where you
want to apply your chopper and here you
can make the distance of the chapter and
by default inventor using the distance
jumper with equal distances and so let's
select a second edge this edge this edge
and you see the chopper and here in the
quick selection menu you can change to
no sit back or sit back and you click
apply to read it chamfer you
double-click on it and for example we
choose the distance equal distances and
here we have a distance with an angle
for example we can change it to 30 the
face can select the face the edge 3 this
edge okay
the last type of Shaffer the this two
different distances and we already
discussed about that d2d chamfer so if
you saw that tutorial this
George this will be familiar for you so
this is their talked to distances
different distances here you can select
the edge and okay
you can notice we have a five by two